Panasonic PV-DC1580 operating instructions Using the Digital Photo Printer, Stamp Print Marker

Using the Digital Photo Printer

Images can be selected for print out on a digital photo printer (sold separately).

1 2

LED Lamp

3

Stamp Print Marker

1 Set the POWER switch to PLAY.

P10 FINE

•The LED Lamp lights up.

2 Press (+) or (−) repeatedly to select the images you want to mark for printing.

•You can mark images in either Manual Playback Mode (see page 22), or Multi- Image Playback Mode (see page 24).

3 Press IRIS to stamp a print mark on the image. A " " mark will appear on the image.

10FINE

•Press IRIS again to cancel the print mark.

•Hold IRIS for more than 5 seconds to delete all print marks.

Printing on a Digital Photo Printer

1 Remove the CompactFlash Card containing the captured images from the camera and insert it into the PCMCIA Adapter (see page 31).

2 Connect the PCMCIA Adapter (in- cluded with printer) to the Digital Photo Printer*.

•*Requires a Digital Photo Printer PV-PD2000 (sold separately).

•Insert the adapter in the direction of the arrow and push the card fully into the printer.

3 Turn on the printer and set the INPUT SELECT (VIDEO/PC CARD) Switch to the PC CARD position.

•The Printer access lamp will flash.

4 Slide the AUTO PRINT Lever. Printing

of print marked images begins.

•Please refer to the printer's operating instructions for detail on printing.

•Moving the AUTO PRINT Lever during the reading of the CompactFlash Card (ACCESS Lamp is flashing) may prevent proper printing of the images. Wait until the ACCESS Lamp turns off before moving the AUTO PRINT Lever.

37