18 en Installation | MicroDome Camera 200 Series |
|
|
3.7.1Camera positioning
The camera module position can be adjusted along two axes. When adjusting the camera position ensure that the picture display on the monitor is level.
CAUTION!
The image sensors are highly sensitive and require special care for proper performance and extended lifetime. Do not expose them to direct sunlight or bright spotlights in operating and
Set the camera to the desired position by performing the following steps:
1.For horizontal adjustment (pan) rotate the camera module in the base. Do not rotate more than 350°.
2.For vertical adjustment (tilt) rotate camera. Do not rotate more than 55°.
Installation Manual | Bosch Security Systems |