
Charging the battery
When this unit is purchased, the battery is not charged. Charge the battery fully before using this unit for the first time.
∫Charging with an AC adaptor.
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.
Important:
≥The AC adaptor and USB cable are for use with this unit only. Do not use them with other equipment. Similarly, do not use AC adaptors and USB cables from other equipment with this unit.
≥The battery cannot be charged when the power is on. Press the power button to turn off the power. (l 15)
≥It is recommended to charge the battery in a temperature between 10 oC and 30 oC (50 oF and 86 oF). (The battery temperature should also be the same.)
|
| 1 Open the LCD monitor. | |
|
| 2 Connect the USB cable to the AC | |
| | adaptor. | |
≥ Check that the plug portion of the AC | |||
|
| adaptor is not loose or misaligned. | |
| | 3 Plug the AC adaptor into the AC | |
| outlet. | ||
| | 4 Connect the USB cable to the | |
| unit. | ||
| | ≥ The status indicator C will flash red with | |
| approx. 2 seconds period (off for approx. 1 | ||
A USB terminal |
| ||
| second, on for approx. 1 second), indicating | ||
B To the AC outlet |
| ||
| that charging has begun. | ||
≥ Insert the plugs as far as they will go. | |||
It will turn off when the charging is | |||
|
| ||
|
| completed. |
∫Connecting to the AC outlet
If you turn on the unit while connecting with the AC adaptor, you can use the unit with power supplied from the outlet.
When recording for a long time, keep the AC adaptor connected and use it together with the battery. This allows you to continue the recording even if a power failure occurs or the AC adaptor is unplugged from the AC outlet by accident.
11
SQT0034