Edit mode
5Start recording.
6Stop recording.
7Move the joystick down to select the [5] icon to stop playback.
$For more information, refer to the operating instructions for your TV set and recorder.
$When you do not need functional indications or date and time indications, press the
[EXT DISPLAY] button on the remote control for no indication. (When you connect the movie camera and a recorder with the DV cable, these indications may not appear.)
%When neither image nor sound from the movie camera is output to the TV
set
$Check that the plugs are inserted as far as they go.
$Check the connected terminal.
$When no image is presented on the TV even if set [BASIC] >> [AV JACK] >> [OUT/&], set to [OUT].
Using the DV Cable for Recording (Digital Dubbing)
By connecting other digital video equipment with DV terminal and the movie camera by using the DV cable
This model cannot be used as a Recorder. $Set to Tape Playback Mode. (Player/
recorder)
1Connect the movie camera and digital video equipment with the DV cable.
DV
1
DV
2Start playback. (Player)
3Start recording. (Recorder)
4Stop playback. (Player)
$Do not plug or unplug the DV cable during dubbing, or the dubbing may not be completed properly.
$Even if you use a device equipped with DV terminals such as IEEE1394, you may not be able to perform digital dubbing in some cases. For more information, see the instructions for equipment connected.
$Regardless of the menu settings on the recorder, digital dubbing is carried out in the same mode as the [AUDIO REC] mode of the playback tape.
$The images on the recorder monitor may be disturbed, but it does not affect the recorded images.
40
VQT0T87