
_Memory card
When the power/card access lamp is Blinking (when the card is being read), do not remove the card, turn the power off, or subject it to vibration or impact.
Do not leave the card in places where there is high temperature or direct sunlight, or where electromagnetic waves or static electricity are easily generated. Do not bend, drop, or subject it to strong vibration.
•If the above precautions are not taken, the card or the recorded content may be damaged.
Be sure to pull out and store the card after use.
•Keep the card in the storage bag to store or carry the card around.
•Do not allow dirt, dust or water to enter the terminals on the back of the card. Do not touch it with your fingers.
_Picture data
•As a result of improper operations, recorded data may be damaged or erased. We are not responsible for the loss caused by the erasure of the recording data.
•When this message is displayed “PLEASE WAIT”, never remove the battery or the card, and do not disconnect the AC adapter (supplied) out. It may cause damage to the data and malfunctions.
71