Panasonic PV-GS34PKG operating instructions „ Optimal Use of the Battery, „ Cautions for Storage

Page 58

Others

Do not clean the heads excessively. (Excessive cleaning may cause excessive wear of the heads. If the heads are worn, images cannot be played back even after the heads are cleaned.)

If the dirty heads cannot be cleaned with the Head Cleaner, the Camcorder needs to be cleaned at a Servicenter. Please consult a dealer.

Head cleaning due to dirty heads is not considered a malfunction of the product. It is not covered by the warranty.

Periodical Check-up

To maintain the highest image quality, we recommend replacement of worn parts, such as heads, etc., after approximately 1000 hours of use. (This, however, depends on operating conditions, such as temperature, humidity, dust, etc.)

„Optimal Use of the Battery

Battery Characteristics

This Battery is a rechargeable lithium ion battery. Its ability to generate power is based upon the chemical reaction that takes place inside it. This reaction is susceptible to the surrounding temperature and humidity, and, if the temperature is too high or too low, the operating time of the Battery becomes shorter. If the Battery is used in an extremely cold environment, the Battery may operate only for about 5 minutes.

If the Battery becomes extremely hot, a protective function may operate, and the Battery may become unusable for a while.

Be Sure to Detach the Battery after Use

Be sure to detach the Battery from the Camcorder. (If it is left attached to the Camcorder, a minute amount of current is consumed even when the Camcorder power is off.) If the Battery is left attached to the Camcorder for a long time, over-discharge takes place. The Battery may become unusable after it is charged.

Disposing of an Unusable Battery

The Battery has a limited life.

Do not throw the Battery into fire because it may cause an explosion.

Always Keep the Terminals of the Battery Clean

Prevent the terminals from getting clogged with dirt, dust, or other substances. If you drop the Battery accidentally, check to see if the Battery body and terminals are deformed. Attaching a deformed Battery to the Camcorder or AC Adaptor may damage the Camcorder or AC Adaptor.

„Cautions for Storage

Before storing the Camcorder, take the Cassette out and detach the Battery.

Store all the components in a dry place with a relatively stable temperature.

(Recommended Temperature: 15 °C to 25 °C (59 °F

to 77 °F), Recommended Humidity: 40 % to 60 %)

Camcorder

Wrap it with a soft cloth to prevent dust from getting into the Camera.

Do not leave the Camcorder in places that expose it to high temperature.

Battery

Extremely high temperatures or low temperatures will shorten the life of the Battery.

If the Battery is kept in smoky or dusty places, the terminals may rust and cause malfunctions.

Do not allow the Battery terminals to come in contact with metal objects (such as necklaces, hairpins, etc.). This can result in a short circuit or heat generation and, if you touch the Battery in this condition, you may be badly burned.

Store the Battery in a completely discharged state. To store the Battery for a long period of time, we recommend you charge it once every year and store it again after you completely use up the charged capacity.

Cassette

Before storing it, rewind the tape to the beginning. If the Cassette is left for more than 6 months with the tape stopped midway, the tape sags (although it depends on the storage condition). Be sure to rewind to the beginning.

Store the Cassette in its case. Dust, direct sunlight (ultraviolet rays), or humidity may damage the tape. Dust contains hard mineral particles, and dusty Cassettes damage the heads of the Camcorder and other components. Develop a habit of returning the Cassette back to its case.

Once every half year, wind the tape to the end and then rewind it to the beginning. If the Cassette is left for 1 year or longer without winding or rewinding, temperature and humidity changes may cause the Cassette to deform due to swelling, shrinking, and so forth. The wound tape may stick to itself.

Do not place a Cassette near highly magnetic substances or equipment.

The surface of tape is covered with extremely minute magnetic particles, upon which signals are recorded. Magnetic necklaces, toys, etc., have magnetic force that is stronger than you may normally expect, and they may erase the contents of a recording or may cause noise in images and sounds.

Card

When the Card is being read, do not remove the Card, turn off the power, or subject it to vibration or impact.

Do not leave the Card in places where there is high temperature or direct sunlight, or where electromagnetic waves or static electricity are easily generated.

Do not bend or drop the Card. The Card or the recorded content may be damaged.

After use, be sure to remove the Card from the Camcorder.

After usage, store the supplied SD Memory Card in the enclosed bag.

58

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

 

Image 58
Contents Operating Instructions Things You Should Know Safety PrecautionsAbove markings are located on the appliance bottom cover FCC Note Telephone Number PANA7262FCC Caution Important Safety Instructions Precautions To Avoid Shock Hazard ... YourPage Contents Power Lamp 2 lights up Using the ViewfinderSet the OFF/ON Switch 1 to on Inserting a CardPlaying Back a Tape Recording a Still Picture on Card PhotoshotPlaying Back a Card „ Camcorder Standard AccessoriesParts Identification and Handling AC Adaptor, DC Cable and AC Cable pp ~12Audio-Video Output Jack AV OUT pp Power SupplyUsing the AC Adaptor Built-in LED Light pAttach the charged Battery to the Camcorder Using the Battery„ Disconnecting the Power Source Charging Time and Available Recording TimeAttaching the Shoulder Strap To Use as a Grip BeltRe-attaching the Lens Cap Inserting a CassetteUsing a Memory Card Optional How to Use the Joystick Control Easy to Use Mode DialTurning on the Camcorder Using the Viewfinder/LCD Monitor Using the LCD Monitor Using the Menu ScreenAdjusting Brightness and Color Level „ To AdjustSelecting Language List of MenusEVF SET LCD SET12bit Audio Set to Tape/Card Recording Mode Set Basic Clock SET YES Setting Date and TimeInternal Lithium Battery Recharge „ About date/timeSet to Tape Recording Mode LP ModeAudio Recording Mode Still Advance playbackAbout Recording „ On-screen Display in the Tape Recording ModeRecording Simultaneous Motion/Still Record Mode Recording on a TapeRecording a Still Picture on a Card Photoshot RapidFire Consecutive Photoshot Recording YourselfRecording with the Built-in LED Video Light „ To Stop the RapidFire Consecutive Photoshot in ProgressQuick Start Self-timer RecordingZoom In/Out Functions Image Stabilizer Function Digital Zoom FunctionFade In/Out Functions Backlight Compensation Function „ To Cancel Fading„ To Cancel the MagicPix Function MagicPix FunctionWind Noise Reduction Function Soft-Skin ModeRecording in Special Situations Scene Mode Cinema Function„ To Cancel the Scene Mode Adjusting White Balance Manually„ To Resume Automatic Adjustment Recording in Natural Colors White BalanceMove the Joystick Control or 33 to adjust the shutter speed Manual Shutter Speed Adjustment„ Range of Shutter Speed Adjustment About White Balance SensorManual Focus Adjustment Manual Iris Adjustment F Number„ Range of Iris Adjustment Finding a Scene You Want to Play Back Adjusting the Sound VolumePlaying Back a Tape „ To Stop Playback„ To Resume Normal Playback Still Playback/Still Advance PlaybackPlaying Back a Memory Card To Select a Desired File and Playing Back„ To Stop the Slide Show Slide ShowDeleting the Files Recorded on a Card To Select and Delete FilesProtecting the Files on a Card Lock Setting Writing Printing Data on a Card Dpof Setting„ About the Dpof Set Advance Card Format YES Formatting a CardPlaying Back on Your TV Move the Joystick Control 33 to select the to stop playbackCopying onto a DVD Recorder or a VCR Dubbing „ Connecting with the AV CableRecording from a Tape onto a Card To record, and press the Photo Shot ButtonPC Connection With DV Interface Cable Using the DV Cable for Recording Digital Dubbing„ To Cancel the Standby for Recording „ To Stop DubbingUsing Camcorder with a PC Using the USB DriverClick Restart if the InstallShield dialog appears Connecting the Personal Computer CamcorderUsing Built-in SD Drive Finish installation by following the on-screen instructionsWindows XP/2000 To Disconnect USB Cable SafelyDouble click Windows MeCommunication Speed Using as a Web CameraInstalling the Video Stream Driver Necessary software„ Windows 98SE/Me Users Click the Video Stream Driver„ When you use the Camcorder as a Web Camera Setting up the Windows MessengerWith a PC Installation of ArcSoft Software „ For Windows Using the ArcSoft SoftwareOperating environment „ For Windows To start ArcSoft Software „ For Windows If you no longer need software or driver UninstallAfter the completion of setup, click on Finish Click ArcSoftSD Memory Card Optional About the SD Memory CardAbout the compatibility of the card files Files recorded on an SD Memory CardMisc Indications Initializing the Modes „ To Change the Display Mode„ Power Save Mode „ To Display Date/Time Indication„ Inserting/Removing the Cassette „ Concerning the Power Supply„ Alarm Sounds „ Recording on a Card„ Quick Start „ Self-timer Recording„ Recording with the Built-in LED Video Light „ Zoom In/Out Functions„ Backlight Compensation Function „ Soft-Skin Mode„ Scene Mode „ MagicPix Function„ Lock Setting „ Manual Shutter Speed Adjustment„ Manual Iris Adjustment „ Playing Back„ Cautions for Use „ Using the DV Cable for Recording Digital Dubbing„ After Use To protect the Lens, attach the supplied Lens Cap„ Condensation „ About AC Adaptor„ Video Head Clogging and Care „ Optimal Use of the Battery „ Cautions for StorageBefore Requesting Service Problems and Solutions „ LCD Monitor/Viewfinder/Lens HoodScreen has changed suddenly Cassette cannot be removedNo operation other than cassette removal can be performed Cassette cannot be insertedCard Recorded pictures are not clear Push the Reset Switch is displayedPlayback picture is not clear File recorded on a card cannot be deleted„ Digital Video System Using the Reset buttonExplanation of Terms „ FocusSpecifications Digital CamcorderAccessory # Description Camcorder Accessory SystemPrice Camcorder Accessory Order Form VisaRequest for Service Notice Panasonic/Quasar Video Products Limited Warranty Limited WarrantyCustomer Services Directory For hearing or speech impaired TTY users, TTYNota Spanish Quick Use Guide/Guía Para Uso RápidoAdvertencia del FCC Inserción de una tarjeta de memoria Guía rápidaCómo utilizar la batería Cómo utilizar el visorReproducción de una cinta Grabación de una imagen fija en tarjeta PhotoshotReproducción de una tarjeta de memoria Index