Panasonic HC-V130 Using Eye-Fi direct mode, Selecting files to transfer, Setup # Eye-Fi Direct

Page 71

∫Using Eye-Fi direct mode

The files can be transferred directly from the Eye-Fi card to a smartphone or tablet without going through the access point when necessary setting is performed in a PC in advance.

≥Install the software supplied with the Eye-Fi card on your PC, and configure the Eye-Fi direct mode settings.

≥Inserting an Eye-Fi card (commercially available) to the unit

Select the menu.

: [SETUP] # [Eye-Fi DIRECT]

≥This mode is displayed only when [Eye-Fi TRANSFER] is set to [ON].

≥The mode will be canceled using the following steps. j When the unit is turned off

j If you start recording motion picture

In addition to the steps above, the mode may also be canceled by the Eye-Fi card.

≥When connected via Eye-Fi direct mode, [ECONOMY (BATT)]/[ECONOMY (AC)] are disabled.

∫Selecting files to transfer

If you perform the required settings in advance on your PC, you can transfer selected files alone. For settings methods etc., please read the card operating instructions or consult the card manufacturer.

≥Install the software supplied with the Eye-Fi card on your PC, and configure the selection transfer settings.

≥Inserting an Eye-Fi card (commercially available) to the unit

≥Set the mode switch to , select the playback mode selection icon, and set the video/ still picture to [iFrame], [MP4], or [PICTURE] (l24)

Select the menu.

: [VIDEO SETUP] or [PICT. SETUP] # [TRANSFER/PROTECT]

≥The settings method is the same as that for the [SCENE PROTECT] settings. (l60)

≥If the selected transfer setting is not configured on the computer, [SCENE PROTECT] is displayed and the selected transfer setting cannot be configured.

≥When the write protect switch on the Eye-Fi card is on the LOCK side, [SCENE PROTECT] is displayed and selected transfer setting is disabled. Please unlock the write protect switch.

≥The protect setting is also applied to the files for which [TRANSFER/PROTECT] is set. To delete a file, first cancel [TRANSFER/PROTECT] and then perform the operation.

≥AVCHD scenes cannot be used as the selected transfer setting.

- 71 -

Image 71

Contents High Definition Video Camera Cards that you can use with This unit Indemnity about recorded ContentRead this first About the recording format for Recording motion picturesFor the purposes of this Contents Approximate number Reading the operating instructionsRecording modes Lens cover Internal stereo microphones Names and Functions of Main PartsPress Battery holder l9  L35 Photoshot button l21 Zoom lever W/T In Recording Mode≥ Press the power button to turn off the unit. l15 Power supplyInserting/removing the battery Removing the batteryOpen the LCD monitor Charging the batteryConnecting to the AC outlet Charging with an AC adaptorTurn the power of the PC on Connecting to a PC and chargingCharging/Recording time Battery capacity indicationCharging and recording time GB/6 GB/8 GB/12 GB/16 GB/24 GB/32 GB Recording to a cardCards that you can use with this unit 512 MB/1 GB/2 GBInserting/removing an SD card Access lamp Access aCheck that the access lamp has gone off Turning the unit on and off with the LCD monitor Turning the unit on and off with the power buttonTurning the unit on/off  To turn off the unitRecording Mode l 19 Playback Mode l24 Selecting a modeOperate the mode switch to change the mode to or Displaying the World time setting L27 Setting date and time¬ Change the mode to Select the menu. l26 Setup # Clock SETRecording yourself Before recordingBasic camera positioning Basic motion picture recording1h20m Change the mode to Open the LCD monitorRecording motion pictures ≥ Open the lens cover before turning on the unit. l6Avchd R3000 Recording still picturesAbout the screen indications in Still Picture Recording Intelligent auto/Manual button Intelligent Auto ModeAuto Focus Intelligent Auto ModeAutomatic White Balance Motion picture/Still picture playback Select the operation icon usingStill picture compatibility Speaker volume adjustmentChange the thumbnail display Motion picture compatibilityAbout the operation icons Using the menu screenAbout the information display Clock SET Using the Setup MenuDisplay EXT. DisplayDestination and the home region will be Select Destination using 2/1 and press the Enter buttonSetup # Link Clock to Daylight Saving# desired setting Link Clock to Daylight SavingEconomy AC DATE/TIMEDate Format Economy BattClose the LCD monitor Setup # Quick Start # onQuick Start LCD SET Power LCDPress 2/1 to adjust, and press the Enter button Alert SoundInitial SET Hdmi ResolutionNumber Reset TV AspectMedia Status Firmware UpgradeSetup # Media Status Setup # Firmware Version InfoLanguage Demo ModeEye-Fi Transfer Eye-Fi DirectZoom lever Using the Zoom¬ Change the mode to About Zoom barOperation icons Recording functions of operation iconsGuidelines Help ModeFade Backlight Compensation≥ Aim the unit at the subject beforehand PRE-RECColor Night Rec Intelligent Contrast ControlRecording functions of menus Scene ModeREC Format Zoom ModeRecord Setup # E.I.S. # on REC ModeRecord Setup # REC Mode # desired setting HA/HG/HE ≥ Recordable time using the battery l12Press 3 to select Creative ControlMini Miniature Effect 8mm 8mm movie SECOND/10 SECONDS/30 SECONDS/1 MINUTE/2 Minutes Siln Silent movieIntv Time Lapse Rec Prioritized face framing Face FramingAuto Slow Shtr Wind CUTShtr Sound Picture SizeManual recording To set the White Balance manually Select WB using the cursor buttonManual adjustment mode White BalanceManual shutter speed/Iris adjustment Recording with Manual Focus Select MF using the cursor button to change to Manual FocusPress 2/1 to adjust the focus Record Setup # MF Assist # onPlayback Operations Motion picture playback using operation iconRepeat playback Video Setup # Repeat Play # onVideo Setup # Resume Play # on Creating still picture from motion pictureMove the zoom lever to side Zooming in on a still picture during playback Playback zoomZooming out from the zoomed still picture Select the playback date, then press the Enter button Various playback functionsPlaying back motion pictures/still pictures by date Normal Select using the cursor button, then press the Enter buttonSelect the item to change and press the Enter button ShortTo delete the scene or still picture being played back Deleting scenes/still picturesWhen you stop deleting halfway Edit Scene # Divide # SET Edit Scene # Divide # Cancel ALLDividing a scene Avchd Press the Menu button to complete dividingSelect YES and press the Enter button Dividing a scene to partially delete iFrame, MP4Select the part for deletion, then press the Enter button Stop the playbackProtecting scenes/still pictures Video Setup or PICT. Setup # Scene ProtectPicture quality Watching Video/Pictures on your TVConnect this unit to a TV Simple Change the mode to to play backTo display the on-screen Information on the TV Select the video input on the TVSetup # Hdmi Resolution # AUTO/1080i/480p Connecting with a Hdmi mini cableSetup # Viera Link # on Playback using Viera Link¬ Change the mode to Select the menu What is the Viera Link Hdavi Control?Other linked operations Operate with the remote control for the TVWhen selecting scenes When playing back Automatic input switchingStandard picture quality Dubbing with a Blu-ray disc recorder, video devices, etcCheck before dubbing High-definition picture qualityAbout the screen indication of the unit To dub using equipment with an SD card slotTo dub using equipment with a USB terminal ≥ Turn on the unitPage ≥ Images are dubbed in standard quality Dubbing in standard picture qualitySetup # Eye-Fi Transfer # on Using the Eye-FicardSelecting files to transfer Using Eye-Fi direct modeSetup # Eye-Fi Direct Video Setup or PICT. Setup # TRANSFER/PROTECTPage HD Writer LE Smart wizard What you can do with a PCImportant Notice End User License Agreement Page RAM Operating environmentOperating environment for HD Writer LE CPUOther requirements SpaceSound InterfaceTo use the HD Writer LE Click Yes Click Next InstallationUninstalling HD Writer LE Insert the CD-ROM into the PCConnect this unit to a PC Connecting to a PCTo disconnect USB cable safely Example folder structure of an SD card About the PC displayCopying your still pictures to Your PC Starting HD Writer LE Connect this unit to a Mac via the supplied USB cable If using MacOperating environment Copying still pictures on a MacOPEN/F2.0 IndicationsRecording indications 3000Confirmatory indications Playback indicationsIndication of connection to other devices Check Card About recoveryMessages Please Turn Unit OFF TroubleshootingError Occurred It is not a malfunction in the following casesDARK, or Lens Cover Environment TOORecognized SD card by connectingHorizontally Another device, it is notProblem Problem Check points When connected byWhen the USB cable is Disconnected, an errorAbout this unit When carrying the unit, do not drop or bump itCleaning About the AC adaptor About the batteryLCD monitor About status indicator during chargingWhen disposing of or giving away the SD card, note that About the SD cardLicenses About copyrightCarefully observe copyright Laws 19 min SD card 16 GB 20 min 21 h 64 GB 84 h Recording modes/approximate recordable timeRecording format Picture size/frame rateApproximate number of recordable pictures Lock side to lock it Optional accessoriesWhen attaching the Suction Cup Mount When removing the Suction Cup MountPanasonic Corporation