Audio dubbing

Panasonic NV-GS250GN operating instructions Audio dubbing, To cancel the standby for recording

Edit mode

ªTo cancel the standby for recording

When the camera is standby for recording, move the joystick down and select the [∫] icon.

≥Do not plug or unplug the DV cable during dubbing, or the dubbing may not be completed properly.

≥If a picture (bilingual video, etc.) containing main sound and sub sound has been dubbed, select the desired sound by [SETUP] >> [AUDIO OUT]

on playback.

≥Even if you use a device equipped with DV terminals such as IEEE1394, you may not be able to perform digital dubbing in some cases. For more information, see the instructions for equipment connected.

≥Regardless of the menu settings on the recorder, digital dubbing is carried out in the same mode as the [AUDIO REC] mode of the playback tape.

≥The images on the recorder monitor may be disturbed, but it does not affect the recorded images.

≥If a picture containing a copyright protection signal (copy guard) is recorded by the movie camera, the picture is distorted by mosaic-like

patterns at playback.

≥Disconnect the USB cable since input signals from the external input terminal cannot be recorded while it is connected with the USB cable.

≥When wide images are input, the display such as the menu screen or the operation icon is expanded horizontally.

≥While pictures are input from the DV terminal, the operation icon blinks on instead of appearing from the side of the screen when you press the center of the joy stick.

You can add music or narration to the recorded cassette.

≥Set to Tape Playback Mode. (If you perform external input, set [BASIC] >> [AV JACK] >> [IN/OUT], and connect an input device.)

Audio dubbing using the microphone terminal

1Insert a free style remote control or an external microphone securely into the [REMOTE/MIC] terminal as far as it will go.

REMOTE/MIC

2Set [ADVANCE] >> [A.DUB INPUT] >> [MIC]. Audio dubbing (external input) using other equipment (audio equipment, etc.)

1Insert the AV cable (supplied) securely into the AV terminal as far as it will go.

AV/

2Set [ADVANCE] >> [A.DUB INPUT] >> [AV IN].

3Find a scene that you want to add sound to, and press the [;] button on the remote control.

V/REW	PLAY	FF/W	;
			W
STILL ADV	PAUSE	STILL ADV	VOL
STILL ADV	PAUSE	STILL ADV
	STOP

4Press the [A.DUB] button on the remote control to make audio dubbing ready.

	ZOOM	A.DUB ;
	T	A.DUB ;
	T

¥REC A.DUB

V/REW PLAY FF/W

STILL ADV PAUSE STILL ADV

VOL

VQT0N73