Playback Mode
3 Press the [PHOTO SHOT] Button 35 .
35
•A verification message appears.
4 Select [YES] and press the [ENTER] Button
15.
•The selected file is deleted from the Card.
•If [NO] is selected, the file selection is canceled.
To Select and Delete All Files
1 Set [PICTURE PLAYBACK MENU] >> [DELETE] >> [ALL FILES] >> [YES].
19
13 14 15 16 17
• A verification message appears.
2 Select [YES] and press the [ENTER] Button
15.
•All files of Picture Playback Mode are erased.
•A locked file cannot be erased.
•If there are many files on a card, it may take longer to delete files.
Formatting a Card
If a Card becomes unreadable by the Camcorder, format it for reuse. Formatting erases all the data recorded on a Card.
1 Set [PICTURE PLAYBACK MENU] >> [EDITING] >> [CARD FORMAT] >> [YES].
19
13 14 15 16 17
•A confirmation message appears, select [YES] and formatting will be carried out.
•When the formatting is completed, the screen becomes white.
•It may not be able to use the Card formatted by this Camcorder on another unit. In this case, format the Card on the unit which will use the Card. Make sure that valuable pictures are stored on your PC before proceeding.
•A Card formatted on other equipment (e.g. PC) might be unusable or it might take more time for recording. We recommend that you use this equipment to format the Card.
Playing Back on Your TV
By connecting your Camcorder with your TV, the recorded scenes can be viewed on your TV screen.
•Before connecting them, turn off the power of both the Camcorder and TV.
1 Connect the [AV OUT] Jack of the Camcorder and the Video and Audio Input Jacks of the TV.
[VIDEO IN]
[AUDIO IN]
1
•Connect to the TV with the AV Cable 1 .
•When plugging the pin plug of the AV cable into the [AV OUT] Jack, plug it in as far as it goes.
To Make the Indications Appear on the TV Screen
Press the [OSD] Button 49 on the Remote Control (Optional).
49
• For other notes concerning this item, see page 59.
40 | For assistance, please call : |
|