Others
Although the Camcorder is correctly connected to a TV, playback images cannot be seen.
•Have you selected video input on the TV? Please read the operating instructions of your TV and select the channel that matches the input terminals used for the connection.
Playback picture is not clear.
•Are the heads of the Camcorder dirty? If the heads are dirty, playback image cannot be clear. Clean the heads by using the head cleaner for digital video. (pp. 57~58)
•If the terminal for the AV cable is soiled, noises may appear on the screen. Wipe the soil off the terminal with a soft cloth, and then connect the cable to the AV terminal.
•Is a picture containing a copyright protection signal (copy guard) being recorded? When a protected picture is played back by the Camcorder,
Card
Recorded pictures are not clear.
•Have you set [ BASIC] >> [ PICT. QUALITY] >> [ (Normal)]? If recording is done with it set to [ (Normal)], pictures with fine details may include a
A file recorded on a card cannot be deleted.
•Is the file locked? Locked files cannot be deleted. (p. 35)
•For the SD Memory Card, if its write protect switch is set to [LOCK], then deletion is disabled. (p. 55)
Photoshot playback images do not look normal.
•The picture may be damaged. In order to prevent the loss of image data, backing up on a cassette or a personal computer is recommended.
Even if a card is formatted, it cannot be used.
•Either the Camcorder or the card may be damaged. Please consult a dealer.
During playback, [UNPLAYABLE CARD] is displayed.
•The image was either recorded in a different format, or data is damaged.
Others
The indication disappears, the screen is frozen, or no operation can be performed.
•Turn off the power to the Camcorder. If the power cannot be turned off, press the [RESET] button (p. 62), or detach the battery or AC adaptor and then reattach it. After that, turn on the power again. If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased the Camcorder from.
[PUSH THE RESET SWITCH] is displayed.
•An irregularity in the Camcorder has been automatically detected. Remove the cassette or the card for data protection and then press the [RESET] Button with the protection on the Lens Cap. The Camcorder will be activated.
•An irregularity in the Camcorder has been automatically detected. Remove the cassette or the card for data protection and then press the [RESET] Button. The Camcorder will be activated.
•If you do not press the [RESET] Button, the power to the Camcorder is turned off automatically about 1 minute later.
•Even after you press the [RESET] button, the indication may still appear repeatedly. If so, the Camcorder needs repair. Detach the power connected, and consult the dealer who you purchased the Camcorder from. Do not attempt to repair the appliance by yourself.
Even if connected by the USB cable, the Camcorder is not recognized by the PC.
•Is the USB driver installed? For information, refer to pages 39~40.
When the USB cable is disconnected, an error message will appear on PC.
•To disconnect the USB cable safely,
The Camcorder malfunctions on editing or dubbing from digital video equipment.
•If a tape is recorded in multiple modes such as SP and LP (recording mode), 12bit and 16bit (sound recording mode), recorded and unrecorded parts, the Camcorder may malfunction at a point where the mode switches. When you edit, do not record in multiple modes.
The Warning/Alarm indication [ ] appears when the Camcorder is operated in the Web Camera mode.
•Did you press the [MENU] Button or the Recording Start/Stop Button? You cannot use the menu or record onto the Tape/Card in the Web Camera mode.
•Did you attempt to play a tape without inserting it? Insert a tape.
•Did you attempt to play a tape with copyright protection (copy guard)? Pictures of the tape with copyright protection (copy guard) cannot be displayed on the PC. (The audio of the tape can be played.)
•Is the Video Stream Driver installed? (pp. 42~43)
61