Panasonic HC-V130 owner manual Problem Check points When connected by, USB cable, this unit is not

Page 92

 

With a PC

Problem

Check points

When connected by the

≥ After re-inserting the SD card into the unit, reconnect the

USB cable, this unit is not

supplied USB cable.

detected by the PC.

≥ Select another USB terminal on the PC.

 

≥ Check the operating environment. (l 77, 85)

 

≥ Connect the supplied USB cable again after restarting the PC

 

and turning on this unit again.

 

 

When the USB cable is

≥ To disconnect the USB cable safely, double-click the

disconnected, an error

icon in the task tray and follow the instructions on the screen.

message will appear on

 

the PC.

 

 

 

Cannot see the PDF

≥ You will need Adobe Acrobat Reader 5.0 or later or Adobe

operating instructions for

Reader 7.0 or later to read the PDF operating instructions for

HD Writer LE 2.1.

HD Writer LE 2.1.

 

 

 

Others

Problem

Check points

If the SD card is inserted in

≥ If the SD card is formatted on a PC, it may not be recognized

this unit, it is not

by this unit. Use this unit to format SD cards. (l32)

recognized.

 

 

 

If AVCHD scenes do not change smoothly when played back on

another device

The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit.

Just how smoothly the scenes will be played back depends on the playback unit. Depending on the unit used, the images may stop moving and become still for a moment even when none of the following conditions are applicable.

A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every 4 GB of data when played back with another device.

It may not play back smoothly when the editing of scenes was done with the HD Writer LE 2.1, but it will play back smoothly if you set the seamless settings in the HD Writer LE 2.1. Refer to the operating instructions for the HD Writer LE 2.1.

Principal reasons for not playing back smoothly

When the scenes were recorded on different dates

When scenes lasting under 3 seconds have been recorded

When PRE-REC was used for recording

When the Miniature Effect recording is used

When the Time Lapse Recording is used

When deleting scenes

When scenes recorded more than 99 scenes on the same date

- 92 -

Image 92
Contents High Definition Video Camera Indemnity about recorded Content Read this firstAbout the recording format for Recording motion pictures Cards that you can use with This unitFor the purposes of this Contents Approximate number Reading the operating instructionsRecording modes Names and Functions of Main Parts Lens cover Internal stereo microphonesPress Battery holder l9  Photoshot button l21 Zoom lever W/T In Recording Mode L35Power supply Inserting/removing the batteryRemoving the battery ≥ Press the power button to turn off the unit. l15Charging the battery Connecting to the AC outletCharging with an AC adaptor Open the LCD monitorConnecting to a PC and charging Turn the power of the PC onCharging/Recording time Battery capacity indicationCharging and recording time Recording to a card Cards that you can use with this unit512 MB/1 GB/2 GB GB/6 GB/8 GB/12 GB/16 GB/24 GB/32 GBInserting/removing an SD card Access lamp Access aCheck that the access lamp has gone off Turning the unit on and off with the power button Turning the unit on/off To turn off the unit Turning the unit on and off with the LCD monitorRecording Mode l 19 Playback Mode l24 Selecting a modeOperate the mode switch to change the mode to or Setting date and time ¬ Change the mode to Select the menu. l26Setup # Clock SET Displaying the World time setting L27Before recording Basic camera positioningBasic motion picture recording Recording yourselfChange the mode to Open the LCD monitor Recording motion pictures≥ Open the lens cover before turning on the unit. l6 1h20mAvchd R3000 Recording still picturesAbout the screen indications in Still Picture Recording Intelligent Auto Mode Intelligent auto/Manual buttonAuto Focus Intelligent Auto ModeAutomatic White Balance Select the operation icon using Motion picture/Still picture playbackSpeaker volume adjustment Change the thumbnail displayMotion picture compatibility Still picture compatibilityAbout the operation icons Using the menu screenAbout the information display Using the Setup Menu DisplayEXT. Display Clock SETSelect Destination using 2/1 and press the Enter button Setup # Link Clock to Daylight Saving# desired settingLink Clock to Daylight Saving Destination and the home region will beDATE/TIME Date FormatEconomy Batt Economy ACClose the LCD monitor Setup # Quick Start # onQuick Start Power LCD Press 2/1 to adjust, and press the Enter buttonAlert Sound LCD SETHdmi Resolution Number ResetTV Aspect Initial SETFirmware Upgrade Setup # Media StatusSetup # Firmware Version Info Media StatusDemo Mode Eye-Fi TransferEye-Fi Direct LanguageUsing the Zoom ¬ Change the mode toAbout Zoom bar Zoom leverRecording functions of operation icons Operation iconsHelp Mode FadeBacklight Compensation GuidelinesPRE-REC Color Night RecIntelligent Contrast Control ≥ Aim the unit at the subject beforehandScene Mode Recording functions of menusZoom Mode REC FormatREC Mode Record Setup # REC Mode # desired setting HA/HG/HE≥ Recordable time using the battery l12 Record Setup # E.I.S. # onPress 3 to select Creative ControlMini Miniature Effect 8mm 8mm movie SECOND/10 SECONDS/30 SECONDS/1 MINUTE/2 Minutes Siln Silent movieIntv Time Lapse Rec Face Framing Auto Slow ShtrWind CUT Prioritized face framingPicture Size Shtr SoundManual recording Select WB using the cursor button Manual adjustment modeWhite Balance To set the White Balance manuallyManual shutter speed/Iris adjustment Select MF using the cursor button to change to Manual Focus Press 2/1 to adjust the focusRecord Setup # MF Assist # on Recording with Manual FocusMotion picture playback using operation icon Playback OperationsVideo Setup # Repeat Play # on Video Setup # Resume Play # onCreating still picture from motion picture Repeat playbackMove the zoom lever to side Zooming in on a still picture during playback Playback zoomZooming out from the zoomed still picture Select the playback date, then press the Enter button Various playback functionsPlaying back motion pictures/still pictures by date Select using the cursor button, then press the Enter button Select the item to change and press the Enter buttonShort NormalDeleting scenes/still pictures To delete the scene or still picture being played backWhen you stop deleting halfway Edit Scene # Divide # Cancel ALL Dividing a scene AvchdPress the Menu button to complete dividing Edit Scene # Divide # SETDividing a scene to partially delete iFrame, MP4 Select the part for deletion, then press the Enter buttonStop the playback Select YES and press the Enter buttonVideo Setup or PICT. Setup # Scene Protect Protecting scenes/still picturesPicture quality Watching Video/Pictures on your TVConnect this unit to a TV Change the mode to to play back To display the on-screen Information on the TVSelect the video input on the TV SimpleConnecting with a Hdmi mini cable Setup # Hdmi Resolution # AUTO/1080i/480pPlayback using Viera Link ¬ Change the mode to Select the menuWhat is the Viera Link Hdavi Control? Setup # Viera Link # onOperate with the remote control for the TV When selecting scenes When playing backAutomatic input switching Other linked operationsDubbing with a Blu-ray disc recorder, video devices, etc Check before dubbingHigh-definition picture quality Standard picture qualityTo dub using equipment with an SD card slot To dub using equipment with a USB terminal≥ Turn on the unit About the screen indication of the unitPage Dubbing in standard picture quality ≥ Images are dubbed in standard qualityUsing the Eye-Ficard Setup # Eye-Fi Transfer # onUsing Eye-Fi direct mode Setup # Eye-Fi DirectVideo Setup or PICT. Setup # TRANSFER/PROTECT Selecting files to transferPage What you can do with a PC HD Writer LE Smart wizardImportant Notice End User License Agreement Page Operating environment Operating environment for HD Writer LECPU RAMSpace SoundInterface Other requirementsTo use the HD Writer LE Installation Uninstalling HD Writer LEInsert the CD-ROM into the PC Click Yes Click NextConnecting to a PC Connect this unit to a PCTo disconnect USB cable safely Example folder structure of an SD card About the PC displayCopying your still pictures to Your PC Starting HD Writer LE If using Mac Operating environmentCopying still pictures on a Mac Connect this unit to a Mac via the supplied USB cableIndications Recording indications3000 OPEN/F2.0Confirmatory indications Playback indicationsIndication of connection to other devices Check Card About recoveryMessages Troubleshooting Error OccurredIt is not a malfunction in the following cases Please Turn Unit OFFEnvironment TOO DARK, or Lens CoverSD card by connecting HorizontallyAnother device, it is not RecognizedProblem Check points When connected by When the USB cable isDisconnected, an error ProblemAbout this unit When carrying the unit, do not drop or bump itCleaning About the battery About the AC adaptorAbout status indicator during charging When disposing of or giving away the SD card, note thatAbout the SD card LCD monitorLicenses About copyrightCarefully observe copyright Laws Recording modes/approximate recordable time Recording formatPicture size/frame rate 19 min SD card 16 GB 20 min 21 h 64 GB 84 hApproximate number of recordable pictures Optional accessories When attaching the Suction Cup MountWhen removing the Suction Cup Mount Lock side to lock itPanasonic Corporation