Transportation, Battery | Axis Communications Q1635 instruction

AXIS Q1635 Network Camera

Safety Instructions

NOTICE

•The Axis product shall be used in compliance with local laws and regulations.

•To use the Axis product outdoors, or in similar environments, it shall be installed in an approved outdoor housing.

•Store the Axis product in a dry and ventilated environment.

•Avoid exposing the Axis product to shocks or heavy pressure.

•Do not install the product on unstable brackets, surfaces or walls.

•Use only applicable tools when installing the Axis product. Excessive force could cause damage to the product.

•Do not use chemicals, caustic agents, or aerosol cleaners.

•Use a clean cloth dampened with pure water for cleaning.

•Use only accessories that comply with technical specification of the product. These can be provided by Axis or a third party.

•Use only spare parts provided by or recommended by Axis.

•Do not attempt to repair the product by yourself. Contact Axis support or your Axis reseller for service matters.

Transportation

NOTICE

•When transporting the Axis product, use the original packaging or equivalent to prevent damage to the product.

Battery

The Axis product uses a 3.0 V BR/CR2032 lithium battery as the power supply for its internal real-time clock (RTC). Under normal conditions this battery will last for a minimum of five years.

Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the battery needs replacing, a log message will appear in the product’s server report. For more information about the server report, see the product´s setup pages or contact Axis support.

The battery should not be replaced unless required, but if the battery does need replacing, contact Axis support at www.axis.com/techsup for assistance.