Axis Communications P3215-VE Hardware Overview, Connectors and Buttons, Network Connector

Page 6

AXIS P3215-VE Network Camera

Hardware Overview

Hardware Overview

1Status LED indicator

2Control button

3Network connector (PoE)

4SD memory card slot

5Part number (P/N) & Serial number (S/N)

Connectors and Buttons

For technical specifications, see page 53.

Network Connector

RJ45 Ethernet connector with Power over Ethernet (PoE).

NOTICE

Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network cable (STP) may be appropriate or required. All cables connecting the product to the network and that are routed outdoors or in demanding electrical environments shall be intended for their specific use. Make sure that the network devices

are installed in accordance with the manufacturer’s instructions. For information about regulatory requirements, see Electromagnetic Compatibility (EMC) on page 2 .

SD Card Slot

A microSD card (not included) can be used for local recording with removable storage. For more information, see Technical Specifications on page 53.

NOTICE

To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

Note

For SD card recommendations see www.axis.com

Control Button

The control button is used for:

6

Image 6

Contents Axis P3215-VE Network Camera Liability About this documentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3215-VE Network CameraPerformance Considerations Hardware Overview Connectors and ButtonsNetwork Connector SD Card SlotLED Indicators Color IndicationAccess from the Internet Access the ProductAccess from a Browser Set the Root PasswordLive View Set Power Line FrequencyCamera Orientation Click Use HttpsAxis Media Control viewer toolbar Go to Setup EventsControls on the Live View Manual TriggerPTZ Controls How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis P3215-VE Network Camera When satisfied, click Enable iris to enable the iris Set Up the ProductBasic Setup Focus & ZoomPixel Counter VideoVideo Stream ImageClick Save to apply the new settings Stream Profiles264 Image Appearance Camera SettingsExposure Settings White BalanceSet Shutter to Iris adjustmentShutter & Gain Day/NightOverlay Select an Aspect ratio and a Video stream resolutionView Area Go to Video View AreaOverlay Image Use Overlay Text in an Action RuleGo to Video Overlay Image Privacy Mask Create the action ruleGo to Events Action Rules Viewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer DescriptionUser Defined Links PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions Guard TourAdvanced Control QueueControls Motion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAxis P3215-VE Network Camera Applications Install ApplicationGo to Setup Applications Application LicensesAxis P3215-VE Network Camera Add Recipients Setting Up an Action RuleEvents Go to Events Action Rules and click AddCreate Schedules Set Up RecurrencesSet Up Email Recipients Go to Events Schedules and click AddAxis P3215-VE Network Camera Continuous Recording RecordingsRecording List Go to Recordings ListLanguages Users System OptionsSecurity IP Address FilterIeee CertificatesGo to System Options Security Ieee Date & Time Basic TCP/IP SettingsGo to Setup System Options Security Certificates NetworkAssign IP Address Using ARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration ARP/PingAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM BonjourMount and Unmount SD Card StorageSD Card Format SD CardTo add a network share MaintenanceNetwork Share Go to System Options Storage Click Network ShareSystem Overview SupportSupport Overview Logs & ReportsScripting Reset to Factory Default SettingsPlain Config File UploadEmergency Recovery Procedure TroubleshootingUpgrade the Firmware Check the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo Camera Settings Problems with streaming H.264Video and image problems, general Key framesRe-mount the storage device Storage and disk management problemsStorage disruption Reformat the SD card and then click MountTechnical Specifications Maintenance General Casing Function/group Specifications System ApplicationInstallation Memory PowerConnectors Performance ConsiderationsM2.2