Before recording with audio dubbing | Panasonic NV-GS250GN specs

Panasonic NV-GS250GN operating instructions Before recording with audio dubbing, USB cable

Edit mode

5Press the [;] button on the remote control to start audio dubbing.

V/REW	PLAY	FF/W	A.DUB ¥
			W
STILL ADV	PAUSE	STILL ADV	VOL
	STOP

≥When the free style remote control is used, start recording with the [TALK] button pressed.

≥Talk into the microphone. Or start play on the playing device.

6Press the [;] button on the remote control to stop audio dubbing.

V/REW PLAY FF/W

STILL ADV PAUSE STILL ADV

VOL

STOP

≥If a tape has a non-recorded portion when the tape is dubbed, images and sounds may be disturbed when this portion of the tape is played back.

ªBefore recording with audio dubbing

≥Set to Tape Recording Mode.

≥When you want to preserve the original sound taken during recording, set [SETUP] >> [AUDIO REC] >> [12bit] to take pictures. (When set [16bit], the sounds taken during recording are erased after recording with audio dubbing.)

≥Set [BASIC] >> [REC SPEED] >> [SP] to take pictures.

ªTo play back the sound recorded with

audio dubbing

You can switch between the sound recorded with audio dubbing and the original sound.

Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX]. [ST1]: It only plays back the original sound. [ST2]: It only plays back the sound added by

audio dubbing.

[MIX]: It simultaneously plays back the original sound and the sound added with audio dubbing.

ªTo dub audio while listening to a

pre-recorded sound

≥When pausing the audio dubbing, set the [12bit AUDIO] on the [SETUP] Sub-Menu to [ST2] and you can check the pre-recorded sound. When the line input is used, you can dub audio while listening to the pre-recorded sound from the speaker.

Printing pictures by directly connecting to the printer (PictBridge)

To print pictures by directly connecting the movie camera to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.)

≥Insert a card and set to Picture Playback

Mode.

1Connect the movie camera and the printer with the supplied USB cable.

1USB cable

PictBridge

≥The [PictBridge] indication appears on the screen of the movie camera.

(When the printer is being recognized, the [PictBridge] indication blinks.)

≥When no card is inserted in the movie camera, the [PictBridge] indication does not appear. (You cannot print any pictures.)

≥When the movie camera and the printer are not connected properly, the [PictBridge] indication keeps blinking. (It will blink for over approx.

1 minute.) Connect the cable or check the printer.

≥We recommend using the AC adaptor as the power supply.

≥When images are displayed in multi-screen, they cannot be printed.

2Select [SINGLE PRINT] or [DPOF PRINT].

≥If there is no file with a DPOF setting, you cannot select [DPOF PRINT].

≥When you select [DPOF PRINT] for printing, set the number of prints in DPOF setting.

≥When [DPOF PRINT] is selected, print after you determine the paper size.

VQT0N73