MicroDome Camera 200 Series | Installation en 15 |
|
|
3.5Power connection
The camera can accept power from both the DC12/24V power input and the Ethernet input at the same time. (Changing the power source might lead to a camera reboot.)
3.5.1DC power connection
(Not present on NDC-274-PM version.)
5 mm
(0.2 in)
22AWG
12 VDC
24 VDC
Figure 3.4 DC power connection
1.Slide the plug adapter that matches your outlet socket onto the supplied power supply.
2.Insert the power connector jack from the power supply into the DC12/24V socket of the camera.
3.Connect the power supply to either a 230 VAC or a 120 VAC power supply outlet.
Note:
A power supply is not included in the package.
Bosch Security Systems | Installation Manual |