Panasonic H-HS12035 Attaching the Lens, Turn the lens rear cap to detach it, Detaching the Lens

Page 6

Attaching/Detaching the Lens

≥Refer also to the camera’s owner’s manual for attaching and detaching the lens.

∫Attaching the Lens

≥Check that the camera is turned off.

1 Turn the lens rear cap to detach it.

A: Lens Rear Cap

2 Align the lens fitting marks B (red marks) on the camera body and the lens and then rotate the lens in the direction of the arrow until it clicks.

•Do not press the lens release button C when you attach a lens.

•Do not try to attach the lens when holding it at an angle to the camera body as the lens mount may get scratched.

•Check that the lens is attached correctly.

6

∫Detaching the Lens

≥Check that the camera is turned off.

While pressing on the lens release button D, rotate the lens toward the arrow until it stops and then remove.

•Attach the lens rear cap so

that the lens contact point does not get scratched.

•Attach the body cap to the camera so no dirt or dust will get inside the main unit.

∫Attaching and Detaching the Lens Cap

Pinch the lens cap as shown in the figure to attach or detach.

• Be careful not to lose the lens cap.

VQT4G28

Image 6

Contents Model No. H-HS12035 F0512SM0Information for Your Safety ContentsFollowing Applies only in the U.S.A Lens Care About Condensation Fogging of the Lens≥ Do not press the lens with excessive force Supplied Accessories Inspection to be performed when you unpack the unitLens Storage Bag Lens Hood Lens Cap Lens Rear Cap Detaching the Lens Attaching the LensTurn the lens rear cap to detach it ≥ Check that the camera is turned offAttaching Filters Fit to the markRotate to focus when taking pictures with manual focus Names and Functions of ComponentsTroubleshooting Specifications Limited Warranty Panasonic Digital Still Camera Accessories Limited WarrantyLimited Warranty Limits And Exclusions Customer Services Directory United States and Puerto Rico For Canada Panasonic Canada IncLimitations and Exclusions Búsqueda de averías Información para su seguridadPrevención contra las averías Si ve este símboloLO Siguiente Sólo SE Aplica EN LOS EE. UU Atención del objetivo Accesorios suministrados Acerca de la condensación Empañamiento del objetivoControles a realizar cuando va a desembalar la unidad Alinee las marcas para ajustar el objetivo B Unir y quitar el objetivoUnión del objetivo Separación del objetivoUnión de los filtros Ajustando hacia la marcaNombres y funciones de los componentes NotaPrecauciones para el uso Búsqueda de averías Especificaciones