Panasonic NV RZ 15 B operating instructions Reset, Counter to zero, VCR Mode B, 1ALL, Setting

A

12

u 0:00.00		REC	u M 0:00.00		REC
R 0:30	6	14q	R 0:30	6	14q
SP			SP
		AUTO			AUTO

43

REC	REC
	14q
	AUTO

B

1

u 0:00.00	◊
R 0:30

SP

TBC

2

3

u M 0:00.00	◊
R 0:30

SP

TBC

◊

3	4
Turn the [34] Dial to	Press the [SET] Button to
select [COUNTER	select [YES].
RESET].	≥When recording or playback
	starts, the elapsed tape time is
	indicated in hours, minutes and
	seconds. During playback of
	parts of the tape on which no
	recording has been made, this
	indication does not change.
	≥If you rewind the tape further
MF/	than the tape counter position
TRACKING
	[0:00.00], the minus sign [–]
	appears in front of the Tape
	Counter Indication.
	2: Camera Mode
	3: VCR Mode

4		5
After playback or		Press the [5] or [6]
recording is finished:		Button.
Set the [CAMERA/		The tape automatically
OFF/VCR] Switch to		stops approximately at the
[VCR].		position at which you reset
		the counter to zero.
	CAMERA
	OFF
VCR		s SEARCH	SEARCH r
		S6	5

Remarks etc.

∫Changing the Tape Counter Indication By changing the setting for [DISPLAY] on the [DISPLAY SETUP] Sub-Menu of the [VCR FUNCTIONS] or the [CAMERA FUNCTIONS] Main- Menu, the Counter Display Mode can be changed in the order shown in the above illustrations 1–4.

Camera Mode A

1ALL: Elapsed Tape Time Indication (initial setting)

2MEMORY: Memory Stop Indication and Elapsed

Tape Time Indication

3PARTIAL: No Counter Indication

Only a few indications are displayed so that all parts of the picture can be seen clearly. However, when you turn on the Movie Camera, all indications initially appear for a few seconds to inform you of the selected settings.

≥In this condition, if you switch the Movie Camera over to the VCR Mode and then back to the Camera Mode, [ALL] is automatically selected for the Tape Counter Indication.

4OFF: No Counter Indication

In this mode, only the Operation Mode Indications and Warning/Alarm Indications can appear. However, when turning on the Movie Camera, all indications appear for a few seconds to inform you of the selected settings.

VCR Mode B
1ALL:	Elapsed Tape Time Indication (initial
	setting)

2MEMORY: Memory Stop Indication and Elapsed

Tape Time Indication

3OFF: No Counter Indication

In this mode, only the Operation Mode, Warning/Alarm, Insert Editing Mode and Audio Dubbing Mode Indications can appear.

Advanced Operations

61