Panasonic AG-HPX170 manual 107, Playback Functions screen, AV IN/OUT Setup screen

PLAYBACK FUNCTIONS screen

Item	Display	Description of settings
	mode
AUDIO OUT	(MCR)	Sets the audio signals to output from the AUDIO OUT pin jack when
		the P2 card or the tape is played back.
		CH1 · CH2:
		CH1 output = CH1 signals, CH2 output = CH2 signals
		CH1:
		CH1 output = CH1 signals, CH2 output = CH1 signals
		CH2:
		CH1 output = CH2 signals, CH2 output = CH2 signals
		CH3 · CH4:
		CH1 output = CH3 signals, CH2 output = CH4 signals
		CH3:
		CH1 output = CH3 signals, CH2 output = CH3 signals
		CH4:
		CH1 output = CH4 signals, CH2 output = CH4 signals

AV IN/OUT SETUP screen

Item	Display	Description of settings
	mode
CMPNT/SDI SEL	(Camera)	Selects the type of component terminal or SDI connector.
	(MCR)	AUTO: Monitor with D4 terminal (720P/1080i/480i output)
		1080i: Monitor with D3 terminal (1080i/480i output)
		480i: Monitor with D1 terminal (480i output)
		Only video recorded at 720P is cross-converted to 1080i. Cross-
		conversion does not take place in other cases.
SDI OUT	(Camera)	Selects video output from component terminal or SDI OUT terminal.
	(MCR)	ON: Video is not output via the component terminal but from the SDI
		connector.
		OFF: Video is output via the component terminal but not from the SDI
		connector.
SDI METADATA	(Camera)	Determines whether or not metadata is superimposed on SDI signals
	(MCR)	during HD-SDI output.
		ON: Superimposes metadata.
		OFF: Does not superimpose metadata.
SDI EDH	(Camera)	Determines whether or not EDH is superimposed on SD-SDI signals
	(MCR)	during SD-SDI output.
		ON: Superimposes EDH.
		OFF: Does not superimpose EDH.
DOWNCON MODE	(Camera)	Switches down-conversion output mode.
	(MCR)	SIDE CROP: Crops the right and left edges of the images with the 4:3
		aspect ratio.
		LETTER BOX: Adds black bands at the top and bottom of the images,
		and the images with the 16:9 aspect ratio are displayed in the 4:3	Menu
		aspect ratio.
		SQUEEZE: Select this option for 16:9 aspect ratio images. When
		viewed on a 4:3 aspect ratio monitor, images are squeezed horizontally.
HP MODE	(Camera)	Selects the sound heard through the headphones.
		LIVE:
		The sound which has been input from the microphone is output as is.
		This setting is selected when delays in the sound are annoying.
		RECORDING:
		The sound in the status which is to be recorded (the sound
		synchronized with the images) is output.
TEST TONE	(Camera)	Determines whether or not a test tone is output to channels 1, 2, 3 and
		4 when BARS is set to ON.
		ON: Outputs a test tone to channels 1, 2, 3 and 4.
		• The reference level is -12 dB.
		OFF: Does not output a test tone.

___indicates the factory setting. 107