Panasonic HC-V130 Troubleshooting, It is not a malfunction in the following cases, Error Occurred

Page 89

Others

Troubleshooting

It is not a malfunction in the following cases

A clicking sound is heard

≥ This is the sound of the lens moving and is not a defect.

when the unit is shaken.

This sound will no longer be heard when the unit is turned on

 

and change the mode to

.

 

 

Object seems to be warped.

≥ Object seems to be warped slightly when the object moves

 

across the image very fast, but this is because the unit is using

 

MOS for the image sensor. This is not a malfunction.

 

 

The lens or LCD monitor

≥ This is due to condensation. It is not a malfunction. Please

fog up.

refer to page 2.

 

 

 

 

 

Power

Problem

Check points

This unit cannot be turned ≥ Charge the battery again to ensure it is sufficiently charged.

on.

(l10)

In cold places, the battery using time becomes shorter.

This unit does not stay on ≥ The battery has a limited life. If the operating time is still too

long enough.

short even after the battery is fully charged, the battery has

Battery runs down quickly.

worn out and needs to be replaced.

 

 

 

This unit is turned off

≥ If the unit turns off when you turn off the power to the TV

automatically.

using the TV remote control, the VIERA Link is at work. If you

 

are not using the VIERA Link, set [VIERA Link] to [OFF].

 

(l64)

 

 

This unit cannot be

≥ Remove the battery or AC adaptor, wait about 1 minute and

operated though it is

then reconnect the battery or AC adaptor. Then about

turned on.

1 minute later, turn on the unit again. (Conducting the above

 

operation while the media is being accessed may damage the

This unit does not operate

data on the media.)

normally.

≥ If normal operation is still not restored, detach the power

 

connected, and consult the dealer who you purchased this

 

unit from.

 

 

“ERROR OCCURRED.

≥ The unit has automatically detected an error. Restart the unit

PLEASE TURN UNIT OFF,

by turning the unit off and on.

THEN TURN ON AGAIN.”

≥ The unit will be turned off in about 1 minute if the unit is not

is displayed.

turned off and on.

 

≥ Repair is needed if it is repeatedly displayed even if it is

 

restarted. Detach the power connected, and consult the

 

dealer who you purchased this unit from. Do not attempt to

 

repair the unit by yourself.

- 89 -

Image 89
Contents High Definition Video Camera Read this first Indemnity about recorded ContentAbout the recording format for Recording motion pictures Cards that you can use with This unitFor the purposes of this Contents Approximate number Reading the operating instructionsRecording modes Lens cover Internal stereo microphones Names and Functions of Main PartsPress Battery holder l9  L35 Photoshot button l21 Zoom lever W/T In Recording ModeInserting/removing the battery Power supplyRemoving the battery ≥ Press the power button to turn off the unit. l15Connecting to the AC outlet Charging the batteryCharging with an AC adaptor Open the LCD monitorTurn the power of the PC on Connecting to a PC and chargingCharging/Recording time Battery capacity indicationCharging and recording time Cards that you can use with this unit Recording to a card512 MB/1 GB/2 GB GB/6 GB/8 GB/12 GB/16 GB/24 GB/32 GBInserting/removing an SD card Access lamp Access aCheck that the access lamp has gone off Turning the unit on/off Turning the unit on and off with the power button To turn off the unit Turning the unit on and off with the LCD monitorRecording Mode l 19 Playback Mode l24 Selecting a modeOperate the mode switch to change the mode to or ¬ Change the mode to Select the menu. l26 Setting date and timeSetup # Clock SET Displaying the World time setting L27Basic camera positioning Before recordingBasic motion picture recording Recording yourselfRecording motion pictures Change the mode to Open the LCD monitor≥ Open the lens cover before turning on the unit. l6 1h20mAvchd R3000 Recording still picturesAbout the screen indications in Still Picture Recording Intelligent auto/Manual button Intelligent Auto ModeAuto Focus Intelligent Auto ModeAutomatic White Balance Motion picture/Still picture playback Select the operation icon usingChange the thumbnail display Speaker volume adjustmentMotion picture compatibility Still picture compatibilityAbout the operation icons Using the menu screenAbout the information display Display Using the Setup MenuEXT. Display Clock SETSetup # Link Clock to Daylight Saving# desired setting Select Destination using 2/1 and press the Enter buttonLink Clock to Daylight Saving Destination and the home region will beDate Format DATE/TIMEEconomy Batt Economy ACClose the LCD monitor Setup # Quick Start # onQuick Start Press 2/1 to adjust, and press the Enter button Power LCDAlert Sound LCD SETNumber Reset Hdmi ResolutionTV Aspect Initial SETSetup # Media Status Firmware UpgradeSetup # Firmware Version Info Media StatusEye-Fi Transfer Demo ModeEye-Fi Direct Language¬ Change the mode to Using the ZoomAbout Zoom bar Zoom leverOperation icons Recording functions of operation iconsFade Help ModeBacklight Compensation GuidelinesColor Night Rec PRE-RECIntelligent Contrast Control ≥ Aim the unit at the subject beforehandRecording functions of menus Scene ModeREC Format Zoom ModeRecord Setup # REC Mode # desired setting HA/HG/HE REC Mode≥ Recordable time using the battery l12 Record Setup # E.I.S. # onPress 3 to select Creative ControlMini Miniature Effect 8mm 8mm movie SECOND/10 SECONDS/30 SECONDS/1 MINUTE/2 Minutes Siln Silent movieIntv Time Lapse Rec Auto Slow Shtr Face FramingWind CUT Prioritized face framingShtr Sound Picture SizeManual recording Manual adjustment mode Select WB using the cursor buttonWhite Balance To set the White Balance manuallyManual shutter speed/Iris adjustment Press 2/1 to adjust the focus Select MF using the cursor button to change to Manual FocusRecord Setup # MF Assist # on Recording with Manual FocusPlayback Operations Motion picture playback using operation iconVideo Setup # Resume Play # on Video Setup # Repeat Play # onCreating still picture from motion picture Repeat playbackMove the zoom lever to side Zooming in on a still picture during playback Playback zoomZooming out from the zoomed still picture Select the playback date, then press the Enter button Various playback functionsPlaying back motion pictures/still pictures by date Select the item to change and press the Enter button Select using the cursor button, then press the Enter buttonShort NormalTo delete the scene or still picture being played back Deleting scenes/still picturesWhen you stop deleting halfway Dividing a scene Avchd Edit Scene # Divide # Cancel ALLPress the Menu button to complete dividing Edit Scene # Divide # SETSelect the part for deletion, then press the Enter button Dividing a scene to partially delete iFrame, MP4Stop the playback Select YES and press the Enter buttonProtecting scenes/still pictures Video Setup or PICT. Setup # Scene ProtectPicture quality Watching Video/Pictures on your TVConnect this unit to a TV To display the on-screen Information on the TV Change the mode to to play backSelect the video input on the TV SimpleSetup # Hdmi Resolution # AUTO/1080i/480p Connecting with a Hdmi mini cable¬ Change the mode to Select the menu Playback using Viera LinkWhat is the Viera Link Hdavi Control? Setup # Viera Link # onWhen selecting scenes When playing back Operate with the remote control for the TVAutomatic input switching Other linked operationsCheck before dubbing Dubbing with a Blu-ray disc recorder, video devices, etcHigh-definition picture quality Standard picture qualityTo dub using equipment with a USB terminal To dub using equipment with an SD card slot≥ Turn on the unit About the screen indication of the unitPage ≥ Images are dubbed in standard quality Dubbing in standard picture qualitySetup # Eye-Fi Transfer # on Using the Eye-FicardSetup # Eye-Fi Direct Using Eye-Fi direct modeVideo Setup or PICT. Setup # TRANSFER/PROTECT Selecting files to transferPage HD Writer LE Smart wizard What you can do with a PCImportant Notice End User License Agreement Page Operating environment for HD Writer LE Operating environmentCPU RAMSound SpaceInterface Other requirementsTo use the HD Writer LE Uninstalling HD Writer LE InstallationInsert the CD-ROM into the PC Click Yes Click NextConnect this unit to a PC Connecting to a PCTo disconnect USB cable safely Example folder structure of an SD card About the PC displayCopying your still pictures to Your PC Starting HD Writer LE Operating environment If using MacCopying still pictures on a Mac Connect this unit to a Mac via the supplied USB cableRecording indications Indications3000 OPEN/F2.0Confirmatory indications Playback indicationsIndication of connection to other devices Check Card About recoveryMessages Error Occurred TroubleshootingIt is not a malfunction in the following cases Please Turn Unit OFFDARK, or Lens Cover Environment TOOHorizontally SD card by connectingAnother device, it is not RecognizedWhen the USB cable is Problem Check points When connected byDisconnected, an error ProblemAbout this unit When carrying the unit, do not drop or bump itCleaning About the AC adaptor About the batteryWhen disposing of or giving away the SD card, note that About status indicator during chargingAbout the SD card LCD monitorLicenses About copyrightCarefully observe copyright Laws Recording format Recording modes/approximate recordable timePicture size/frame rate 19 min SD card 16 GB 20 min 21 h 64 GB 84 hApproximate number of recordable pictures When attaching the Suction Cup Mount Optional accessoriesWhen removing the Suction Cup Mount Lock side to lock itPanasonic Corporation