Playback Mode
Playback Mode
Playing Back a Tape
The recorded scene can be played back immediately after the recording.
1Set the [OFF/ON] Switch (46) to [ON].
≥The [POWER] Lamp (47) lights up.
ON
OFF
(46)
POWER
(47)
2Set the Mode Dial (43) to Tape Playback
Mode.
| S |
(43) | D |
PC |
3Press the [6] Button (16) to rewind the tape.
ªAdjusting the Sound Volume
To adjust the volume, push the [W/T] Lever (40) to display the [VOLUME] Indication. Push the [W/T] Lever towards [T] to increase the volume or push the [W/T] Lever towards [W] to decrease the volume. The [VOLUME] Indication goes off after the adjustment is finished.
VOL/JOG
W T
(40)
To adjust the volume with the Remote Controller, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] Indication goes off after the adjustment is finished.
≥The sound volume cannot be adjusted using the Remote Controller in Playback Zoom Mode.
(16)
STILL
s 
ENTER 
i
FADE
≥For other notes concerning this item, see
≥Rewind the tape to the point where you want to start playback.
≥When the tape reaches the beginning, rewinding stops automatically.
4Press the [1] Button (14) to start playback.
≥The [!] Indication appears.
(14)
STILL
s 
ENTER 
i
FADE
≥If a cassette recorded with a copyright protection signal is played back, the picture is distorted by
To Stop Playback
Press the [∫] Button (15).
STILL
(15) 
s 
ENTER 
i
FADE
Finding a Scene You Want to Play Back
ªCue/Review Playback
STILL
s 
ENTER 
i
FADE
(16)(13)
If the [5] Button (13) or [6] Button (16) is pressed during Playback, it turns to Cue Playback
Aor Review Playback B.
A |
| B |
|
|
|
≥If the Button is held continuously, it turns to Cue Playback or Review Playback until you release it.