Panasonic PV-DV953 Condensation, Digital Video Head Cleaner, Optimal Use of the Battery

Page 74

ªCondensation

If excessive moisture condenses in the unit,

[DEW DETECTED] Indication will flash, and the Palmcorder will automatically turn off after about 1 minute.

If this happens, follow the steps below:

1Take out the Cassette.

None of the other functions operate. Depending on the amount of condensation, removing the Cassette may become difficult. If this happens, wait for 2 to 3 hours before taking the Cassette out.

2Open the Cassette Compartment and wait for 2 to 3 hours.

The number of hours you should wait depends on the amount of condensation and ambient temperature.

32 to 3 hours later, turn on the Palmcorder and check to see if the [DEW DETECTED] Indication is displayed.

Even if the [DEW DETECTED] Indication is not displayed, as a precaution, please wait for another hour before using the Palmcorder.

Watch for Condensation Even Before the [DEW DETECTED] Indication Is Displayed.

Because condensation takes place gradually, the

[DEW DETECTED] Indication may not be displayed during the first 10 to 15 minutes of condensation formation inside the Palmcorder.

In extremely cold places, condensation may freeze and form frost. In this case, the frost melts first, thus forming condensation, and then it takes another 2 to 3 hours to

eliminate the condensation.

When the Lens Is Fogged:

Set the [OFF/ON/MODE] Switch to [OFF] and leave the Palmcorder in this condition for about 1 hour. When the lens temperature becomes close to the ambient temperature, the fog disappears naturally.

ªDigital Video Head Cleaner

If the heads (the parts that make contact with tape) are dirty, mosaic-like noise patterns may appear on the playback image, or the screen as a whole becomes black. If the heads are extremely dirty, recording performance deteriorates, and, in the worst case, the Palmcorder cannot record at all.

Causes of Digital Video Heads Becoming Dirty Large quantity of dust in the air High-temperature and high-humidity environment Damaged tape

Long operating hours

Using Mini-DV Format Digital Video Head Cleaner (AY-DVMCLA)

1Insert the Head Cleaner into the Palmcorder in the same manner as a Video Cassette.

2Press the [1] Button, and 20 seconds later, Press the [] Button. (Do not rewind the tape.)

3Take out the head cleaner. Insert a Video Cassette and start recording. Then, play the tape back to check the recorded image.

4If the image is still not clear, repeat Steps 1 to 3. (Do not use the Head Cleaner 3 times or more consecutively.)

Notes:

Do not rewind every time you use the Head Cleaner. Rewind only when the tape reaches the end, and then use it again from the beginning in the same manner as before.

If the heads become dirty soon after cleaning, the Mini DV may be damaged. In this case, immediately stop using that

Cassette.

Do not clean the heads excessively. (Excessive cleaning may cause excessive wear of the heads. If the heads are worn, images cannot be played back even after the heads are cleaned.)

If the dirty heads cannot be cleaned with the head cleaner,

the Palmcorder needs to be cleaned at a service center. Please consult a distributor or Panasonic Servicenter.

Video head cleaners can be purchased from service centers.

Head cleaning due to dirty heads is not considered a malfunction of the product. It is not covered by the warranty.

Periodic Check-up

To maintain the highest image quality, we recommend replacement of worn parts, such as heads, etc., after approximately 1000 hours of use. (This, however, depends on operating conditions, such as temperature, humidity, dust, etc.)

ªOptimal Use of the Battery

Battery Characteristics

This Battery is a rechargeable lithium ion battery. Its ability to generate power is based upon the chemical reaction that takes place inside it. This reaction is affected by the surrounding temperature and humidity, and, if the temperature is too high or too low, the operating time of the Battery becomes shorter. If the Battery is used in an extremely cold environment, the Battery may operate only for about 5 minutes. If the Battery becomes extremely hot, a protective function may operate, and the Battery may even become unusable for awhile.

Be Sure to Detach the Battery After Use

Be sure to detach the Battery from the Palmcorder. (If it is left attached to the Palmcorder, a minute amount of current is consumed even when the Palmcorder power is off.) If the Battery is left attached to the Palmcorder for a long time, over discharge takes place. The Battery may become unusable after it is charged.

Disposing of an unusable Battery The Battery has a limited life.

Do not throw the Battery into fire because it may cause an explosion.

Always Keep the Terminals of the Battery Clean

Prevent the terminals from getting clogged with dirt, dust, or other substances.

If you drop the Battery accidentally, check to see if the Battery body and terminals are damaged.

Attaching a damaged Battery to the Palmcorder or AC Adaptor may damage the Palmcorder or AC Adaptor.

74

Image 74
Contents Operating Instructions Thank you for choosing Panasonic Above markings are located on the appliance bottom coverImportant Safeguards Precautions End User License Agreement for USB Driver and DV Studio Before opening the CD-ROM package, please read the followingAudio Decoder End User License Agreement Limited USE Software LicenseContents AC Adaptor, DC Cable and AC Cable l14 Standard AccessoriesBattery Pack l14 USB Cable l53To View the Playback Picture Charge the Battery. lQuick Guide Start recording. lControls and Components Remote Control Sensor l13 Reset Button Reset l80MagicWire Remote Control Jack Remote l12 SpeakerRemote Controller MagicWire Remote ControlWhile pressing the Stopper 1, pull out the Battery Holder Inserting the Button-type Battery˚ 15˚ 15˚ 15˚ Using the Remote Controller Selecting Remote Controller ModesUsing the Battery Power SupplyUsing the AC Adaptor Attach the Battery to AC Adaptor and charge itªAttach the Lens Cap Adjust the Easy-Grip StrapLens Cap and Easy-Grip Strap 1ªTo Use as a Free Style Easy-Grip StrapAccidental Erasure Prevention Attaching the Shoulder StrapInserting a Cassette If the Cassette Holder Does Not Go BackTurning on/off the Palmcorder and Selecting Modes Using the ViewfinderUsing the LCD Monitor Using the Menu Screen File Selection in the Card Playback ModeList of Menus Demo Mode Sub-Menu Recording Setup Sub-MenuDisplay Setup Sub-Menu Other Functions Sub-MenuPlayback Functions Sub-Menu AV IN/OUT Setup Sub-MenuVCR Mode Main-Menu VCR Functions Camera data will not be recorded in the following casesDelete Card File Sub-Menu Card Playback Mode Main-Menu Card FunctionsShort-Cut Menus of the Card Playback Mode a Card Editing Sub-MenuLP Mode Setting Date and TimeInternal Lithium Battery Recharge Audio Recording ModeTo View the recorded scene while the Recording is RecordingTo Check the Recording To Finish the RecordingPhotoShot Recording on the DV Cassette Digital Zoom Function Set Camera Functions Camera Setup D.ZOOM 25t or 700tZoom In/Out Functions Times Tele Jump Zoom FunctionHold down the Fade Button while recording Optical Image Stabilizer FunctionFade In/Out Functions FadeMagicPix Function Cinema Function and Wide FunctionBacklight Compensation Function Cinema FunctionRecording with a Fixed Brightness AE Lock Function Wind Noise Reduction FunctionRecording in Special Situations Program AE Manual Focus Adjustment Manual Shutter Speed AdjustmentManual Iris Adjustment F Number To Resume Automatic AdjustmentAbout White Balance Sensor Adjusting White Balance ManuallyRecording in Natural Colors White Balance Zebra Pattern Picture AdjustmentAdvanced Functions Microphone Sensitivity LevelUsing the Auto Pop-up Flash Wipe Mode and Mix Mode Digital Effect FunctionsSet MULTI-PICTURES Scan Mode Strobe or Manual Multi-Picture ModePicture-in-Picture Mode To Display the Multi-Pictures againPlaying Back Finding a Scene You Want to Play BackFinding the End of a Recording Blank Search Function Slow Motion PlaybackStill Playback/Still Advance Playback Jog PlaybackScene Index Search Index Search FunctionsªPhotoShot Index Search Press the 9 Button or the Button on the RemotePlayback Digital Effect Functions Canceling the Playback Zoom FunctionPlayback Zoom Function Suspending Playback Digital Effect TemporarilyPlaying Back with Multi-Picture Mode Press the Index Button or 9 4 on the Remote controllerPlaying Back on Your TV Audio DubbingUsing a Memory Card Recording on the Memory CardTo Stop the Transfer of Images After setting the Palmcorder to the VCR Mode l36Automatically copying still pictures recorded on a Cassette Press the Button ≥For other notes, seeMaximum recording time on the supplied Card 16 MB Recording Moving Pictures MPEG4Recording Voice Voice Recording Function Maximum recording time on the supplied Card 16MBPlaying back Still Pictures Set the Palmcorder to Card Playback ModePlaying Back Files from the Memory Card Playing back Moving Pictures MPEG4To Select a Desired File and Play it Back Using File Search ModeCopying Pictures from a Memory Card to a Cassette Slide Show Creating a Title Inserting a TitleDeleting the Files Recorded on a Memory Card Dpof Setting Formatting a Memory CardCopying an S-VHS or VHS Cassette to your DV Cassette Stopping Dubbing Using your Palmcorder with Digital Video Equipment DubbingAnalog-Digital Conversion ≥Recording startsSoftware Installation Windows Using the Software with a ComputerUsing USB Driver Select the software to be installed from Setup MenuClick OK when the Restarting Windows Dialogue appears Installing USB DriverFinish installation by following the on-screen instructions For Windows 98SE/Me UsersFor Windows XP/2000 Users Connecting Computer and PalmcorderAfter the completion of setting, click on Finish Use auxiliary USB Connection Cable to connectStart the NetMeeting Using as a Web CameraªOperating environment Setting up the NetMeeting ªTo start DV Studio 3.1E-SE Using the DV Studio 3.1E-SEInstallation of DV Studio 3.1E-SE Install it by following the instructions on the screen Using the G.726 Audio DecoderInstalling the G.726 Audio Decoder Click Finish when the Setup Complete Dialog appearsUsing the ArcSoft Software Software Installation MacintoshTo start software in the ArcSoft Software Suite Installation of ArcSoft Software Suite≥Installation begins For Information on ArcSoft SoftwareDouble click the icon in task tray If you no longer need software or driver UninstallTo disconnect USB cable safely Windows XP/2000SD Memory Card About the SD Memory Card MultiMediaCardAbout the compatibility of the card files MultiMediaCardIndications ≥Number set Dpof 00 l50 Dpof setting & Slide Show Recording ModeWhite Balance Mode Voice cyan l42 ≥File number No.000 l45 ≥Lock setting l49Battery is low. Recharge it Changing the Counter Display ModeChanging the Display Mode Displaying Date/Time IndicationZoom In/Out Functions l26 Alarm Sounds l20Progressive PhotoShotTM Function l25 Cinema Function and Wide Function l28MagicPix Function l28 Manual Shutter Speed Adjustment l30Manual Iris Adjustment l30 Program AE l29Listening to Playback Sound Through Headphones Using the Auto Pop-up Flash l33Digital Effect Functions Camera Mode Playback Zoom Functions l39 Multi-Picture Mode VCR Mode l40Selecting the Sound during Playback Playback Digital Effect Functions l39 Recording Moving Pictures MPEG4 l44 Recording to a Card from other equipment Card PhotoShot l42 Voice Voice Recording Function l44Card Playback l45 Voice Power Save l20Using a Card in a Personal Computer Copying Pictures from a Memory Card to a Cassette l46About the AC Adaptor Tips for using your PalmcorderAfter Use ≥If you use the Palmcorder near a TV, images or soundsCondensation Digital Video Head CleanerOptimal Use of the Battery Take out the CassetteLCD Monitor/Viewfinder/Lens Hood Explanation of Terms Specifications Digital PalmcorderPalmcorder Accessory System Accessory# DescriptionPalmcorder Accessory Order Form For USA Customers VisaBefore Requesting Service Problems and Solutions Problems SolutionsMosaic-like noise patterns appear on images during Headphones of the PalmcorderIs pressed Cue, Review or Slow Motion PlaybackRequest for Service Notice Parts Labor Service Contact Number Limited Warranty For USA CustomersLimited Warranty Coverage Carry-In, Mail-in or In-Home ServicePanasonic Services Company 1705 N. Randall Road Elgin, IL Customer Services DirectoryCentralized Factory Servicenter Ambler Drive, Mississauga, Ontario L4W 2T3 Warranty For Canadian CustomersPanasonic Canada Inc Camcorder Product One 1 year, parts and labourIndex Para grabar Spanish Quick Use Guide/Guía española para el uso rápidoPara iniciar Para comprobar lo que ha sido grabadoPara reproducir la imagen en la tarjeta de memoria Para introducir una tarjeta de memoriaPara grabar en una tarjeta de memoria Ajuste la videocámara según el modo de playback de tarjetaPage Page Page Panasonic Canada Inc LSQT0619A F0103Nm0 600 a