Name Brief description, Remove the inner cover

Introduction

No	Name	Brief description

1	Cover dome	Covers the inner cover, lens, and main body to protect them.

2	Inner cover	Covers the main body to protect it.
3	Wing locker	Push a long thin screwdriver into its narrow spot and press it outward when you want to
3	Wing locker	remove the inner cover.
		remove the inner cover.
4	Main body	Includes a lens, a switch board, a PCB board, screws, and such.
5	Mount bracket	Used as a ceiling or wall ﬁxture. It is ﬁxed using three long tab screws provided in the
5	Mount bracket	package.
		package.
6	Wiring Passage	This passage is designed to make arrangement of the cables if you drill a hole to extend the wiring.

7	Zoom lever	Using this lever, the lens zoom can be adjusted and ﬁxed.

8	Focus lever	The lens focus can be adjusted by rotating it left or right. Rotate it clockwise for ﬁxing.

9	Tilt ﬁxing screw	Using this screw, the slope of the lens can be adjusted and ﬁxed.

10	4-way Switch	This switch is used to set and adjust the settings of the camera’s functions.

11	Groove mark	To attach the Main body to the Mount bracket, align this groove mark on the Main body with
11	Groove mark	the wide groove in the CAMERA FRONT side on the Mount bracket.

12	Locker	Used to open or close the Cover dome. To open the cover dome, press the locker.

		Push it outward and rotate the main body in UNLOCK direction when you want to remove
13	Lock releaser	the Mount bracket from the Main body or to remove the installed camera from the Mount
		bracket.
14	Cable	Connect the Video connector to BNC cable and Power connector to power adapter.

❖

•

10 – DIGITAL COLOR DOME CAMERA

Introduction

Name

Brief description

Covers the inner cover, lens, and main body to protect them.

Covers the main body to protect it.

remove the inner cover.

package.

Using this lever, the lens zoom can be adjusted and ﬁxed.

the wide groove in the CAMERA FRONT side on the Mount bracket.

bracket.