Editing Features
Audio Dubbing using the External
The original sound can be replaced with new sound using the
External Microphone Jack
3JOG KEY
3MENU
1POWER
2PLAY
2PAUSE
3A.DUB
Before you begin
•Connect the external Microphone (if used)
•Turn on the Palmcorder.
•Insert a
The
| The original sound is recorded | |
12 bit | on ST (Stereo) 1, and the new | |
| sound will be recorded on ST | |
| (Stereo) 2. | |
16 bit | The original sound is replaced | |
with the new sound. | ||
|
•Select 12 bit if you do not want the original sound to be completely replaced during an audio dub.
•If you dub over a tape which has both
12 bit and 16 bit audio recordings on it, keep in mind that the original 16 bit audio portion will be completely replaced.
1 Set POWER to VCR.
•With the Remote Control, you can set the Palmcorder to stop automatically at a specified point on the tape. See
2 Press (PLAY). Then press
(PAUSE) where you want dubbing to begin.
When using the Palmcorder only
3 Press MENU to display the VCR mode menu screen.
Rotate JOG KEY to select REC MODE , then press JOG KEY to display the VCR REC MODE menu screen.
Rotate JOG KEY to select AUDIO- DUB , and then press JOG KEY to select ON.
•The Palmcorder will go to Stand By mode, and “A.DUB” flashes in the EVF or the LCD monitor. Go to step 4.
When using the Remote Control only
3 Press A.DUB on the Remote Control.
•The Palmcorder will go to Stand By mode, and “A.DUB” flashes in the EVF or the LCD monitor. Go to step 4.
44 |
|
Forassistance, pleasecall: |