Panasonic PV-GS34PKG Formatting a Card, Playing Back on Your TV, Set Advance Card Format YES

Page 36

Playback Mode

3 Repeat Step 2 and press the [MENU] Button

28when the setup is completed.

•The SD Memory Card has a write protection switch. (p. 55)

•For other notes concerning this item, see page 55.

Formatting a Card

If a Card becomes unreadable by the Camcorder, format it for reuse. Formatting erases all the data recorded on a Card.

•When formatting the card all protected files (lock) are also deleted.

•Set to Picture Playback Mode.

•The One-Touch Navigation icon is displayed on the lower right of the screen.

1 Set [ ADVANCE] >> [ CARD FORMAT] >> [YES].

33

28

• A confirmation message appears, select [YES]

and formatting will be carried out.

 

CARD FORMAT

DELETES ALL DATA

 

NO

 

 

YES

 

SETUP

ENTER

EXIT

• When the formatting is completed, the screen

becomes white.

 

 

• It may not be possible to use a Card formatted by

this Camcorder on another unit. In this case, format

the Card on the unit which will use the Card. Make

sure that valuable pictures are stored on your PC

before proceeding.

 

 

• Normally, it is not necessary to format the card. If

a message appears even though you insert and

remove the card several times, format it.

• If the SD Memory Card is formatted on other

equipment, the time spent for recording may become

longer.

 

 

If the SD Memory Card is formatted on a PC, it

cannot be used on the Camcorder.

Format the SD Memory Card on the Camcorder, in

this case.

 

 

• The Camcorder supports SD Memory Cards

formatted in FAT12 system and FAT16 system

based on SD Memory Card Specifications.

Playing Back on Your TV

By connecting your Camcorder with your TV, the recorded scenes can be viewed on your TV screen.

•Before connecting them, turn off the power of both the Camcorder and TV.

1 Insert a recorded tape into this Camcorder.

2 Connect the [AV OUT] Jack of the Camcorder and the Video and Audio Input Jacks of the TV.

[VIDEO IN] [AUDIO IN]

1

A/V

•Connect to the TV with the AV Cable 1 .

•When plugging the pin plug of the AV cable into the [AV OUT] Jack, plug it in as far as it goes.

3 Turn on this Camcorder and set the Mode Dial 32 to the Tape Playback Mode.

4 Select the input channel on the TV.

5 Move the Joystick Control [▲]

33to select the [ ] to start playback.

•The image and audio are output on the TV.

6 Move the Joystick Control [▼] 33 to select the [ ] to stop playback.

„If the image or audio from this Camcorder is not output on the TV

•Check that the plugs are inserted as far as they go.

•Check the connected terminal.

•Check the TV’s input setting (input switch). (For more information, please read the operating instructions for the TV.)

• For other notes concerning this item, see page 55.

36

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

 

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Operating Instructions Safety Precautions Things You Should KnowAbove markings are located on the appliance bottom cover Telephone Number PANA7262 FCC NoteFCC Caution Important Safety Instructions Precautions To Avoid Shock Hazard ... YourPage Contents Using the Viewfinder Set the OFF/ON Switch 1 to onPower Lamp 2 lights up Inserting a CardRecording a Still Picture on Card Photoshot Playing Back a TapePlaying Back a Card Standard Accessories Parts Identification and Handling„ Camcorder AC Adaptor, DC Cable and AC Cable pp ~12Power Supply Using the AC AdaptorAudio-Video Output Jack AV OUT pp Built-in LED Light pUsing the Battery „ Disconnecting the Power SourceAttach the charged Battery to the Camcorder Charging Time and Available Recording TimeTo Use as a Grip Belt Re-attaching the Lens CapAttaching the Shoulder Strap Inserting a CassetteUsing a Memory Card Optional Easy to Use Mode Dial How to Use the Joystick ControlTurning on the Camcorder Using the Viewfinder/LCD Monitor Using the Menu Screen Adjusting Brightness and Color LevelUsing the LCD Monitor „ To AdjustSelecting Language List of MenusLCD SET EVF SET12bit Audio Setting Date and Time Internal Lithium Battery RechargeSet to Tape/Card Recording Mode Set Basic Clock SET YES „ About date/timeLP Mode Audio Recording ModeSet to Tape Recording Mode Still Advance playback„ On-screen Display in the Tape Recording Mode Recording Simultaneous Motion/Still Record ModeAbout Recording Recording on a TapeRecording a Still Picture on a Card Photoshot Recording Yourself Recording with the Built-in LED Video LightRapidFire Consecutive Photoshot „ To Stop the RapidFire Consecutive Photoshot in ProgressSelf-timer Recording Quick StartZoom In/Out Functions Digital Zoom Function Image Stabilizer FunctionFade In/Out Functions „ To Cancel Fading „ To Cancel the MagicPix FunctionBacklight Compensation Function MagicPix FunctionSoft-Skin Mode Recording in Special Situations Scene ModeWind Noise Reduction Function Cinema FunctionAdjusting White Balance Manually „ To Resume Automatic Adjustment„ To Cancel the Scene Mode Recording in Natural Colors White BalanceManual Shutter Speed Adjustment „ Range of Shutter Speed AdjustmentMove the Joystick Control or 33 to adjust the shutter speed About White Balance SensorManual Iris Adjustment F Number Manual Focus Adjustment„ Range of Iris Adjustment Adjusting the Sound Volume Playing Back a TapeFinding a Scene You Want to Play Back „ To Stop PlaybackStill Playback/Still Advance Playback Playing Back a Memory Card„ To Resume Normal Playback To Select a Desired File and Playing BackSlide Show Deleting the Files Recorded on a Card„ To Stop the Slide Show To Select and Delete FilesWriting Printing Data on a Card Dpof Setting Protecting the Files on a Card Lock Setting„ About the Dpof Formatting a Card Playing Back on Your TVSet Advance Card Format YES Move the Joystick Control 33 to select the to stop playback„ Connecting with the AV Cable Recording from a Tape onto a CardCopying onto a DVD Recorder or a VCR Dubbing To record, and press the Photo Shot ButtonUsing the DV Cable for Recording Digital Dubbing „ To Cancel the Standby for RecordingPC Connection With DV Interface Cable „ To Stop DubbingUsing Camcorder with a PC Using the USB DriverConnecting the Personal Computer Camcorder Using Built-in SD DriveClick Restart if the InstallShield dialog appears Finish installation by following the on-screen instructionsTo Disconnect USB Cable Safely Double clickWindows XP/2000 Windows MeUsing as a Web Camera Installing the Video Stream DriverCommunication Speed Necessary software„ Windows 98SE/Me Users Click the Video Stream Driver„ When you use the Camcorder as a Web Camera Setting up the Windows MessengerWith a PC Using the ArcSoft Software Installation of ArcSoft Software „ For WindowsOperating environment „ For Windows If you no longer need software or driver Uninstall After the completion of setup, click on FinishTo start ArcSoft Software „ For Windows Click ArcSoftAbout the SD Memory Card About the compatibility of the card filesSD Memory Card Optional Files recorded on an SD Memory CardMisc Indications „ To Change the Display Mode „ Power Save ModeInitializing the Modes „ To Display Date/Time Indication„ Concerning the Power Supply „ Alarm Sounds„ Inserting/Removing the Cassette „ Recording on a Card„ Self-timer Recording „ Recording with the Built-in LED Video Light„ Quick Start „ Zoom In/Out Functions„ Soft-Skin Mode „ Scene Mode„ Backlight Compensation Function „ MagicPix Function„ Manual Shutter Speed Adjustment „ Manual Iris Adjustment„ Lock Setting „ Playing Back„ Using the DV Cable for Recording Digital Dubbing „ After Use„ Cautions for Use To protect the Lens, attach the supplied Lens Cap„ About AC Adaptor „ Condensation„ Video Head Clogging and Care „ Optimal Use of the Battery „ Cautions for StorageBefore Requesting Service Problems and Solutions „ LCD Monitor/Viewfinder/Lens HoodCassette cannot be removed No operation other than cassette removal can be performedScreen has changed suddenly Cassette cannot be insertedPush the Reset Switch is displayed Playback picture is not clearCard Recorded pictures are not clear File recorded on a card cannot be deletedUsing the Reset button Explanation of Terms„ Digital Video System „ FocusSpecifications Digital CamcorderCamcorder Accessory System Accessory # DescriptionPrice Camcorder Accessory Order Form VisaRequest for Service Notice Panasonic/Quasar Video Products Limited Warranty Limited WarrantyCustomer Services Directory For hearing or speech impaired TTY users, TTYSpanish Quick Use Guide/Guía Para Uso Rápido NotaAdvertencia del FCC Guía rápida Cómo utilizar la bateríaInserción de una tarjeta de memoria Cómo utilizar el visorGrabación de una imagen fija en tarjeta Photoshot Reproducción de una cintaReproducción de una tarjeta de memoria Index
Top Page Image Contents