Panasonic NV-GS90 About the cassette LCD monitor/viewfinder, Periodical check-ups

Page 48

Others

ª About the cassette

ª LCD monitor/viewfinder

Never place the cassette in a high temperature

LCD monitor

place.

When the LCD monitor gets dirty, wipe it with a

The tape may be damaged, producing

 

dry soft cloth.

mosaic-like noise at the time of playback.

In a place with drastic temperature changes,

When storing the cassette after use, be sure

 

condensation may form on the LCD monitor.

to rewind the tape to the beginning and take it

 

Wipe it with soft dry cloth.

If your movie camera is extremely cold, the LCD

out.

 

monitor is slightly darker than usual immediately

If the cassette is left for more than 6 months

 

 

after you turn the power on. However, as the

(depending on the storage condition) in the

 

 

internal temperature increases, it goes back to

movie camera or stopped midway, the tape may

 

 

normal brightness.

sag and be damaged.

 

 

 

Once every 6 months, wind the tape to the end

 

Extremely high precision technology is

and then rewind it to the beginning. If the

 

 

employed to produce the LCD monitor

cassette is left for 1 year or longer without

 

 

screen featuring a total of approximately

winding or rewinding, the tape may be deformed

 

 

123,000 pixels. The result is more than

by expansion or shrinkage attributable to

 

 

99.99% effective pixels with a mere 0.01% of

temperature and humidity. The wound tape may

 

 

the pixels inactive or always lit. However,

stick to itself.

 

 

this is not a malfunction and does not affect

Dust, direct sunlight (ultraviolet rays), and

 

 

the recorded picture.

humidity may damage the tape. Such usage

 

 

 

may cause damage to the movie camera and

Viewfinder

the heads.

 

 

After use, be sure to rewind the tape to the

 

Extremely high precision technology is

beginning, put the cassette in the case to

 

employed to produce the viewfinder screen

protect it from dust, and store it upright.

 

featuring a total of approximately 113,000

Keep the cassette away from strong

 

pixels. The result is more than 99.99%

magnetism.

 

effective pixels with a mere 0.01% of the

Apparatuses using magnets such as magnetic

 

pixels inactive or always lit. However, this is

necklaces and toys have magnetic force that is

 

not a malfunction and does not affect the

stronger than expected, and they may erase the

 

recorded picture.

contents of a recording or may increase noise.

 

 

ª Periodical check-ups

 

 

To maintain the highest image quality, we

 

 

recommend replacing worn parts such as heads

 

 

after approx. 1000 hours of use. (This, however,

 

 

depends on operating conditions including

 

 

temperature, humidity and dust.)

48

LSQT1291

Image 48 Contents
Operating Instructions How to replace the fuse Before useInformation for Your Safety Use only the recommended accessoriesCarefully observe copyright laws Operating instructionsFor business users in the European Union Contents Before using AccessoriesOptional Sales and Support InformationParts identification and handling CameraViewfinder -14 Adjust the belt length and the pad position Grip beltLCD monitor -13 LCD monitor open part SpeakerUsing the lens cover Power supplyCharging the battery Slide the lens cover open/close switch toConnecting to the AC outlet Fitting the batteryRemoving the battery Selecting a mode Turning the camera on/off How to turn on the power≥Rotate the mode dial slowly Charging time and recordable timeHow to turn off the power 1 Set the mode dial to OFF ≥The power does not turn off even ifSetting date and time Using the LCD monitorRecharging the built-in lithium battery ≥Set to Tape Recording Mode Set Basic Clock SET YESUsing the viewfinder Adjusting the field of viewQuick start Extending the viewfinderTo cancel Quick Start Inserting/removing a cassettePush the Push mark 1 in order to close the cassette holder How to use the joystick Help mode To exit the Help modeTape Playback Mode Switching the language Using the menu screenAbout the menu setting To exit the menu screenAdjusting LCD monitor/viewfinder Adjusting the brightness and colour LevelTo cancel the built-in LED video light Recording with the built-in LED video lightRecord mode Check before recordingOn-screen display in the tape recording mode Recording on a tapeRecording check Concerning the remaining tape time Indication on the screenBlank search function Recording a still picture on a tape PhotoshotStopping blank search midway Through Continuous photoshotZoom in/out function Digital zoom functionAbout the variable speed zoom Function To use the zoom microphone functionRecording yourself Backlight compensation functionTo return to normal recording Soft skin mode To cancel the colour night view functionTo cancel the soft skin mode Colour night view functionTo cancel the wind noise reduction Function To cancel fadingFade in/fade out function Wind noise reduction functionWide/43 function Image stabilizer functionGuideline function Auto slow shutter mode Recording in various situations Scene modeTo cancel the slow shutter mode To cancel the scene mode functionRecording in natural colours White balance Manual focus adjustment To restore to the automatic AdjustmentTo set the white balance manually About flashing of the indicationManual shutter speed/aperture adjustment To restore to automatic adjustmentShutter speed range Iris/gain value rangePlayback mode To adjust volumeSettings on the audio Playing back tapeFrame-by-frame playback Playback on TVTo return to normal playback Edit mode Copying onto a DVD recorder or a VCR DubbingUsing the DV Cable for Recording Digital Dubbing Using the movie camera as a Web CameraSoftware Start the Windows Live MessengerUsing on Macintosh When you use the movie camera as a Web CameraCPU PowerPC G5 Intel Core Duo Intel Core Solo Interface Operating environment on iMovie HDLSQT1291 Menu Menu listTape Recording Menu Tape Playback MenuMenus related to taking pictures Menus related to playbackOther menus Others IndicationsBasic indications Recording indicationsConfirmatory indications Textual indicationsBefore requesting repair Problems and solutions Functions cannot be used simultaneouslyCassette cannot be removed No operation other than cassette removal can be performedRecording Cassette is correctly insertedPush the Reset Switch is displayed Different sounds are reproduced at the same timeSounds cannot be played back Playback PicturesAbout condensation About dirty headsAbout the movie camera While carrying the movie camera, do not drop or bump itAbout the battery Be sure to detach the battery after usePrepare spare batteries when going out for recording Do not throw old battery into fireAbout the cassette LCD monitor/viewfinder Periodical check-upsExplanation of terms Automatic white balanceWhite balance Auto focusSpecifications SpecificationsIndex NumericsWeb site http//panasonic.net