Panasonic NV-GS75GN operating instructions Audio dubbing, Before recording with audio dubbing

Edit mode

Audio dubbing

You can add music or narration to the recorded cassette.

≥Set to Tape Playback Mode.

1Insert an external microphone securely into the [REMOTE/MIC] terminal as far as it will go.

REMOTE/MIC

2Find a scene that you want to add sound to, and press the [;] button on the remote control.

V/REW	PLAY	FF/W	;
			W
STILL ADV	PAUSE	STILL ADV	VOL
	STOP

3Press the [A.DUB] button on the remote control to make audio dubbing ready.

ZOOM	A.DUB ;
T

¥REC A.DUB

V/REW PLAY FF/W

W

STILL ADV PAUSE STILL ADV VOL

4Press the [;] button on the remote control to start audio dubbing.

V/REW	PLAY	FF/W	A.DUB ¥
			W
STILL ADV	PAUSE	STILL ADV	VOL
	STOP

≥Talk into the microphone.

5Press the [;] button on the remote control to stop audio dubbing.

V/REW PLAY FF/W

W

STILL ADV PAUSE STILL ADV VOL

≥If a tape has a non-recorded portion when the tape is dubbed, images and sounds may be disturbed when this portion of the tape is played back.

ªBefore recording with audio dubbing

≥Set to Tape Recording Mode.

≥When you want to preserve the original sound taken during recording, set [SETUP] >> [AUDIO REC] >> [12bit] to take pictures. (When set [16bit], the sounds taken during recording are erased after recording with audio dubbing.)

≥Set [BASIC] >> [REC SPEED] >> [SP] to take pictures.

ªTo play back the sound recorded with

audio dubbing

You can switch between the sound recorded with audio dubbing and the original sound.

Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX]. [ST1]: It only plays back the original sound. [ST2]: It only plays back the sound added by

audio dubbing.

[MIX]: It simultaneously plays back the original sound and the sound added with audio dubbing.

ªTo dub audio while listening to a

pre-recorded sound

≥When pausing the audio dubbing, set the [12bit AUDIO] on the [SETUP] Sub-Menu to [ST2] and you can check the pre-recorded sound.

STOP

39

VQT0N61