Panasonic NV-GS90 operating instructions Functions cannot be used simultaneously

Page 42

Others

Functions cannot be used simultaneously

Some functions in the movie camera are disabled or cannot be selected due to its specifications. The table below shows examples of functions restricted by conditions.

Functions

Conditions which disable

 

the functions

 

 

≥Backlight

≥When the iris/gain is set

compensation

≥When the colour night

 

view function is used

 

 

≥Help mode

≥While recording to a tape

≥Blank search

 

≥Soft skin

 

≥Recording

 

check

 

≥Colour Night

 

View

 

 

 

≥Scene mode

≥When the movie camera

 

is set to [AUTO]

 

≥When the colour night

 

view function is used

 

≥When the built-in LED

 

video light is on

 

 

≥Change of

≥When digital zoom (42k

white balance

or higher) is used

 

≥When the colour night

 

view function is used

 

 

≥Adjusting the

≥When the colour night

shutter speed,

view function is used

iris/gain

≥When the scene mode is

 

used

 

 

Before requesting repair (Problems and solutions)

Power/Body

1:The movie camera power cannot be turned on.

•Is the battery fully charged? Use a fully charged battery.

•The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the movie camera still cannot be used, the battery is faulty.

•Is the LCD monitor open or the viewfinder

extend?

2: The movie camera power is turned off automatically.

•If you do not use the unit for approximately

5 minutes, the power is automatically turned off to conserve the battery charge. To resume recording, turn the power back on. The power will not turn off automatically when the power

save function is set to [OFF]. (-39-)

3:The movie camera power does not stay on long enough.

•Is the battery low? If the remaining battery power indication is flashing or the message “LOW BATTERY” is displayed, the battery has run down. Charge the battery or attach a fully charged battery. (-9-)

•Has condensation occurred? When you carry the movie camera from a cold place into a warm place, condensation may occur inside it. If so, the power is turned off automatically, disabling all operations except for taking cassettes out. Wait until the condensation indication disappears. (-45-)

4: Battery runs down quickly.

•Is the battery fully charged? Charge it with the AC adaptor. (-9-)

•Are you using the battery in an extremely cold place? The battery is affected by ambient temperature. In cold places, the operating time of the battery becomes shorter.

•Has the battery worn out? The battery has a limited life. If the operating time is still too short even after the battery is fully charged, depending on the usage, the battery has worn out and can no longer be used.

42

LSQT1291

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Operating Instructions How to replace the fuse Before useCarefully observe copyright laws Information for Your SafetyUse only the recommended accessories Operating instructionsFor business users in the European Union Contents Optional Before usingAccessories Sales and Support InformationParts identification and handling CameraViewfinder -14 LCD monitor -13 Adjust the belt length and the pad positionGrip belt LCD monitor open part SpeakerCharging the battery Using the lens coverPower supply Slide the lens cover open/close switch toConnecting to the AC outlet Fitting the batteryRemoving the battery ≥Rotate the mode dial slowly Selecting a mode Turning the camera on/offHow to turn on the power Charging time and recordable timeHow to turn off the power 1 Set the mode dial to OFF ≥The power does not turn off even ifRecharging the built-in lithium battery Setting date and timeUsing the LCD monitor ≥Set to Tape Recording Mode Set Basic Clock SET YESQuick start Using the viewfinderAdjusting the field of view Extending the viewfinderTo cancel Quick Start Inserting/removing a cassettePush the Push mark 1 in order to close the cassette holder How to use the joystick Help mode To exit the Help modeTape Playback Mode About the menu setting Switching the languageUsing the menu screen To exit the menu screenTo cancel the built-in LED video light Adjusting LCD monitor/viewfinderAdjusting the brightness and colour Level Recording with the built-in LED video lightRecord mode Check before recordingRecording check On-screen display in the tape recording modeRecording on a tape Concerning the remaining tape time Indication on the screenStopping blank search midway Through Blank search functionRecording a still picture on a tape Photoshot Continuous photoshotAbout the variable speed zoom Function Zoom in/out functionDigital zoom function To use the zoom microphone functionRecording yourself Backlight compensation functionTo return to normal recording To cancel the soft skin mode Soft skin modeTo cancel the colour night view function Colour night view functionFade in/fade out function To cancel the wind noise reduction FunctionTo cancel fading Wind noise reduction functionWide/43 function Image stabilizer functionGuideline function To cancel the slow shutter mode Auto slow shutter modeRecording in various situations Scene mode To cancel the scene mode functionRecording in natural colours White balance To set the white balance manually Manual focus adjustmentTo restore to the automatic Adjustment About flashing of the indicationShutter speed range Manual shutter speed/aperture adjustmentTo restore to automatic adjustment Iris/gain value rangeSettings on the audio Playback modeTo adjust volume Playing back tapeFrame-by-frame playback Playback on TVTo return to normal playback Edit mode Copying onto a DVD recorder or a VCR DubbingSoftware Using the DV Cable for Recording Digital DubbingUsing the movie camera as a Web Camera Start the Windows Live MessengerCPU PowerPC G5 Intel Core Duo Intel Core Solo Interface Using on MacintoshWhen you use the movie camera as a Web Camera Operating environment on iMovie HDLSQT1291 Tape Recording Menu MenuMenu list Tape Playback MenuMenus related to taking pictures Menus related to playbackOther menus Basic indications OthersIndications Recording indicationsConfirmatory indications Textual indicationsBefore requesting repair Problems and solutions Functions cannot be used simultaneouslyRecording Cassette cannot be removedNo operation other than cassette removal can be performed Cassette is correctly insertedSounds cannot be played back Push the Reset Switch is displayedDifferent sounds are reproduced at the same time Playback PicturesAbout condensation About dirty headsAbout the movie camera While carrying the movie camera, do not drop or bump itPrepare spare batteries when going out for recording About the batteryBe sure to detach the battery after use Do not throw old battery into fireAbout the cassette LCD monitor/viewfinder Periodical check-upsWhite balance Explanation of termsAutomatic white balance Auto focusSpecifications SpecificationsIndex NumericsWeb site http//panasonic.net
Top Page Image Contents