Record mode
ªAbout flashing of the [ 
] indication
When the manual adjustment mode is selected
≥Flashing indicates that the white balance previously adjusted is stored. This setting is stored until the white balance is adjusted again.
When white balance cannot be set in the manual adjustment mode
≥White balance may not be adjusted properly in the manual adjustment mode in dark places. If so, use the auto white balance mode.
During setting in the manual adjustment mode
≥When the setting is completed, it will keep lit.
ªAbout the white balance sensor
The white balance sensor detects the type of light source during recording.
≥Do not cover the white balance sensor during recording, or it may not function properly.
Manual focus adjustment
If auto focusing is difficult due to the conditions, then manual focusing is available.
≥Set to Tape/Card Recording Mode.
1Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL].
AUTO MANUAL
FOCUS
2Set the [AUTO/MANUAL/FOCUS] switch to [FOCUS].
AUTO MANUAL
FOCUS
MNL
MF
≥The MNL and the manual focus indication [MF] will be displayed.
3Move the joystick left or right in order to adjust the focus.
MNL
MF
≥When focused with a wide angle, the subject may not be in focus when zoomed in. First, zoom in on the subject, and then focus on it.
ªTo restore to the automatic
adjustment
Set the [AUTO/MANUAL/FOCUS] switch to [AUTO] or [FOCUS].
Manual shutter speed/aperture adjustment
Shutter Speed
Adjust it when recording
Aperture
Adjust it when the screen is too bright or too dark. ≥Set to Tape/Card Recording Mode.
1Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL].
AUTO MANUAL
FOCUS
2Move the joystick down until the shutter speed indication or aperture value indication appears.
|
|
| MNL |
|
|
| 1/50 |
|
|
| OPEN |
|
|
| OdB |
1) | MNL | 2) | MNL |
1/1000 |
|
| 1/50 |
|
|
| F2.0 |
|
|
| 0dB |
1)Shutter speed
2)(Aperture) Iris/gain value
3Move the joystick left or right in order to adjust the shutter speed or aperture.
28
LSQT0893