Others
5:During playback, [UNPLAYABLE CARD] is displayed.
•The image was either recorded in a different format, or data is damaged.
Others
1:The indication disappears, the screen is frozen, or no operation can be performed.
•Turn off the power to the movie camera. If the power cannot be turned off, press the [RESET] button, or detach the battery or AC adaptor and then reattach it. After that, turn on the power again. If normal operation is still not restored, detach the power connected, and consult the
dealer who you purchased the movie camera from.
2:“PUSH THE RESET SWITCH” is displayed.
• An irregularity in the movie camera has been automatically detected. Remove the cassette or the card for data protection and then press the [RESET] button with the boss A. The movie camera will be activated.
RESET 
A
•If you do not press the [RESET] button, the power to the movie camera is turned off automatically about 1 minute later.
•Even after you press the [RESET] button, the indication may still appear repeatedly. If so, the movie camera needs repair. Detach the power
connected, and consult the dealer who you purchased the movie camera from. Do not attempt to repair the appliance by yourself.
3:Even if connected by the USB cable, the movie camera is not recognized by the PC.
• Is the USB driver installed? For information, refer to the operating instructions for PC connection (separate volume).
4:When the USB cable is disconnected, an error message will appear on PC.
•To disconnect the USB cable safely, double-
click the [
] icon in the task tray and follow the instructions on the screen.
5:The movie camera malfunctions on editing, dubbing from digital video equipment, or
using “MotionDV STUDIO 5.3E LE for DV”.
•If a tape is recorded in multiple modes such as SP and LP (recording mode), 12bit and 16bit (sound recording mode), normal and wide, recorded and unrecorded parts, the movie camera may malfunction at a point where the mode switches. When you edit, do not record in
multiple modes.
6: The warning/alarm indication [°] appears when the camera is operated in the WEB camera mode.
•Did you press the menu button or the recording start/stop button? You cannot use the menu or record onto the tape/card in the WEB camera mode.
•Is the setting for the remote control correct?
•Did you attempt to play a tape without inserting it? Insert a tape.
•Did you attempt to play a tape with copyright protection (copy guard)? Pictures of the tape with copyright protection (copy guard) cannot be displayed on the PC. (The audio of the tape can be played.)
•Is the video stream driver installed? For details, refer to the operating instructions for PC connection.
Cautions for Use
In the event of abnormal operation (e.g. if the unit emits smoke or an unusual smell), immediately stop operating the unit and consult the Panasonic Customer Care Centre on 132600.
ªAbout condensation
If you turn the movie camera on when condensation occurs on the head or the tape, condensation Indication [3] (yellow or red) is displayed on the viewfinder or the LCD monitor and the messages [3DEW DETECT] or [3EJECT TAPE] (only when the tape is inserted) appear. If so, follow the procedure below.
3in yellow:
Dews are slightly adhering on the head or the tape.
3in red:
Dews are adhering on the head or the tape.
1Remove the tape if it is inserted.
≥It takes about 20 seconds to open the cassette holder. This is not a malfunction.
2Leave the movie camera with the cassette cover closed to cool or warm it to the ambient temperature.
51
VQT0N61