Others
SVGA : |
| 800 or more, less than 1 024 |
XGA : |
| 1 024 or more, less than 1 280 |
SXGA : |
| 1 280 or more, less than 1 600 |
UXGA : |
| 1 600 or more, less than 2 048 |
QXGA : | (Cyan): | 2 048 or more |
PICTURE | Photoshot Mode | |
PICTURE | (Red): | While Photoshot recording is |
|
| activated |
PICTURE | (Green): While the Card being read | |
PICTURE | (Red): | No Card (Still Picture Mode) |
To Change the Counter Display Mode
By changing [C.DISPLAY] on the [DISPLAY]
To Display Date/Time Indication
To display Date/Time Indication, set the appropriate Date/Time in [DATE/TIME] on the [DISPLAY]
You can also press the [DATE/TIME] Button of the Remote Control (Optional) repeatedly to display or change the Date/Time Indication.
To Change the Display Mode
By changing [DISPLAY] on the [DISPLAY]
Progressive Photoshot
You cannot use the Progressive Photoshot Function in the following cases.
When using Tape Recording Mode
•Digital Effect Modes in [EFFECT1]
•Digital Zoom [D.ZOOM]
•1/750 s or faster shutter speed
•When brightness is insufficient
•When the MagicPix Function is ON
•When the Portrait is used
When using Card Recording Mode
•When brightness is insufficient
•When the MagicPix Function is ON
Initializing the Modes
You can change the Menu settings back to the shipping condition.
1 Set [INITIAL] >> [INITIAL SET] >> [YES].
•The initializing takes a little while.
•After the initializing is completed, the [COMPLETED] Indication appears with beeps.
•Initializing will not erase a clock setting (p. 21) that has been adjusted.
Warning/Alarm Indications
If any one of the following indications lights up or flashes, please check the condition of the Camcorder.
DEW (DEW DETECTED/EJECT TAPE): Condensation has occurred. (p. 60)
(CHECK REC TAB):
The accidental erasure prevention slider on the inserted Cassette is open (that is, set to [SAVE]). You are attempting Audio dubbing or Digital dubbing on a Tape while setting the accidental erasure prevention slider to [SAVE].
(TAPE NOT INSERTED):
No Cassette in inserted. (p. 15)
(LOW BATTERY):
The Battery is low. Recharge it. (p. 13)
:
The
(NEED HEAD CLEANING):
The video heads are dirty. (pp. 60~61)
END (TAPE END):
The tape came to an end during recording.
REMOTE (CHECK REMOTE MODE):
Wrong Remote Control Mode has been selected. (p. 13)
UNPLAYABLE TAPE
(OTHER FORMAT):
You are attempting to play back a tape section that has been recorded with a different TV system.
UNABLE TO A.DUB
(LP RECORDED):
Because the original recording was done in LP Mode, audio dubbing cannot be performed.
INCOMPATIBLE TAPE:
This cassette is incompatible.
PUSH THE RESET SWITCH:
Irregular mechanism is detected. Press the [RESET] Button (p. 64). This may solve the problem.
CARD FULL:
Card does not have sufficient memory remaining. Select Picture Playback Mode and delete unnecessary files.
NO CARD:
Card is not inserted.
NO DATA:
There are no recorded files in the card.
UNPLAYABLE CARD:
You are attempting to play back data which is not compatible with this Camcorder.
CARD ERROR:
The Card is not compatible with this Camcorder.
COPY INHIBITED:
Because the medium is protected by a copy guard, images cannot be recorded correctly.
54 | For assistance, please call : |
|