Panasonic PV-GS55 To disconnect USB cable safely, To start software in the ArcSoft Software Suite

Page 57

With a PC

For Macintosh

1Turn on Computer and start up Macintosh.

2Insert supplied CD-ROM into the CD-ROM drive.

3Double click the icon of a CD-ROM that appears.

4Double click [ArcSoft].

5Double click [PhotoImpression] (or [PhotoBase] or [PanoramaMaker] or [PhotoPrinter]).

6Double click [English] or [French].

7Doubleclick[PhotoImpression Installer](or [PhotoBase Installer] or [PanoramaMaker Installer] or [PhotoPrinterInstaller]).

8Follow the instructions on the computer screen until the installation is complete.

ªTo start software in the ArcSoft

Software Suite

1Select [Start] >> [All Programs (Programs)] >> [ArcSoftSoftware Suite] >>

[Panorama Maker 3] (or [PhotoBase 4] or [PhotoImpression 4] or [PhotoPrinter4]).

For Information on ArcSoft Software:

TEL: 1-510-440-9901

Web Site: www.arcsoft.com

Refer to Help information about application operations and other Error messages.

To disconnect USB cable safely

If USB cable is disconnected while computer is on, error dialog box may appear. In such a case click [OK] and close the dialog box. By following the steps below you can disconnect the cable safely.

1 Double click the

icon in task tray.

≥Hardware disconnect dialog box appears.

2Select[USB Mass Storage Device]andclick [Stop].

3Verify [MatshitaDVC USB Device]is selected and click [OK].

≥You can safely disconnect the cable.

Note on the driver name displayed

The driver name displayed will differ depending on your OS, operating environment and the mode of the Palmcorder.

Windows XP/2000:

(When the Palmcorder is in Tape Recording mode or Tape Playback Mode:)

[Panasonic DVC USB-SERIAL Driver for Win XX (COM X)] (The numeral designation after

“Win XX” will differ depending on the OS. The numeral after “COM” will differ depending on the operating environment of your personal computer.)

(When the Palmcorder is in PC Mode:) [USB Mass Storage Device] or [Panasonic DV DISK Port Driver]

Windows Me:

(When the Palmcorder is in PC Mode:) [USB Disk]

≥Some OS, such as Windows 98SE, may not show the icon indicating that you may safely disconnect in task tray. (OS may be set not to show) Make sure Palmcorder’s Card Access Lamp is off and disconnect the cable. Also, with Windows Me, the icon will not be displayed when in Tape Recording Mode or Tape Playback Mode.

CAUTION:

If you disconnect the USB Cable while the Card Access Lamp is on, it may damage the Card data.

-57-

Page 56 Page 58
Image 57
Page 56 Page 58
Contents Operating Instructions Thank you for choosing Panasonic AC Adaptor≥The rating plate is on the underside of the AC Adaptor PV-GS55 Important Safety Instructions Precautions Article 8 Termination of License Before opening the CD-ROM package, please read the followingAudio Decoder End User License Agreement Contents Palmcorder Accessory Order Form Initializing the Modes Before Requesting Service ProblemsLimited Warranty For USA Customers OthersInserting a Cassette Quick GuideInserting a Card Recording on a TapeRecording a Moving Picture on a Card Playing Back a TapePlaying Back a Card Controls and Components Standard AccessoriesPalmcorder AC Adaptor, DC Cable and AC Cable≥Connect this to the digital video equipment DV Terminal DVViewfinder -19 ≥Used for mounting the Palmcorder on an optional tripodMagic Wire Remote Control with Narration Mic Remote ControllerPhotoshot Button Photo Shot Microphone Switch Button Talk ≥Zoom speed changes in 2 stagesRemote Controller Inserting a Button-type BatteryUsing the Remote Controller Using the AC Adaptor Power SupplyUsing the Battery Disconnecting the Power SourceAttaching the Lens Cap One-touch Free Style Grip BeltAttaching the Shoulder Strap To Use as a Grip BeltCard Access Lamp Using a Memory CardInserting a Cassette Accidental Erasure PreventionUsing the Viewfinder/LCD Monitor Turning on the PalmcorderSelecting Modes Adjusting Brightness and Color Level Using the Menu ScreenFile Selection in the Picture/MPEG4 Playback Mode List of MenusTape Recording Menu Card Recording Menu Tape Playback Menu12bit Audio AV IN/OUTMPEG4 Playback Mode Picture Playback MenuCard Format Formatting a Card -44-3 Digital Internal Lithium Battery Recharge Setting Date and TimeLP Mode Audio Recording ModeRecording on a Tape About RecordingRecording Lamp To Check the RecordingFinding the End of Recording Recording a Still Picture on a Card PhotoshotTo Add a Sound while Recording Digital Still PictureRapidFire Consecutive Photoshot Recording a Moving Picture on a Card MPEG4Recording Yourself Selecting the Quality of MPEG4 Recording imagesQuick Start Self-timer RecordingZoom In/Out Functions To Take Close-up Shots of Small SubjectsDigital Zoom Function Image Stabilizer FunctionTo Use the Zoom Microphone Function Fade In/Out Functions Backlight Compensation FunctionMagicPix Functions Soft Skin Function Wind Noise Reduction FunctionCinema Function Recording in Natural Colors Recording in Special SituationsAbout White Balance Sensor Adjusting White Balance ManuallyManual Shutter Speed Adjustment Manual Focus AdjustmentManual Iris Adjustment Digital Effect Functions Multi-Picture ModeWipe Mode and Mix Mode Picture-in-Picture ModeDeleting All the Captured Multi-Pictures To Display the Multi-Pictures AgainPlaying Back a Tape Adjusting the Sound VolumeFinding a Scene You Want to Play Back Cue/Review PlaybackStill Playback/Still Advance Playback Slow Motion PlaybackVariable Speed Search Function Playback with Zoom LeverPlayback Zoom Function Index Search FunctionsPhotoshot Index Search Scene Index SearchPlaying Back a Card Playback Digital Effect FunctionsSlide Show When you select MPEG4 Playback Mode at StepTo Select a Desired File and Playing Back To Pause the Slide ShowAdding a Title Creating a TitleProtecting the Files on a Card Writing Printing Data on a CardDeleting the Files Recorded on a CardEnlarging a Movie Picture Size Formatting a CardTo Select and Delete All Files To Resume Normal Moving Picture SizePress the OSD Button 55 on the Remote Controller Playing Back on Your TVTo Make the Indications Appear on the TV Screen Recording from a Tape onto a Card Recording Pictures from a Card onto a TapeAudio Dubbing Copying on an S-VHS or a VHS Cassette To Cancel Audio DubbingTo Play Back the Sound Recorded by 12bit Audio Dubbing To Dub Audio While Listening to a Pre-recorded SoundUsing the DV Cable for Recording Recording the Contents of Other EquipmentUsing USB Driver Using the Software with a ComputerSoftware Installation Windows Installing USB DriverFor Using Built-in SD Drive Connecting Computer PalmcorderClick OK when the Restarting Windows Dialogue appears For Windows 2000 UsersUsing as a Web Camera Installing WebCam DriverOperating environment ≥It enters WEB Camera Mode Setting up the Windows MessengerFor Windows 98SE/Me Users Start the Windows Messenger or MSN MessengerSetting up the MSN Messenger Using the DV Studio 3.1E-SEClick Sign Type in your Sign-in name and password Graphic display To start DV Studio 3.1E-SE Using the G.726 Audio Decoder Instructions DV Studio3Using the ArcSoft Software After the completion of setup, click on Finish Installation of ArcSoft Software SuiteFor Windows Other requirementsTo start software in the ArcSoft Software Suite To disconnect USB cable safely≥When Mode Dial 43 is turned to change modes If you no longer need software or driver UninstallAbout the compatibility of the card Files About the SD Memory Card and MultiMediaCardMultiMediaCard Files recorded on a SD Memory Card or MultiMediaCardFiles in which Dpof Data has Jpeg formatBeen set to the image are in this FolderIndications To Change the Display Mode To Change the Counter Display ModeWhen using Tape Recording Mode Initializing the ModesInserting/Removing the Cassette Concerning the Power SupplyRecording Check Alarm SoundsRecording on a Card Quick StartZoom In/Out Functions Self-timer RecordingTele-Macro Function Zoom Microphone FunctionManual Iris Adjustment Manual Shutter Speed AdjustmentProgram AE White BalanceIndex Search Functions Playing BackPlayback Zoom Function Playback Digital Effect FunctionsSlide Show Lock SettingCreating a Title Adding a TitleRecording the Contents of Other Equipment Using the DV Cable for Recording Digital DubbingAfter Use Condensation About AC AdaptorVideo Head Clogging and Care Optimal Use of the BatteryUp the charged capacity LCD Monitor/Viewfinder/Lens HoodCassette LCD MonitorBefore Requesting Service Problems and Solutions Explanation of Terms Auto Focus AdjustmentDigital Video System FocusMemory Stop Function Time CodeUSB SpecificationsPicture Fine Normal Economy Quality 8MB Accessory# Description Palmcorder Accessory SystemAM-5 PM M-F, 6 AM-1030 AM SAT, Pacific Time Palmcorder Accessory Order Form For USA CustomersRequest for Service Notice USA Only Request for Service NoticePanasonic/Quasar Video Products Limited Warranty For USA CustomersAccessory Purchases Customer Services DirectoryCentralized Factory Servicenter Npcparts@panasonic.comAmbler Drive, Mississauga, Ontario L4W 2T3 Warranty For Canadian Customers Panasonic Canada IncCamcorder Product One 1 year, parts and labour Fax 604 278-5627 403 274-5493 905 238-2418RapidFire Consecutive Photoshot Recording Check IndexViewfinder Colocación del cassette Spanish Quick Use Guide Guía española para el uso rápidoInserción de la tarjeta Grabación en una cintaGrabación de una imagen en Movimiento en una tarjeta MPEG4 Grabación de una imagen fija en una Tarjeta PhotoshotReproducción de la tarjeta Reproducción de una cintaPanasonic Canada Inc
Top Page Image Contents