How to use OSD Menu
- How to set the point
You can set each position of the 4 points.
①If you press the SETUP switch in <POINT>, you will see the points available in the PRIVACY ZONE. Each time you press the SETUP switch, the points available will move.
②Use the cdef switch to set the position of each point. Set each position of the four points and press the SETUP switch to complete the positioning.
-How to set the position
You can move the position of the overall area.
| ① By pressing the SETUP switch in |
| <POSITION>, you can move the overall |
| position of the privacy zone. |
| ② Use the cdef switch to move the |
L | position and press the SETUP switch to |
confirm it. | |
| Note : |
| – If more than one PRIVACY ZONE is specified and the |
| PRIVACY SET is set to ON, the PIP function will be |
| deactivated. |
| – If the 12th PRIVACY ZONE is specified, the LINE function |
| of FENCE will be deactivated. |
OTHER SET
eOTHER SETf |
|
|
|
FACTORY DEFAULTS | |
OSD COLOR | BW |
❖FACTORY DEFAULTS
All the settings will be restored to the factory default.
❖ OSD COLOR | [BW, R/G/B] |
You can set the
ENG |