Replace the Lens

6.Turn the focus ring slowly counter-clockwise until the status indicator flashes green or amber (not red).

7.To exit the Focus Assistant, press the Function button again. The Focus Assistant is switched off automatically after 15 minutes.

8.Retighten the lock screw for the focus ring.

9.Open the Live View page in the web browser and check the quality of the image.

10.On the Focus page, click Fine-tune focus automatically and wait until automatic fine tuning is completed.

11.Click Enable iris. If the button is inactive the iris is already enabled.

12.If needed, make further adjustments under the Advanced tab. See the online help for more information.

It is possible to use optional lenses for the Axis product.

To replace the lens:

1.Disconnect the iris cable.

2.Unscrew the standard lens.

3.Attach and screw on the new lens. To change the iris configuration:

1.Go to Setup > Video and Audio > Camera Settings. Iris configuration shows the current configured iris type.

2.Click Edit.

3.Select the installed iris lens from the drop-down list and click OK.

To change the iris configuration for P-iris lenses not listed in the drop-down list:

1.Download the iris configuration file from www.axis.com

2.Go to Setup > Video and Audio > Camera Settings. Iris configuration shows the current configured iris type.

3.In Iris configuration : Click Edit.

4.Go to the Upload tab.

5.Click Browse and select the configuration file.

6.Click Upload. The installed iris lens should now be included in the Iris Selection drop-down list.

7.Select the installed iris lens from the drop-down list and click OK.