Palmcorder USB Device Driver/SD Drive
For Windows 2000 users
3 Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
•“CONNECT WITH PC” appears in the EVF or the LCD monitor.
•The “Found New Hardware” screen of Windows is displayed.
•When the Palmcorder and PC (with Windows 2000) are connected via USB, a message, such as the one below, is displayed.
The following message is displayed. Even so, functionality confirmation has been performed at our manufacturer.
Click [Yes] and proceed.
Note
• For extended use, the AC Adaptor should be used as a power source.
For Windows 98SE/Me users
3 Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
• “CONNECT WITH PC” appears in the EVF or the LCD monitor.
Note
• For extended use, the AC Adaptor should be used as a power source.
76 |
|
Forassistance, pleasecall: | |
|
|