Panasonic PV-GS19, PV-GS35, PV-GS31 operating instructions „ About AC Adaptor, „ Condensation

Page 64

Others

Do not use this Camcorder for surveillance purposes or other business use.

•If you use the Camcorder for a long period of time, the internal temperature increases and, consequently, this may cause malfunction.

•This Camcorder is not intended for business use.

When you use your Camcorder on a beach or similar place, do not let sand or fine dust get into the Camcorder.

•Sand or dust may damage the Camcorder or Cassette. (Care should be taken when inserting and removing the Cassette.)

Do not spray insecticides or volatile chemicals onto the Camcorder.

•If the Camcorder is sprayed with such chemicals, the camera body may be deformed and the surface finish may peel off.

•Do not keep rubber or plastic products in contact with the Camcorder for a long period of time.

Do not use benzine, thinner or alcohol for cleaning the Camcorder.

•The Camcorder body may be deformed and the surface finish may peel off.

•Before cleaning, detach the Battery or pull out the AC Cable from the AC Jack.

•Wipe the Camcorder with a soft dry cloth. To remove stubborn stains, wipe with a cloth that is soaked in a detergent diluted with water and afterwards finish wiping with a dry cloth.

•For storing or transporting the Camcorder, place it in a bag or case lined with soft pads so as to prevent the coating on the camera body from being worn.

After use, be sure to take the Cassette out and detach the Battery from the Camcorder or pull out the AC Cable from AC Jack.

•If the Cassette is left in the Camcorder, the tape sags and deteriorates.

•If the Battery is left on the Camcorder for a long time, the voltage drops excessively, and the Battery will not function even after it is recharged.

„About AC Adaptor

•If the temperature of the Battery is extremely high or extremely low, the [CHARGE] Lamp may continue flashing, and the Battery may not be charged. After the temperature of the Battery has decreased or increased sufficiently, charging starts automatically. If the [CHARGE] Lamp continues to flash even after the Battery temperature has decreased or increased sufficiently, the Battery or AC Adaptor may be faulty. In this case, please contact a dealer.

•If the Battery is warm, charging takes a longer time than normal.

•If you use the AC Adaptor near a radio, radio reception may be disturbed. Keep the AC Adaptor 3 feet (1 meter) or more away from radio.

•When using the AC Adaptor, it may generate whirring sounds. However, this is normal.

•After use, be sure to pull out the AC Cable from the AC Jack. (If they are left connected, a minute amount of current is consumed.)

•Always keep the electrodes of the AC Adaptor and Battery clean.

„Condensation

If you turn the Camcorder on when condensation occurs on the head or the tape, Condensation

Indication [ ] (yellow or red) blinks on the Viewfinder or the LCD Monitor and the messages

[ DEW DETECT] or [ EJECT TAPE] (only when the tape is inserted) appear. In this case, follow the procedure below.

When [ ] in yellow:

Dew is slightly adhering to the head or the tape.

When [ ] in red:

Dew has adhered to the head or the tape.

1 Remove the tape if it is inserted.

•It takes about 20 seconds to open the Cassette Holder. This is not a malfunction.

2 Leave the Camcorder with the Cassette Compartment Cover closed to cool or warm it to the ambient temperature.

When [ ] blinks in yellow

•You cannot use the Tape Recording/Playback Mode. Leave the Camcorder for about

30 minutes.

•However, you can use the Card Recording Mode or Picture Playback Mode when the cassette is not inserted.

When [ ] blinks in red

•The Power Indicator Lamp blinks for about

1 minute and then the Camcorder automatically turns off. Leave it for about 2 to 3 hours.

3 Turn the Camcorder on again, set it to the Tape Recording/Playback Mode and then check if the condensation indication disappears.

Especially in cold conditions, dew may be frozen. In this case, it may take more time before the condensation indication disappears.

Watch for Condensation even before the Condensation Indication is displayed.

•The condensation indication may not appear depending on circumstances. When condensation occurs on the lens or the Camcorder, it also may occur on the head and the tape. Do not open the Cassette Compartment Cover.

When the Lens Is Fogged:

Set the [OFF/ON] Switch to [OFF] and leave the Camcorder in this condition for about 1 hour. When the lens temperature becomes close to the ambient temperature, the fog disappears naturally.

64

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

 

Page 63 Page 65
Image 64
Page 63 Page 65
Contents PV-GS31 PV-GS35 Things You Should Know Safety PrecautionsAbove markings are located on the appliance bottom cover FCC Note Telephone Number PANA7262FCC Caution Important Safety Instructions Precautions To Avoid Shock Hazard ... YourPage Battery Pack Differences between modelsYes JackContents Lock Setting Using Camcorder with a PCUninstall Problems and SolutionsUsing the Viewfinder Set the OFF/ON Switch 1 to onPower Lamp 2 lights up Inserting a CardPlaying Back a Tape Recording a Still Picture on Card PhotoshotPlaying Back a Card Standard Accessories Parts Identification and HandlingAC Adaptor, DC Cable and AC Cable p LCD Monitor Open Knob OPENź p LCD Monitor pp„ Remote Control PV-GS35 Only Audio-Video Output Jack AV OUT ppBuilt-in LED Light For PV-GS31/PV-GS35 p Viewfinder ppRemote Control PV-GS35 Only Inserting the Button-type BatteryUsing the Remote Control PV-GS35 Only „ Selecting Remote Control ModesPower Supply How to remove the Sensor tag Charging Time and Available Recording TimeTo Use as a Grip Belt Re-attaching the Lens Cap„ When the Cassette Holder does not come out „ When the Cassette Holder cannot be housedAttaching the Shoulder Strap Inserting a CassetteUsing a Memory Card Optional Turning on the CamcorderEasy to Use Mode Dial How to Use the Joystick ControlUsing the Viewfinder/LCD Monitor Using the LCD Monitor„ Tape Playback Mode „ Picture Playback ModeUsing the Menu Screen Operating with Remote Control PV-GS35 only SetupSelecting Language List of Menus12bit Audio Setting Date and Time Internal Lithium Battery RechargeLP Mode Audio Recording Mode„ On-screen Display in the Tape Recording Mode Recording Simultaneous Motion/Still Record ModeAbout Recording Recording on a TapeRecording a Still Picture on a Card Photoshot RapidFire Consecutive Photoshot Recording Yourself„ To Stop the RapidFire Consecutive Photoshot in Progress Quick Start Self-timer RecordingZoom In/Out Functions Image Stabilizer Function Digital Zoom FunctionFade In/Out Functions „ To Cancel Fading „ To Cancel the MagicPix FunctionBacklight Compensation Function MagicPix FunctionSoft-Skin Mode Recording in Special Situations Scene ModeWind Noise Reduction Function Cinema FunctionAdjusting White Balance Manually „ To Resume Automatic Adjustment„ To Cancel the Scene Mode Recording in Natural Colors White BalanceManual Shutter Speed Adjustment „ Range of Shutter Speed AdjustmentAbout White Balance Sensor Useful for recording fast-moving subjectsManual Focus Adjustment Manual Iris Adjustment F Number„ Range of Iris Adjustment Adjusting the Sound Volume Playing Back a TapeFinding a Scene You Want to Play Back „ To Stop PlaybackSlow Motion Playback PV-GS35 Only Still Playback/Still Advance PlaybackVariable Speed Search Function PV-GS35 Only „ To Resume Normal PlaybackPlaying Back a Memory Card Slide ShowTo Select a Desired File and Playing Back „ To Stop the Slide ShowWriting Printing Data on a Card Dpof Setting Deleting the Files Recorded on a CardTo Select and Delete Files To Select and Delete All FilesProtecting the Files on a Card Lock Setting Formatting a Card„ About the Dpof Set Basic Protect YESPress the OSD Button 42 on the Remote Control. PV-GS35 only Playing Back on Your TV„ To Display the On-screen Information On the TV Press the button again to erase the OSD informationRecording from a Tape onto a Card Audio Dubbing PV-GS35 OnlyUsing the DV Cable for Recording Digital Dubbing „ Connecting with the AV CableCopying onto a DVD Recorder or a VCR Dubbing Image and sound are reproduced„ To Cancel the Standby for Recording PC Connection With DV Interface Cable„ To Stop Dubbing ControlUsing Camcorder with a PC Using the USB Driver„ For Macintosh „ Windows 98SE UsersConnecting the Personal Computer Camcorder Using Built-in SD DriveTo disconnect USB cable safely Disk 1 For Windows 98SE/Me/2000Windows XP/2000 Using as a Web CameraWindows Me Installing the Video Stream Driver Communication SpeedNecessary software Other requirements to send/receive audioFor PV-GS19/PV-GS31 Setting up the Windows Messenger „ When you use the Camcorder as a Web Camera„ Windows 98SE/Me Users Click Sign Type in your Sign-in name and password Setting up the MSN MessengerSelect USB Audio Device in the Microphone menu Using MotionDV Studio PV-GS35 Only Installing Video Stream DriverTo start MotionDV Studio Installation of MotionDV Studio„ With USB supplied Connecting the Camcorder to a Personal computer „ With DV Cable optionalIf you no longer need software or driver Uninstall About the SD Memory CardStart MotionDV Studio 5.3E LE SD Memory Card OptionalAbout the compatibility of the card files MiscIndications „ To Change the Display Mode „ Power Save ModeInitializing the Modes „ To Display Date/Time Indication„ Concerning the Power Supply „ Alarm Sounds„ Inserting/Removing the Cassette There are no recorded files on the card„ Self-timer Recording „ Recording on a Card„ Recording with the Built-in LED Video Light „ Quick Start„ Soft-Skin Mode „ Scene Mode„ Zoom Microphone Function „ Digital Zoom Functions„ Manual Shutter Speed Adjustment „ Manual Iris Adjustment„ White Balance „ Playing Back„ Lock Setting „ Using the DV Cable for Recording Digital Dubbing„ Slide Show „ Deleting the Files Recorded on a Card„ About AC Adaptor „ Condensation„ Optimal Use of the Battery „ Cautions for Storage„ LCD Monitor/Viewfinder/Lens Hood Before Requesting Service Problems and Solutions Auto focus function does not work Time code becomes inaccurateRemaining tape time indication disappears Different sounds are reproduced at the same timePush the Reset Switch is displayed Playback picture is not clearCard Recorded pictures are not clear File recorded on a card cannot be deletedUsing the Reset button Explanation of Terms„ Digital Video System „ FocusSpecifications Digital CamcorderAccessory # Description Camcorder Accessory SystemPrice Camcorder Accessory Order Form VisaRequest for Service Notice Panasonic/Quasar Video Products Limited Warranty Limited WarrantyCentralized Factory Servicenter Customer Services DirectoryFor hearing or speech impaired TTY users, TTY Nota Spanish Quick Use Guide/Guía Para Uso RápidoAdvertencia del FCC Guía rápida Cómo utilizar la bateríaInserción de una tarjeta de memoria Cómo utilizar el visorReproducción de una cinta Grabación de una imagen fija en tarjeta PhotoshotReproducción de una tarjeta de memoria Index

PV-GS19, PV-GS31, PV-GS35 specifications

The Panasonic PV-GS35, PV-GS31, and PV-GS19 are compact and versatile camcorders from the renowned Panasonic brand, designed to cater to the needs of budding videographers and seasoned enthusiasts alike. These camcorders are known for their portability, ease of use, and impressive features that enhance video quality and functionality.

The PV-GS35, the flagship model, boasts a 3 CCD image sensor system that offers superior color accuracy and better low-light performance. With a 12x optical zoom lens, users can capture distant subjects without sacrificing clarity. This camcorder supports a 21x digital zoom, expanding its capture capabilities. Additionally, it features a 2.5-inch LCD screen that tilts out for flexible shooting angles, allowing users to frame their shots with ease. The PV-GS35 also includes a digital image stabilizer that compensates for shaky hands, ensuring smooth and stable footage.

The PV-GS31 is a mid-range option that retains many of the robust features found in the GS35 but at a more affordable price. It also incorporates a 3 CCD system, ensuring vivid color reproduction and high-resolution video quality. The GS31 comes with a 10x optical zoom lens complemented by a 200x digital zoom feature, making it ideal for capturing both broad scenes and fine details. Its compact design makes it an excellent choice for on-the-go filming, and the convenient easy mode simplifies settings, making it accessible for novice users.

The Panasonic PV-GS19 is geared toward users who prioritize simplicity and portability while still seeking quality footage. Featuring a single CCD sensor, it doesn't reach the high-end capabilities of its counterparts but offers decent performance for casual shooting. The GS19 sports a 20x optical zoom and a digital zoom feature, perfect for capturing family moments and everyday activities. Its lightweight and compact design makes it an ideal choice for travel.

All three models are equipped with intelligent features such as face detection, various scene modes, and a built-in microphone. These camcorders utilize Panasonic's advanced optical technologies, enriching the overall shooting experience.

In conclusion, the Panasonic PV-GS35, PV-GS31, and PV-GS19 camcorders cater to varying levels of videography expertise and preferences, each providing distinctive features and technologies that allow users to capture memorable moments with remarkable quality. Whether for professional endeavors or less serious applications, these camcorders represent a versatile range of solutions tailored for diverse filming needs.
Top Page Image Contents