RECORDING SETUP screen (continued)
Item | Display |
| Description of settings |
|
|
mode |
|
|
| ||
|
|
|
|
| |
|
|
|
|
|
|
MIC GAIN 2 | (Camera) | Sets the input level of the external microphone connected to the INPUT |
|
| |
|
| 2 terminal. (Page 51) |
|
| |
|
|
|
| ||
25M REC CH SEL | (Camera) | Selects the recording audio channel for DVCPRO and DV formats. |
|
| |
|
| (Page 51) |
|
| |
|
| 2CH, 4CH |
|
| |
|
| <Notes> |
|
| |
|
| • | Even when 4CH is selected as this item’s setting, the signals will be |
|
|
|
|
| input to two channels (always CH1 and CH2) when there are two |
|
|
|
| • | 1394 input channels. |
|
|
|
| Similarly, even when 4CH is selected, the 1394 output signals will be |
|
| |
|
|
| delivered to two channels (always CH1 and CH2). |
|
|
1394 TC REGEN | (MCR) | Selects the time code used for recording the signal from equipment |
|
| |
|
| connected to the 1394 terminal. |
|
| |
|
| ON: |
|
| |
|
| Records using the time code of the signal input through the 1394 |
|
| |
|
| terminal. |
|
| |
|
| OFF: |
|
| |
|
| Records using the time code set in TC MODE/TCG. |
|
| |
|
| • | If you select ON here, this has priority over the settings in TC MODE/ |
|
|
|
| • | TCG. |
|
|
|
| If there is no input to the 1394 terminal, the camera follows the |
|
| |
|
|
| settings in TC MODE/TCG. |
|
|
TC MODE | (Camera) | Selects the correction mode of the internal time code generator. |
|
| |
| (MCR) | DF: Uses the drop frame mode. |
|
| |
|
| NDF: Uses the |
|
| |
|
| • | The |
|
|
|
|
| rate of recording format to 24P, 24PA or 24PN. |
|
|
TCG | (Camera) | Sets the mode in which you advance the time code. |
|
| |
| (MCR) | FREE RUN: |
|
| |
|
| The time code is advanced regardless of the operation mode. |
|
| |
|
| • | When setting a frame rate other than 24P during operation with the |
|
|
|
|
| 720P/24PN format, the FREE RUN operation for the time code will |
|
|
|
|
| not be performed, and the REC RUN operation will be performed |
|
|
|
|
| instead. It is the same when setting a frame rate other than 30P |
|
|
|
|
| during operation with the 720P/30PN format. |
|
|
|
| REC RUN: |
|
| |
|
| The time code is advanced only when recording. |
|
| |
TC PRESET | (Camera) | Sets the initial time code. |
|
| |
| (MCR) | • | Set the frame value to 0 or a multiple of 5 when you set recording |
|
|
|
|
| frame rate of recording format to 24P, 24PA or 24PN. If any other |
|
|
|
|
| value, the recorded time code will |
|
|
1394 UB REGEN | (MCR) | Selects the user information used when recording the signals from |
|
| |
|
| equipment connected to the 1394 terminal. |
| Menu | |
|
| ON: |
| ||
|
|
|
| ||
|
| Records using the user information of the signal input through the 1394 |
|
| |
|
| terminal. |
|
| |
|
| OFF: |
|
| |
|
|
| |||
|
| Records using the user information set in UB MODE. |
|
| |
|
| • | If you select ON here, this has priority over the setting in UB MODE. |
|
|
|
| • | The user information is recorded only when the signal contains the |
|
|
|
| • | user information. |
|
|
|
| If there is no input to the 1394 terminal, the camera follows the UB |
|
| |
|
|
| MODE settings. |
|
|
___indicates the factory setting. | 105 |