Panasonic PV-DV953 Using the DV Studio 3.1E-SE, Installation of DV Studio 3.1E-SE

2

3

4

Using the DV STUDIO 3.1E-SE

ªOperating environment

OS:

IBM-PC/AT compatible personal computer with pre-installed;

Microsoft Windows XP Home Edition/Professional

Microsoft Windows Me (Millennium Edition)

Microsoft Windows 98 Second Edition

CPU:

Intel Pentium II/ Celeron 300MHz or later (including compatible CPU)

Graphic display:

High Color (16 bit) or more.

Desktop resolution of 800k600 dots or more.

RAM:

32 MB or more (64 MB or more is recommended) (128 MB or more are required for Windows XP.)

Free hard disk space:

At least 20 MB

Ports:

USB Terminal

Other requirements:

Mouse

≥Operation is not guaranteed on Windows 2000.

≥When 2 or more USB devices are connected to a personal computer, or when devices are connected through USB hubs or by using extension cables, proper operation is not guaranteed.

≥When connected to the keyboard USB terminal, normal function may not be possible.

≥This instruction manual describes only the procedures for installation, connection and start-up. Please read the PDF-based instructions for how to use the DV STUDIO 3.1E-SE.

≥To view the installed operating instructions, Adobe Acrobat Reader 4.0 or later is required. Please install Adobe Acrobat Reader 5.0 from the supplied CD-ROM.

≥Before using for the first time, select [Readme] from [Start]>>[All programs (Programs)]>>[Panasonic]>>[DV STUDIO3], and read any supplementary details or updates.

ªInstallation of DV STUDIO 3.1E-SE

1	1	Insert the supplied CD-ROM into the personal computer’s
		CD-ROM drive.

2Select the software to be installed from [Setup Menu].

3 Click [Next].

≥After reading the displayed contents, please carry out the installation according to instructions.

4After the completion of setup, click on [Finish]

≥Installation will be completed.

≥Sample data is installed concurrently with the DV STUDIO 3.1E-SE software.

	USB	2	ªTo start DV STUDIO 3.1E-SE
			1	Set the Palmcorder to VCR Mode or Camera Mode.
				≥If you wish to capture data from a tape, set the Palmcorder to VCR
			2	Mode and insert the tape.
3				Connect the Palmcorder to the Personal Computer with
			3	auxiliary USB Connection Cable.
				Select [Start] >> [All Programs (Programs)] >> [Panasonic]

>> [DV Studio3]>> [DV Studio3].

≥If a shortcut icon has been created on the desktop during installation, it is also possible to start by double-clicking on the icon.

58