Panasonic NV-GS90 operating instructions Inserting/removing a cassette, To cancel Quick Start

Page 15

Before using

ªTo cancel Quick Start

1Set [SETUP] >> [QUICK START] >> [OFF]. (-18-)

≥The status indicator goes off and the power turns off if the mode dial is set to OFF while the unit is in quick start standby mode.

≥If the standby continues for approx. 30 minutes, then the status indicator will go off and the camera will be completely turned off.

≥In the following cases, quick start is cancelled and the power turns off.

≥When the Mode dial is moved.

≥When the battery or AC adaptor is removed. ≥When the tape is removed while using the

battery in Tape Recording Mode. ≥When the movie camera is quick-started with

the white balance on automatic, it may take some time until the white balance is adjusted if the scene being recorded has a light source different from the scene last recorded. (When the colour night view function is used, however, the white balance of the scene last recorded is retained.)

≥If the power is turned on in quick start standby mode, the zoom magnification becomes 2k and the picture size may differ from what it was before quick start standby mode.

≥If [POWER SAVE] (-39-) is set to [5 MINUTES] and the unit automatically goes into quick start standby mode, close the LCD monitor and retract the viewfinder and then open the LCD monitor or extend the viewfinder again.

Inserting/removing a cassette

1Fit the AC adaptor or the battery and turn on the power.

2Slide the [OPEN/EJECT] lever and open the cassette cover.

OPEN/

EJECT

≥When the cover is fully opened, the cassette holder will come out.

3After the cassette holder is opened, insert/ remove the cassette.

≥When inserting a cassette, orient it as shown in the figure, and then securely insert it as far as it goes.

≥When removing, pull it straight out.

4Push the [PUSH] mark 1 in order to close the cassette holder.

1

PUSH

≥The cassette holder is housed.

Caution:

Take care not to trap your fingers under the cassette holder when closing it.

5Only after the cassette holder is completely housed, close the cassette cover tightly.

≥When inserting a previously recorded cassette, use the blank search function to find the position where you want to continue recording. If you are overwriting a previously recorded cassette, be sure to find the position where you want to continue recording.

≥When closing the cassette cover, do not get anything, such as a cable, caught in the cover.

15

LSQT1291

Page 14 Page 16
Image 15
Page 14 Page 16
Contents
Operating Instructions Before use How to replace the fuseOperating instructions Information for Your SafetyUse only the recommended accessories Carefully observe copyright lawsFor business users in the European Union Contents Sales and Support Information Before usingAccessories OptionalParts identification and handling CameraViewfinder -14 LCD monitor open part Speaker Adjust the belt length and the pad positionGrip belt LCD monitor -13Slide the lens cover open/close switch to Using the lens coverPower supply Charging the batteryConnecting to the AC outlet Fitting the batteryRemoving the battery Charging time and recordable time Selecting a mode Turning the camera on/offHow to turn on the power ≥Rotate the mode dial slowly≥The power does not turn off even if How to turn off the power 1 Set the mode dial to OFF≥Set to Tape Recording Mode Set Basic Clock SET YES Setting date and timeUsing the LCD monitor Recharging the built-in lithium batteryExtending the viewfinder Using the viewfinderAdjusting the field of view Quick startTo cancel Quick Start Inserting/removing a cassettePush the Push mark 1 in order to close the cassette holder How to use the joystick Help mode To exit the Help modeTape Playback Mode To exit the menu screen Switching the languageUsing the menu screen About the menu settingRecording with the built-in LED video light Adjusting LCD monitor/viewfinderAdjusting the brightness and colour Level To cancel the built-in LED video lightCheck before recording Record modeConcerning the remaining tape time Indication on the screen On-screen display in the tape recording modeRecording on a tape Recording checkContinuous photoshot Blank search functionRecording a still picture on a tape Photoshot Stopping blank search midway ThroughTo use the zoom microphone function Zoom in/out functionDigital zoom function About the variable speed zoom FunctionRecording yourself Backlight compensation functionTo return to normal recording Colour night view function Soft skin modeTo cancel the colour night view function To cancel the soft skin modeWind noise reduction function To cancel the wind noise reduction FunctionTo cancel fading Fade in/fade out functionWide/43 function Image stabilizer functionGuideline function To cancel the scene mode function Auto slow shutter modeRecording in various situations Scene mode To cancel the slow shutter modeRecording in natural colours White balance About flashing of the indication Manual focus adjustmentTo restore to the automatic Adjustment To set the white balance manuallyIris/gain value range Manual shutter speed/aperture adjustmentTo restore to automatic adjustment Shutter speed rangePlaying back tape Playback modeTo adjust volume Settings on the audioFrame-by-frame playback Playback on TVTo return to normal playback Copying onto a DVD recorder or a VCR Dubbing Edit modeStart the Windows Live Messenger Using the DV Cable for Recording Digital DubbingUsing the movie camera as a Web Camera SoftwareOperating environment on iMovie HD Using on MacintoshWhen you use the movie camera as a Web Camera CPU PowerPC G5 Intel Core Duo Intel Core Solo InterfaceLSQT1291 Tape Playback Menu MenuMenu list Tape Recording MenuMenus related to taking pictures Menus related to playbackOther menus Recording indications OthersIndications Basic indicationsTextual indications Confirmatory indicationsFunctions cannot be used simultaneously Before requesting repair Problems and solutionsCassette is correctly inserted Cassette cannot be removedNo operation other than cassette removal can be performed RecordingPlayback Pictures Push the Reset Switch is displayedDifferent sounds are reproduced at the same time Sounds cannot be played backAbout dirty heads About condensationWhile carrying the movie camera, do not drop or bump it About the movie cameraDo not throw old battery into fire About the batteryBe sure to detach the battery after use Prepare spare batteries when going out for recordingPeriodical check-ups About the cassette LCD monitor/viewfinderAuto focus Explanation of termsAutomatic white balance White balanceSpecifications SpecificationsNumerics IndexWeb site http//panasonic.net