Axis Communications P3215-VE user manual Storage, Mount and Unmount SD Card, Format SD Card

Page 45

AXIS P3215-VE Network Camera

System Options

Storage

SD Card

NOTICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

Note

For SD card recommendations see www.axis.com

Supports microSD cards with up to 64 GB of storage. For best recording performance, use a microSDHC or microSDXC card with speed class 10.

The following SD card file systems are supported:

ext4 — recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

vFAT — supported by most operating systems for personal computers.

The SD card is managed on the System Options > Storage page. Click SD Card to open Storage Management.

If the card’s status shows as failed, click Check disk to see if the problem can be found and then try Repair. This option is only available for SD cards with ext4. For SD cards with vFAT, use a card reader or computer to troubleshoot the card.

To avoid filling the card, it is recommended to remove recordings continuously. Under General Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the card and protect recordings from being removed, select Lock under General Settings.

Mount and Unmount SD Card

NOTICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

The SD card is automatically mounted when the card is inserted into the Axis product or when the product is started. A manual mount is only required if the card has been unmounted and not ejected and re-inserted.

To unmount the SD card:

1.Open the Axis product’s webpages and go to Setup > System Options > Storage.

2.Click SD Card.

3.Click Unmount.

4.The card can now be removed.

Format SD Card

NOTICE

Formatting the SD card will remove all data and recordings stored on the card.

Important

If autoformat is enabled, only use new or empty SD cards. Any data stored on the card will be lost when the card is inserted into the Axis product.

An SD card inserted into the product can be manually formatted to one of the supported file systems. To manually format the SD card, follow these steps:

45

Image 45
Contents Axis P3215-VE Network Camera Legal Considerations About this documentLiability Intellectual Property RightsLearn More SupportAxis P3215-VE Network Camera Table of ContentsPerformance Considerations Network Connector Connectors and ButtonsHardware Overview SD Card SlotColor Indication LED IndicatorsAccess from a Browser Access the ProductAccess from the Internet Set the Root PasswordCamera Orientation Set Power Line FrequencyLive View Click Use HttpsControls on the Live View Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerPTZ Controls How to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis P3215-VE Network Camera Basic Setup Set Up the ProductWhen satisfied, click Enable iris to enable the iris Focus & ZoomVideo Stream VideoPixel Counter ImageClick Save to apply the new settings Stream Profiles264 Exposure Settings Camera SettingsImage Appearance White BalanceShutter & Gain Iris adjustmentSet Shutter to Day/NightView Area Select an Aspect ratio and a Video stream resolutionOverlay Go to Video View AreaOverlay Image Use Overlay Text in an Action RuleGo to Video Overlay Image Privacy Mask Create the action ruleGo to Events Action Rules Default Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionUser Defined Links Go to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom Guard TourAdvanced Control QueueControls Camera Tampering DetectorsMotion Detection Go to Detectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsAxis P3215-VE Network Camera Go to Setup Applications Install ApplicationApplications Application LicensesAxis P3215-VE Network Camera Events Setting Up an Action RuleAdd Recipients Go to Events Action Rules and click AddSet Up Email Recipients Set Up RecurrencesCreate Schedules Go to Events Schedules and click AddAxis P3215-VE Network Camera Recording List RecordingsContinuous Recording Go to Recordings ListLanguages Security System OptionsUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Go to Setup System Options Security Certificates Basic TCP/IP SettingsDate & Time NetworkIPv6 Address Configuration IPv4 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourSD Card StorageMount and Unmount SD Card Format SD CardNetwork Share MaintenanceTo add a network share Go to System Options Storage Click Network ShareSupport Overview SupportSystem Overview Logs & ReportsPlain Config Reset to Factory Default SettingsScripting File UploadUpgrade the Firmware TroubleshootingEmergency Recovery Procedure Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Video Camera Settings Key framesStorage disruption Storage and disk management problemsRe-mount the storage device Reformat the SD card and then click MountTechnical Specifications Installation Function/group Specifications System ApplicationMaintenance General Casing Memory PowerPerformance Considerations ConnectorsM2.2