Panasonic SDR-SW21PC operating instructions SD cards, Battery

Page 103

SD cards

The memory capacity indicated on the SD card label is the maximum capacity for copyright protection and management, which is ordinarily used by the unit, computers, etc.

MiniSD cards require a purpose-specific adaptor. Do not insert just the miniSD card or just the adaptor. Also, do not insert and remove a miniSD card while keeping the adaptor inserted into the unit. (This can cause damage.)

Battery

The rechargeable lithium ion battery used with this unit is readily affected by temperature and humidity. In cold places, the full battery indication may not appear and a low battery warning may appear approx. 5 minutes after starting use. In high temperatures, a protective function may be triggered, preventing use.

After use, always remove and store the battery.

If left inside the unit, the battery may over-discharge because of small amounts of current flow, ultimately damaging the battery.

Place the battery in a plastic bag so as to prevent metal from contacting terminals and store in a cool (15 - 25 ˚C (59 - 77 ˚F)) dry (40 - 60 % RH) place subject to minimal temperature changes.

Storing the battery in extreme cold or high heat may shorten the battery’s service-life. Moreover, places that are hot, humid or oily can rust terminals and cause damage to the battery.

During long-term storage, charge the battery once a year, then use it until depleted and store it again.

Clean battery terminals of adhering dust, etc. ●Prepare a spare battery when going out.

Prepare 3 - 4x more battery power than you plan to use. In cold places such as ski resorts, recording time becomes shorter.

Do not forget the AC adaptor when traveling so that you can recharge

batteries.

●Do not use batteries if damaged or deformed (especially terminals) from dropping, etc.

This can cause damage to the unit. ●Do not throw batteries into fire.

The battery may burst if heated or thrown into fire.

●If the battery does not last long immediately after charging, it has reached the end of its service-life. Purchase a new battery.

VQT2A17 103

Image 103 Contents
VQT2A17 Model No. SDR-SW21P/PCThank you for choosing Panasonic Things You Should KnowResponsible partyPanasonic Corporation of North America SDR-SW21POne Panasonic Way, Secaucus, NJ Important Safety Instructions Battery pack Lithium ion battery pack BatteryAC adaptor Camera and SD card sold separately temperature PrecautionsCarefully observe copyright laws Indemnity concerning recording contentFor the purposes of these operating instructions LCD monitorContents Request for Service Notice SpecificationsOptional accessories Accessory Order FormQuick guide Set the mode dial to OFF Opendoor. the card/batteryInsert the battery Closedoor. the card/batterySelect YES Set the date and time Plug the DC plug into DC input terminal on the unitEnter the date and time →LANGUAGE Set to Start recording Stop recordingSet to Take picture Display and menu language can be changedDuring playback Set to Select and enter the picture to viewSelect YES VW-VBJ10 AccessoriesParts identification Tripod mounting holeHandling Mode dial P.26Using the LCD monitor Using the hand strap suppliedParts identification and handling Handling Before using the unit under waterImportant Waterproof performance Waterproof performanceDry thoroughly in a well-ventilated location Underwater useCurrent is swift, near waterfalls, or in other locations Inspecting the units waterproof performance After using the unit underwater, do not leave it standingCare after underwater use Microphone and speakerType of card Capacity Recommended Panasonic SD/SDHC Memory Cards as of JanuarySD Memory Card SD/SDHC Memory Card Sdhc Memory Cards can be used only with Sdhc devices Precautions in handlingBe careful when sharing cards between devices Write-protecting cardsTo AC outlet Lever AC adaptor AC cable* Setup 1 ChargingSet the mode dial to OFF Insert the battery into the unit and charge itPlug the DC plug into the DC input terminal on the unit Status indicatorIf the status indicator does the following Open the terminal coverCharging time Approx hours 15 minutes SetupRemaining battery capacity indication Charging time and recordable timeDoor.Close the card/battery Setup 3 Inserting/Removing SDInsert/Removecard. the SD When not in use, set the mode dial to OFF Setup 4 Turning power ON/OFF Selecting modesSet to icon of desired mode Turning power ON/OFF from the LCD monitorQuick starts Select settings from the menus. P.28Setting Quick Start IndicatorTo return to the previous screen Menu displayed differs according to modeDisplay the menu Select the top menuDisplay and menu language can be changed. →LANGUAGE Using the cursor buttonsSelect an item Close the menu Enter the selected item Changing the display languageSelect the desired menu Setup 6 Setting the date and timeSetting the date and time Set to or→SETUP→ Power LCD Adjusting the LCD monitorAdjusting the LCD monitor Selectitem. and adjustHold the unit firmly with both hands Recording 1 Before recordingBasic stance Taking pictures underwaterTo set coloring, focus, and brightness automatically Card access lamp Card/battery doorFor SD cards applicable with this unit P.20 To change aspect ratio to To remove sound when record button is pressedSet to Press Start recordingTo change recording mode Recording mode and recording timesIf recording stops →ADVANCED→SHTR EFFECT→OFF Recording 3 Automatic recording still picturesSet to Press Take picture To remove shutter soundHigh highest picture quality Picture qualityTo change picture quality To avoid jitterTo enlarge further Enlarge RestoreRecording 4 Zoom/avoid jitter/maintain Enlarging zoom→ADVANCED→ZOOM MIC→ON Picture brightness in dark locationsAvoid jitter image stabilizer function Apply zoom effect to sounds zoom microphoneRecording for posting videos on YouTube WEB Mode To cancel WEB ModeVQT2A17 Display operation icons Recording 6 Other recording optionsChange operation icons →ADVANCED→FADE COLOR→WHITE / Black Fade-in/Fade-outSelect in on the previous Select function to be Explained Start recordingTo quit halfway through Self-timerRecording 6 Othercont. recording options Backlight compensation functionMagicPix function Soft Skin ModeAim this unit at the subject and position it securely PRE-REC functionVQT2A17 To return to automatic recording Adjusting focus manually manual focus adjustmentRecording 7 Recording manually motion/still pictures Set to orTo cancel the setting Using situation-specific settings Scene ModeSet the mode Setting manuallyAchieve natural colors white balance Auto white balance range To return to automatic adjustment Set to or *Shutter speed adjustment range Adjusting shutter speed shutter speedTo return to automatic adjustment Adjust shutter speedAdjust brightness Adjusting brightness iris/gainIris/gain value adjustment range Recording 8 Useful functions Setting home city and regionSetting the city and region of your travel destination To cancelAvoid wind noise wind noise reduction function Restoring local date and time after returning home→BASIC→GUIDE LINES→ON Enter the picture to view To adjust the volumePlayback 1 Viewing motion pictures Select the desired sceneSelect the date to display Displaying thumbnails by dateFrame-by-frame playback PlaybackFast forward/rewind playback Slow-motion playbackSet to Enter the picture to view Playback 2 Viewing still picturesEditing 1 Deletingpictures motion/still Use a sufficiently charged battery or the AC adaptorDeleting one picture at a time Selecting and deleting multiple pictures To cancel deletion halfway throughDeleted pictures cannot be restored Deleting all pictures→EDIT Scene →SETUP→ Format CARD→YESPreventing accidental deletion Formatting cards→PICT. SETUP→DPOF SET→SET Editing 3 Setting Dpof for still Pictures→PICT. SETUP→ Dpof SET→CANCEL ALLTo display LCD monitor information on TV →SETUP→EXT. DISPLAY→ONWith other 1 Playback on TV ProductsWith other Copying pictures using the AV cable suppliedCopying to video recorders Or DVD recordersPictBridge printers Printing pictures fromAvailable settings Print settingsTo cancel printing Settings not supported by the printer cannot be selectedTime required for copying Reference Using DVD burnersRequired equipment as of January Supported discs 12 cm discConnecting this unit and a DVD burner Copying still pictures to discs To cancel copyingCopying all motion pictures to discs Select thumbnails Select a date Copying selected motion pictures to discsCopying using a DVD burner →EDIT SCENE→DELETE →COPIED →YES Playing back discsExiting Deleting copied motion picturesImage management/DVD production software VideoCam Suite Software on the CD-ROMComputer With aAgreement End User LicenseEnd User License Agreement With a Operating environmentOperating environment required for VideoCam Suite CPU Installing VideoCam Suite Uninstalling the software If the Setup Menu does not start up automaticallyImporting motion pictures and still pictures Using VideoCam SuiteClick or Simple Menu is closed Editing motion pictures and still picturesClosing VideoCam Suite First startupYouTube Uploading video clips toConcerning uploading to YouTube External drive Mass storage Using this unit as anConnecting the unit to a computer Disconnecting the unitThis unit can be used as an external drive SD card folder structureWhen the driver is not recognized When the driver is recognizedChecking the connections Copying still pictures to computers Connecting to a MacintoshComputer Operating environment required for external drivesRecording menu Set the mode dial to Top menu Submenus PurposeMenus OthersSettings/Notices Mode Others 1 Menus Setup menuPurpose Date YES / no OFF Settings/Notices ModeStill picture recording display When recordingOthers 2 LCD monitor displays Motion picture recording displayOperating status P.56 During playbackMotion picture playback display Still picture playback displayMessage What to check Others 3 MessagesMessage Power does not turn on Others 4 TroubleshootingStatus indicator is flashing while using the battery Motion picture recording stops on its own Unit does not recognize the SD card when inserted Speaker volume is lowData cannot be deleted Appears on After disconnecting An error message USB cableDisc is UNUSABLE. Check DISC. appears on the LCD monitor ErrorScene Mode Soft Skin ModeSet and cancel Help ModeOthers 5 Cautions for use When using the unitSD cards BatteryKeep the AC adaptor near both the AC outlet and the AC plug AC adaptorLCD monitor CondensationPanasonic test methodology CleaningWaterproof/dustproof ShockproofSD Video Camera Information for your safety Others 6 SpecificationsBattery pack Information for your safety AC adaptor Information for your safetySpecifications may change without prior notice Accessory No Description Others 7 Optional accessoriesVisa Accessory Order Form For USA and Puerto Rico CustomersFailure to do so will delay your repair Request for Service Notice USA and Puerto Rico OnlyFor hearing or speech impaired TTY users, TTY Centralized Factory Service CenterLimited Warranty United States and Puerto Rico Panasonic Video Products Limited WarrantyLimited Warranty Coverage VQT2A17 Panasonic Product Limited Warranty Warranty For Canadian CustomersIndex Economy ModeConecte el adaptador de CA suministrado Spanish Quick Use Guide/Guía españolaInserte la batería Cierre la tapa de la tarjeta/bateríaAbra la cubierta del terminal Para el uso rápidoIntroduzcahora. la fecha y la Imágenes en movimiento El idioma de la visualización y del menú se puede cambiarDeseada.Seleccione la escena Imágenes en movimientoPóngalo en Durante la reproducción Seleccione SÍF0109KS0 1000 