Axis Communications Q1602 Network, Basic TCP/IP Settings, IPv4 Address Configuration, ARP/Ping

Page 37

AXIS Q1602 Network Camera

System Options

To change the date and time settings, select the preferred Time mode under New Server Time:

•Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

•Synchronize with NTP Server obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration, on page 38.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 38.

•Set manually allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include time.

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version must always be enabled.

IPv4 Address Configuration

By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic.

DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of IP addresses. DHCP should only be enabled if using dynamic IP address notification, or if the DHCP can update a DNS server. It is then possible to access the Axis product by name (host name).

If DHCP is enabled and the product cannot be accessed, run AXIS IP Utility to search the network for connected Axis products, or reset the product to the factory default settings (see page 45) and then perform the installation again.

To use a static IP address, check Use the following IP address and specify the IP address, subnet mask and default router.

IPv6 Address Configuration

If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.

To enable IPv6, go to System Options > Network > TCP/IP > Basic. Other settings for IPv6 should be configured in the network router.

ARP/Ping

The IP address can be set using ARP and Ping. For instructions, see the product’s Installation Guide.

ARP/Ping is enabled by default. To disable, uncheck the box under System Options > Network > TCP/IP > Basic.

The ARP/Ping service is automatically disabled two minutes after the product is started, or as soon as an IP address is set. To reset the IP address, the product must be restarted to activate ARP/Ping for an additional two minutes.

Pinging the product is still possible when this service is disabled.

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Axis Q1602 Network Camera Liability About this documentIntellectual Property Rights Equipment ModificationsAxis Q1602 Network Camera Table of ContentsHardware Overview Hardware OverviewConnectors Status LED when using Focus Assistant LED IndicatorsColor Indication Replacing the lens Accessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariSet the Root Password Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certificateControls on the Live View Live ViewAxis Media Control viewer toolbar AMC Audio ControlsSpeaker button Click to turn the speakers on or off Half-duplex modeMedia Streams How to Stream H.264Media Streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsSetting Up the Product Setting Up the ProductBasic Setup Video and Audio Video and AudioVideo Stream ImageStream Profiles Click Save to apply the new settings264 Overlay Camera SettingsPrivacy Mask Date/Time Formats in the online help To enable overlaysOverlay Image Go to Video & Audio Video Stream and select the Image tabFocus Audio SettingsAudio Modes Audio InputAudio Output Audio ClipsG711 G726 Axis Q1602 Network Camera Live View Config Default Viewer for BrowsersLive View Config Go to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsFor more information about I/O ports, see I/O Ports, on Detectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsAudio Detection Default valuesLow level 0% Recommended valuesApplications ApplicationsEvents EventsRecipients Setting Up an Action RuleGo to Events Action Rules and click Add Recipient Use with actionRecurrences SchedulesGo to Events Recipients and click Add Go to Events Schedules and click AddRecordings RecordingsRecording List Continuous RecordingAxis Q1602 Network Camera System Options System OptionsSecurity UsersIeee Date & TimeAudio Support Network Basic TCP/IP SettingsIPv4 Address Configuration IPv6 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourNetwork Share Ports & DevicesPorts Go to System Options Storage Click Network ShareSupport MaintenancePort Status Support OverviewSystem Overview AdvancedLogs & Reports ScriptingPlain Config Reset to Factory Default SettingsTroubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyVideo and image problems, general Status and Network indicator LEDs are flashing red rapidlySetup Video & Audio Camera Settings No images displayed on webOverlay image is not displayed Problems uploading filesPrivacy mask is not displayed Browser freezesStorage and disk management problems SettingsTechnical Specifications Technical SpecificationsFunction/group Audio Audio streaming Alarm actionsInput/output Audio inputPerformance Considerations Axis Q1602 Network Camera M4.2
Related manuals
Manual 55 pages 57.81 Kb
Top Page Image Contents