Axis Communications Q6042, Q6045 manual Bracket Mount sold separately

AXIS Q604 Series

1Trim ring

2Trim ring screw T20 (4x)

Bracket Mount (sold separately)

1.Install the selected bracket according to the instructions supplied with the bracket. If drilling is required, make sure to use drill bits, screws and plugs that are appropriate for the material.

2.Loosen the camera base lid screws and remove the camera base lid.

3.Route the network cable and the multi-connector cable, if applicable, through the holes in the mounting bracket.

4.Secure the camera using the supplied safety wire.

23