Edit mode
Audio dubbing
You can add music or narration to the recorded cassette.
$Set to Tape Playback Mode.
1Insert an external microphone securely into the [MIC] terminal as far as it will go.
MIC
2Find a scene that you want to add sound to, and press the [4] button on the remote control.
!
3Press the [AUDIO DUB] button on the remote control to make audio dubbing ready.
A.DUB !
4Press the [4] button on the remote control to start audio dubbing.
A.DUB "
$Talk into the microphone.
5Press the [4] button on the remote control to stop audio dubbing.
%Before recording with audio dubbing $Set to Tape Recording Mode.
$When you want to preserve the original sound taken during recording, set [SETUP] >> [AUDIO REC] >> [12bit] to take pictures. (When set [16bit], the sounds taken during recording are erased after recording with audio dubbing.)
$Set [BASIC] >> [REC SPEED] >> [SP] to take pictures.
%To play back the sound recorded with
audio dubbing
You can switch between the sound recorded with audio dubbing and the original sound.
Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX]. [ST1]: It only plays back the original sound. [ST2]: It only plays back the sound added by
audio dubbing.
[MIX]: It simultaneously plays back the original sound and the sound added with audio dubbing.
%To dub audio while listening to a
pre-recorded sound
$When pausing the audio dubbing, set the [12bit AUDIO] on the [SETUP]
$If a tape has a
41
VQT0T87