Bosch Appliances LTC 9385 Enclosure Rating, Service Centers, Model Designation, NEMA-3R and IP54

Page 7

LTC 9385 Series Instruction Manual Unpacking

EN 7

 

 

1.0UNPACKING

This electronic equipment should be unpacked and handled carefully.

Check for the following items:

Quantity

Part Description

1

1/4-20 x 3/8in. BHCS (Button Head Cap

 

Screw)

1

1/4-20 x 1/2in. BHCS

1

1/4-20 x 5/8in. BHCS

1

1/4-20 x 3/4in. BHCS

1

1/4-20 x 7/8in. BHCS

4

3.2mm (0.125in.) plastic spacer

4

0.4mm (0.016in.) plastic spacer

2

Nylon bushings

1

3/8in. NPT plug

1

Small flex fitting

2

Pull Seals

2

Large flex fitting

3

Cable ties

If an item appears to have been damaged in shipment, replace it properly in its carton and notify the shipper. If any items are missing, notify your Bosch Security Systems Inc. Sales Representative or Customer Service.

The shipping carton is the safest container in which the unit may be transported. Save it for possible future use.

3.0CARE AND MAINTENANCE

There are no moving parts in this unit. Regularly scheduled maintenance will help prolong the operational life of this unit. Clean the viewing window as needed with a mild, nonabrasive detergent in water and a soft cloth.

4.0DESCRIPTION

The LTC 9385 Series of environmental housings are attractive aluminum enclosures designed for outdoor CCD camera installations.

4.1Enclosure Rating

4.1.1NEMA-3R and IP54

The LTC 9385 Series housings include a breather hole in the front face plate. The breather hole prevents the accumulation of moisture inside the housing when installed in areas of high humidity. With the breather hole open, the LTC 9385 Series housings meet the enclosure rating requirements of NEMA-3R and IP54.

4.1.2 NEMA-4 and IP65

For installations requiring an enclosure rating of NEMA-4 or IP65, the breather hole must be plugged using the pull seal (Part No. 315 2569 001) provided in the hardware kit. Refer to Final Assembly under INSTALLATION for proper installation.

2.0SERVICE

If the unit ever needs repair service, the customer should contact the nearest Bosch Security Systems, Inc. Service Center for return authorization and shipping instructions.

Service Centers

USA

Phone:

800-366-2283 or 717-735-6638

fax:

800-366-1329 or 717-735-6639

CCTV Spare Parts

Phone:

800-894-5215 or 408-956-3853 or 3854

fax:

408-957-3198

e-mail:

BoschCCTVparts@ca.slr.com

Canada

 

Phone:

514-738-2434

Europe, Middle East & Asia Pacific Region

Phone:

32-1-440-0711

For additional information, see www.boschsecurity.com.

5.0INSTALLATION

This installation should be made by a qualified service person and conform to all local codes.

5.1Model Designation

Model

Rated

Range

Power

No.

Input

 

Consumption1

LTC 9385/60

115VAC, 50/60Hz

108 to 132

50W

LTC 9385/20

24VAC, 50/60Hz

21.6 to 26.4

50W

LTC 9385/50

230VAC, 50/60Hz

207 to 253

50W

1Heater requires 40 watts.

Do Not Exceed 30VAC Input on 24VAC models. Operation above 30VAC violates low voltage operation (Class 2 Specifications). Normal operation is 24VAC.

Maximum Camera/Lens Size: Accepts cameras up to 102W x 71H mm (4.0 x 2.8in.), lenses up to 102W x 92H mm (4.0 x 3.6in.), and camera/lens combinations up to 345L mm (13.6in.).

Bosch Security Systems January 26, 2005

Image 7
Contents LTC 9385 Series Bosch Security Systems January 26 Important SafeguardsFor Outdoor Product For Indoor ProductFor Rack-mount Product SicherheitshinweiseSécurité Medidas de Segurança Sicurezza Table of Contents NEMA-3R and IP54 Service CentersEnclosure Rating Model DesignationCable Requirements Disassembly and MountingTools Required Hardware RequiredRemoving the Cover Camera/Lens InstallationLiquid-Tight Fittings Camera/Lens WiringSupply Power Connections Plug InsertionRecommended Maximum Cable Lengths Camera Power ConnectionsCamera Connections Video Coax ConnectionCamera/Lens Adjustment Lens WiringCamera/Lens Orientation Pull Seal Installation Final AssemblySupport Screw Adjustment Housing AssemblyExploded View Parts List