Before using
ªTo use as a grip belt
Adjust the belt length so it fits your hand.
1Adjust the belt length and the pad position.
2
1 3
1Flip the belt.
2Adjust the length.
3 Fix the belt.
Using the LCD monitor
You can record the image while viewing it on the LCD monitor opened.
1Put a finger on the LCD monitor open part and pull the LCD monitor out in the direction of the arrow.
OPEN
≥The viewfinder will go off.
≥It can open up to 90o.
2Adjust the angle of the LCD monitor as you prefer.
1 180o | 2 90o |
≥It can rotate up to 180o 1 towards the lens or 90o 2 towards the viewfinder.
≥The brightness and colour level of the LCD monitor can be adjusted from the menu.
≥If it is forcibly opened or rotated, the camera may be damaged or fail.
≥Check that the card slot cover is closed. ≥When the LCD monitor is rotated by 180o
towards the lens (when recording yourself), the LCD monitor and the viewfinder will be simultaneously activated.
Using the viewfinder
ªExtending the viewfinder
1Pull out the viewfinder and extend it by pinching the extension knob.
ªAdjusting the field of view
1Adjust the focus by sliding the eyepiece corrector knob.
12:30:45 |
| 12:30:45 |
1.4.2005 |
| 1.4. 2005 |
≥You can adjust the brightness of the viewfinder from the menu.
Power supply
ªCharging the battery
When this product is purchased, the battery is not charged. Charge the battery before using this product.
≥Battery charging time
≥We recommend using Panasonic batteries.
≥If you use other batteries, we cannot guarantee the quality of this product.
≥If the DC input lead is connected to the AC adaptor, then the battery will not get charged.
Remove the DC input lead from the AC adaptor.
1Connect the AC mains lead to the AC adaptor and the AC mains socket.
2Put the battery on the battery mount by aligning the mark, and then securely plug it in.
8
VQT0N50