Panasonic NV-GS250GN Functions cannot be used simultaneously, Functions Conditions which disable

Page 52

Others

Functions cannot be used simultaneously

Some functions in the movie camera are disabled or cannot be selected due to its specifications. The table below shows examples of functions restricted by conditions.

Functions	Conditions which disable
	the functions

≥Progressive	≥When recording onto a
	tape and a card
	simultaneously
	≥When digital zoom
	(10k or higher) is used
	≥When the shutter speed is
	1/750 or faster in Tape
	Recording Mode
	≥When the gain value is
	increased in Tape
	Recording Mode
	≥When brightness is
	insufficient with the flash
	[ ] in Tape Recording
	Mode
	≥When the colour night
	view function is used
	≥When the portrait mode of
	the scene mode is used in
	Tape Recording Mode
	≥When the wide mode is
	used

≥Digital zoom ≥When the Card Recording

≥Wide mode	mode is used
≥Fade

≥Backlight	≥When the iris/gain is set
compensation	≥When the colour night
	view function is used

≥Soft skin	≥While recording to a tape
≥Tele-macro
≥Recording
check

≥Colour Night	≥While recording to a tape
View	≥When the Card Recording
	mode is used

≥Continuous	≥When [PICTURE SIZE] is
Photoshot	set to other than [640]
	≥When the shutter speed is
	1/12 or slower

≥Flash	≥While recording to a tape
	≥During demo mode
	≥When continuous
	photoshot is used
	≥When the colour night
	view function is used

≥Zoom	≥When the microphone of
microphone	the free style remote
≥Wind noise	control or an external
reduction	microphone is used

≥Scene mode	≥When setting the [AUTO/
	MANUAL/FOCUS] switch
	to [AUTO]
	≥When the colour night
	view function is used

≥Change of	≥When digital zoom
white balance	(10k or higher)
	is used
	≥When the colour night
	view function is used
	≥When the shutter speed is
	1/12 or slower in the Card
	Recording mode
	≥When a menu is
	displayed

≥Adjusting the	≥When the colour night
shutter speed,	view function is used
iris/gain	≥When the scene mode is
	used

≥Variable-speed	≥During repeat playback
search

≥Deleting files	≥When the write protect
	switch on the card is set
	to [LOCK]
	≥When the file is protected

≥Formatting	≥When the write protect
	switch on the card is set
	to [LOCK]

≥Audio dubbing	≥The section of a tape
	recorded in LP mode
	≥The blank section of a
	tape
	≥Sounds sent through the
	DV terminal

52

VQT0N73

Image 52

Contents Operating Instructions Information for your safety Contents Accessories OptionalParts identification and handling CameraViewfinder -8 Fitting the lens cap Tripod receptacleShoulder strap fixture Lens hoodUsing the LCD monitor To restore the strap to the grip beltOne-touch free-style grip belt To use as a hand strapUsing the viewfinder Power supplyFitting the battery Removing the batteryCharging time and recordable time Connect the DC input lead to this productWhen the cassette holder does not Come out When the cassette holder cannot be HousedInserting/removing a cassette Inserting/removing the cassetteCard access lamp Inserting/removing a cardConcerning the card SD Memory CardHow to use the joystick Selecting a modeTurning the camera on Tape recording mode AUTO/MANUAL/FOCUS switch is set to Auto Tape playback modeCard recording mode AUTO/MANUAL/FOCUS switch is set to Auto Tele-macro Soft skin mode Backlight compensationSwitching the language Using the menu screenSetting date and time Adjusting LCD monitor/viewfinderUsing the remote control Remote controlSet Setup LCD AI Dynamic or Normal Changing the picture quality on the LCD monitorInstall a button-type battery Concerning the button-type batterySwitching the microphone Free style remote control with micAbout the clip on the backside About auto mode Recording modeCheck before recording Basic camera holdingRecording on a tape On-screen display in the tape recording modeConcerning the remaining tape time Indication on the screen Check the recording Blank search functionRecording still pictures onto a card Photoshot Stopping blank search midway ThroughOn-screen display in the card recording mode Concerning the focusing areaProgressive Photoshot Select the size of still pictures to be Recorded on a cardZoom in/out function Recording yourselfDigital zoom function To use the zoom microphone functionTo cancel the quick start when Power is OFF Quick startBacklight compensation function Night view functionsSoft skin mode To cancel the colour night view functionTo cancel the soft skin mode To cancel the tele-macro functionFade in/fade out function Using the built-in video flashWind noise reduction function Self-timer recording To cancel the Wide/Cinema function To cancel the image stabilizer functionRecording images for wide-screen TVs Image stabilizer functionContinuous Photoshot Recording in various situations Scene modeTo stop continuous photoshot Midway through To cancel the scene mode function To restore to the automatic AdjustmentRecording in natural colours White balance To set the white balance manuallyManual focus adjustment About the black balance adjustmentAbout flashing of the indication About the white balance sensorManual shutter speed/aperture adjustment To restore to automatic adjustmentCard slow shutter mode Shutter speed rangeTo adjust volume Settings on the audioPlaying back tape Repeat playbackVariable-speed search function Slow-motion playback/ frame-by-frame playbackTo return to normal playback Playing back card Playback on TVTo display the on-screen information On the TV Deleting files recorded on a card To display multiple playback filesAbout the compatibility of still pictures To delete all filesWriting the printing data on a card Dpof setting To complete the settingsFormatting a card Protecting files on a cardSelect Cancel ALL in Step What is DPOF?To set so that all pictures are not Printed Edit mode Recording from a tape onto a cardCopying onto a DVD recorder or a VCR Dubbing ≥The image and sound are reproducedRecording the contents of other equipment Using the DV Cable for Recording Digital Dubbing Analog/digital conversionTo cancel the standby for recording Audio dubbing using the microphone terminalAudio dubbing You can add music or narration to the recorded cassetteBefore recording with audio dubbing To play back the sound recorded with Audio dubbingTo dub audio while listening to a Pre-recorded sound USB cableWhen you stop printing halfway Select the setting for date printingSelect the desired number of prints Select the paper sizeMenu list Tape Recording MenuTape Playback Menu MenuSetup Setup Display -47-REMOTECard Recording Menu Picture Playback MenuMenus related to taking pictures Menus related to playbackDemo Mode Other menusAudio OUT Initial SETIndications Basic indicationsRecording indications Playback indicationsConfirmatory indications Textual indicationsThere are not any recorded files on the card You are attempting to erase protected filesVideo heads are dirty There is no ink. Check the connected printerFunctions Conditions which disable Functions cannot be used simultaneouslyBefore requesting repair Problems and solutions Original sound was erased when audio dubbing was performed Screen has changed suddenlyCassette cannot be inserted Auto focus function does not workPush the Reset Switch is displayed Playback PicturesPlayback picture is not clear Card Recorded pictures are not clearAbout condensation When the lens is fogged About dirty headsAbout the movie camera While carrying the movie camera, do not drop or bump itAbout the AC adaptor About the batteryAbout the cassette About the card Folder structure of the cardLCD monitor/viewfinder Periodical check-upsExplanation of terms Automatic white balanceWhite balance Auto focusSpecifications SpecificationsHttp//panasonic.co.jp/pavc/global/cs This Site is English onlyAC adaptor VQT0N73 S0105Ke0