How to use OSD Menu
If you press the SETUP switch with a NIGHT sub menu selected, you will see a menu where you can set Burst to OFF/ON.
If BURST is set to ON, the Burst signal will output together with the
You can set the BURST option to OFF/ON, or select to output the Burst signal in NIGHT mode.
•AUTO
The camera will automatically switch between DAY and NIGHT mode, according to the lighting condition.
If you press the SETUP switch with an AUTO- based sub menu selected, you will see the appropriate screen.
AUTO |
| |
BURST |
| OFF |
DAYÆNIGHT |
|
|
BRIGHTNESS |
| MID |
DWELL TIME |
| 2S |
NIGHTÆDAY |
|
|
BRIGHTNESS |
| MID |
DWELL TIME |
| 5S |
MASK AREA |
| 1 2 |
for which you can select from LOW, MID, and HIGH. As you adjust it from HIGH to LOW, the screen switches to black and white mode under the darker situation.
DWELL TIME of DAYÆNIGHT sets the time to maintain switched black and white mode.
The BRIGHTNESS of NIGHTÆDAY sets the brightness degree of BW to color switching, for which you can select from LOW, MID, and HIGH. As you adjust it from HIGH to LOW, the screen switches to color mode under the darker situation.
DWELL TIME of NIGHTÆDAY sets the time to maintain switched color mode.
The MASK AREA menu is used to prevent unintended mode switching or inability of determining the switching due to existence of high spot light source at night.
If you press the SETUP switch in item 1 or 2 of the MASK AREA menu, you will see a menu where you can specify an area to MASK.
MASK AREA
<SIZE> <LOCATION>
❖
•
You can set the BURST option to OFF/ON, or select to output the Burst signal in NIGHT mode.
The BRIGHTNESS of DAYÆNIGHT sets the |
| |
|
| |
brightness degree of color to BW switching, |
|
|
22 – DIGITAL COLOR DOME CAMERA