Panasonic NV-GS35GN Setting date and time, Adjusting LCD monitor/viewfinder, About date/time

Page 14

Before using

3Press the [MENU] button to exit the menu screen.

VAR.

SEARCHMENU

ENTER

Setting date and time

If the screen shows the incorrect date/time, then adjust it.

≥Set to Tape Recording Mode or Card

Recording Mode.

1Set [BASIC] >> [CLOCK SET] >> [YES].

2Move the joystick left or right in order to select the item to be set. Then move the joystick up or down to set the desired value.

≥The year will change as follows: 2000, 2001, ..., 2089, 2000, ...

≥The 24-hour clock is used.

3Press the joystick to determine the setting.

≥The clock function starts at [00] seconds.

ªAbout date/time

≥The date and time function are driven by a built- in lithium battery.

≥Make sure to check the time before recording because the built-in clock is not very accurate.

ªRecharging the built-in lithium battery

≥If [0] or [--] is indicated when the camera is turned on, then the built-in lithium battery runs down. Connect the AC adaptor to the camera or place the battery on the camera, and the built-in lithium battery will be recharged. Leave the camera as is for approx. 24 hours, and the battery will drive the date and time for approx. 6 months. (Even if the [OFF/ON] switch is set to [OFF], the battery is still being recharged.)

WARNING

THE LITHIUM BATTERY IN THIS UNIT MUST ONLY BE REPLACED BY QUALIFIED PERSONNEL. IF THIS IS NECESSARY, CONTACT THE PANASONIC CUSTOMER CARE CENTRE ON 132600 FOR YOUR NEAREST AUTHORIZED SERVICE CENTRE.

Adjusting LCD monitor/viewfinder

ªAdjusting the brightness and colour

level

1Set [SETUP] >> [LCD SET] or [EVF SET] >> [YES].

2Move the joystick up or down in order to

select the item to be adjusted. [LCD SET]

:Brightness of the LCD monitor

:Colour level of the LCD monitor [EVF SET]

EVF :Brightness of the viewfinder

3Move the joystick left or right to move the bar indication representing the brightness.

4Press the [MENU] button or the joystick to complete the settings.

≥In order to adjust the brightness of the viewfinder, close the LCD monitor, and the

viewfinder will be activated.

≥When the LCD monitor is rotated by 180° towards the lens, the brightness of the LCD monitor cannot be adjusted.

≥These settings will not affect the images actually recorded.

14

LSQT0893

Image 14

Contents NV-GS25GN Information for your safety Contents Optional Before usingAccessories Parts identification and handlingViewfinder -7 Fitting the lens cap Using the LCD monitorAdjust the belt length Grip beltUsing the viewfinder Power supplyCharging time and recordable time Fitting the batteryRemoving the battery Connect the DC input lead to this productInserting/removing a cassette When the cassette holder does not Come outWhen the cassette holder cannot be Housed Inserting/removing the cassetteConcerning the card Card access lampInserting/removing a card SD Memory CardTurning the camera on Selecting a modeHow to use the joystick Card recording mode AUTO/MANUAL/FOCUS switch is set to Auto Tape recording mode AUTO/MANUAL/FOCUS switch is set to AutoTape playback mode Soft skin mode Backlight compensationSwitching the language Using the menu screenRecharging the built-in lithium battery Setting date and timeAdjusting LCD monitor/viewfinder Adjusting the brightness and colour LevelInstall a button-type battery Using the remote controlRemote control Remote control usable rangeConcerning the button-type battery Free style remote controlSelecting the remote control mode Connect the free style remote control To the cameraRecording with the built-in LED video light NV-GS35 only Press the Light button ≥The gain up mode is set to off≥To eliminate ghost images, use this mode Press the Light buttonRecord mode Check before recordingConcerning the remaining tape time Indication on the screen On-screen display in the tape recording modeRecording on a tape Recording still pictures onto a card Photoshot Check the recordingBlank search function Select the picture quality for photoshot images Zoom in/out functionProgressive Photoshot Recording with a shutter operation EffectQuick start To cancel the quick start when Power is OFFRecording yourself To use the zoom microphone functionNight view functions Soft skin modeBacklight compensation function Wind noise reduction function Self-timer recordingFade in/fade out function Recording images for wide-screen TVs To cancel the Cinema functionTo cancel the image stabilizer function Image stabilizer functionTo stop continuous photoshot Midway through Recording in various situations Scene modeContinuous Photoshot Recording in natural colours White balance To cancel the scene mode functionTo restore to the automatic Adjustment To set the white balance manuallyAbout flashing of the indication Manual focus adjustmentManual shutter speed/aperture adjustment About the white balance sensorManual iris/gain adjustment To restore to automatic adjustmentManual shutter speed adjustment Shutter speed rangeSlow-motion playback/ frame-by-frame playback Playback modePlaying back tape To return to normal playback Press the 1 button on the remote controlVariable-speed search function Frame-by-frame playbackTo display the on-screen information On the TV Playback on TVPlaying back card About the compatibility of still pictures Deleting files recorded on a cardTo display multiple playback files To delete all filesFormatting a card Writing the printing data on a card Dpof settingTo complete the settings Protecting files on a cardTo set so that all pictures are not Printed What is DPOF?Select Cancel ALL in Step Recording from a tape onto a card Edit modeEdit mode Copying onto a DVD recorder or a VCR DubbingUsing the DV Cable for Recording Digital Dubbing To cancel the standby for recordingBefore recording with audio dubbing ≥Set to Tape Playback ModeAudio dubbing To play back the sound recorded with Audio dubbingTape Recording Menu MenuMenu list Tape Playback MenuBasic DATE/TIME -41-PROTECT Card Recording MenuPicture Playback Menu Other menus Menus related to taking picturesMenus related to playback Others IndicationsConfirmatory indications Textual indicationsChange to Manual Mode Functions cannot be used simultaneouslyMovie camera power is turned off automatically Before requesting repair Problems and solutionsPower/Body Movie camera power cannot be turned on Movie camera power does not stay on long enoughNo operation other than cassette removal can be performed Remote control does not functionCassette cannot be removed Screen has changed suddenlyAudio dubbing cannot be performed Original sound was erased when audio dubbing was performedDifferent sounds are reproduced at the same time Sounds cannot be played backDuring playback, Unplayable Card is displayed Push the Reset Switch is displayedUsing MotionDV Studio 5.3E LE for DV Dealer who you purchased the movie camera fromAbout the movie camera About condensationAbout dirty heads Prepare spare batteries when going out for recording About the batteryBe sure to detach the battery after use While carrying the movie camera, do not drop or bump itAbout the card About the AC adaptorAbout the cassette Folder structure of the cardPeriodical check-ups Explanation of termsLCD monitor/viewfinder Automatic white balanceWhite balance Auto focusSpecifications SpecificationsSpecifications Http//panasonic.co.jp/pavc/global/csAC adaptor F0105Ke0 7000 a