Panasonic PV-DV953 Changing the Counter Display Mode, Displaying Date/Time Indication, L14

ªChanging the Counter Display Mode

By changing [C.DISPLAY] on the [DISPLAY SETUP] Sub-Menu, you can change the Counter Display Mode to Tape Counter Indication (0:00.00), Memory Counter Indication (M0:00.00), and Time Code Indication (0h00m00s00f).

≥You can also press the [COUNTER] Button of the Remote Controller repeatedly to change the Counter Indication.

ªDisplaying Date/Time Indication

To display Date/Time Indication, set the appropriate Date/ Time in [DATE/TIME] on the [DISPLAY SETUP] Sub-Menu. ≥You can also press the [DATE/TIME] Button on the

Remote Controller repeatedly to display or change the Date/Time Indication.

ªChanging the Display Mode

By changing [DISPLAY] on the [DISPLAY SETUP] Sub-Menu, Counter Display Mode changes to All Function Display, Partial Display, and Minimum Display.

~~~~~~~~~~~~~~~~~~~

Warning/Alarm Indications

If any one of the following indications lights up or flashes, please check the condition of the Palmcorder.

EJECT TAPE: After the [DEW DETECTED] Indication appears, eject the Cassette.

YCHECK REC TAB : The erasure prevention tab on the inserted Cassette is open (that is, set to [SAVE]).

When you are attempting to do audio dubbing on the unrecorded (blank) portion of the tape, or you are attempting to do dubbing on the Cassette whose tab is set at [SAVE]. (l41, 52)

YTAPE NOT INSERTED:

No Cassette is inserted. (l16)

XLOW BATTERY MODE:

	The Battery is low. Recharge it.
	(l14)
0:	The internal lithium battery is low.
	(l23)

2END/TAPE END: The tape ended during recording.

REMOTE/

CHECK REMOTE MODE:

Wrong Remote Controller Mode has been selected. (l13)

CANNOT REC LP-MODE:

Because the original recording was done in LP Mode, audio dubbing cannot be performed. (l41)

INCOMPATIBLE DATA:This Cassette is incompatible or contains copy-guard.

Because the medium is protected by a copy guard, images cannot be recorded correctly.

°:If this Indication appears, return the LCD Monitor to the original position in order to check the specific content of the Warning/Alarm Indication.

AV INPUT RECORDING:

	When you are attempting to record
	on the Memory Card during dubbing
	(l52) on the Cassette.
NO CARD:	There is no Memory Card inserted.
PLEASE WAIT:	When reading of the Memory Card
	(playback, format, when using the
	Multi-Picture Function). (l45, 50)
CARD ERROR:	The Memory Card is not compatible
	with the Palmcorder.
CHECK SELECT SWITCH:
	You are attempting to record a tape
	in VCR Mode, with the combination
	of modes set with the [TAPE/CARD/
	CARD MODE] Selector, this
	Indication appears. Pressing the
	Recording Start/Stop Button with
	[PICTURE] in Camera Mode.
	Pressing the PhotoShot Button with
	[MPEG4] or [VOICE] in Camera
	Mode. Pressing the Recording Start/
	Stop Button with [TAPE] and
	[PICTURE] in Card Playback Mode.
	Pressing the PhotoShot Button with
	[PICTURE] in Card Playback Mode.
FILE LOCKED:	When you are attempting to delete a
	locked picture. The locked picture
	cannot be deleted.
WRITE PROTECTED: When you are attempting to write
	the data on an SD Memory Card
	whose write protection switch is set
	at [LOCK].
NO PICTURE:	There are no pictures in the Memory
	Card.
NO MPEG4 DATA:	There are no moving pictures in the
	Memory Card.
NO VOICE DATA:	There is no voice data in the
	Memory Card.
NO TITLE:	There are no titles in the Memory
	Card.
NO SPACE LEFT:	Card does not have sufficient
	memory remaining.
	Select Card Mode and delete
	unnecessary files.
t:	You are attempting to play back data
	which is not compatible with this
	Palmcorder. (l45)
DEW DETECTED:	Condensation has occurred. (l74)

:NEED HEAD CLEANING:

The video heads are dirty. (l74)

PUSH THE RESET SWITCH:

Irregular mechanism is detected. Press the [RESET] Button.

This may solve the problem. You are attempting to record to a Memory Card formatted with other equipment (like a Personal Computer). Format the Memory Card with this equipment.

NEEDS TO BE SERVICED:

Disconnect the power supply and request service.

CONNECT USB CABLE:

The [WEB CAMERA] Button is pressed with USB Cable unconnected. Connect the USB Cable to the Palmcorder and the Personal Computer.

66