Bosch Appliances GVS1000 manual Troubleshooting, General

Page 22

22 en TroubleshootingGlobal View Station 1000

5

Troubleshooting

5.1

General

 

 

 

 

 

Symptom

 

 

Possible Solution

 

 

 

No Pan/Tilt movement when

 

Check that the main power is on. Main power is on when the Power LED located

using a keyboard to control the

 

on the power supply case is on. If main power is off, then check the main power

unit

 

 

connection and the two fuses located in the power supply unit.

 

 

 

Check that the address on the controlling device matches the address of the

 

 

 

GVS1000.

 

 

 

If the Error LED on the code translator (in the power supply) is on, then the

 

 

 

protocol reaching the box is corrupt. Check the Tx/Rx lines for continuity. Check

 

 

 

that the GVS1000 controlling device is outputting valid protocol.

 

 

 

Check that the auxiliary control board is receiving valid protocol. The green LED

 

 

 

(LED 10) is blinking when valid communication is received by the auxiliary control

 

 

 

board.

 

 

 

Use the diagnostics mode on the auxiliary control board to test motor movement.

 

 

 

(refer to Section 5.2 Troubleshooting with Diagnostic Mode, page 23).

 

 

 

No Pan/Tilt movement when

 

Check that the green terminal blocks are disconnected from the code translator

using the PTCR20 software

 

(in the power supply unit).

 

 

 

Check the correct COM port and baud rate (9600bps) is selected in the software.

 

 

 

The COM port on the computer used to communicate with the GVS1000 is

 

 

 

computer dependent.

 

 

 

The Pan/Tilt motor drifts when

 

The Pan/Tilt motor drifts when the communication lines are incorrectly

trying to control the GVS1000

 

terminated. The termination for the auxiliary control board is set through jumper

 

 

 

JP6. The termination for the camera board is set through jumper JP3. Toggle the

 

 

 

termination on the camera control board first to solve the drifting problem. If the

 

 

 

problem persists, the auxiliary control board termination can be toggled as well

 

 

 

to solve the issue.

 

 

 

 

No image

 

 

Check that the main power is on. Main power is on when the Power LED located

 

 

 

on the power supply case is on. If main power is not on, then check the main

 

 

 

power connection and the two fuses located in the power supply unit.

 

 

 

Check that the video connection is contiguous.

 

 

 

Check that auxiliary 4 is off. When auxiliary 4 is turned on (manual iris control)

 

 

 

the iris will close completely (for protection purposes). When the iris is

 

 

 

completely closed, no image will appear on screen.

 

 

 

 

Fuzzy image

 

 

Verify that the housing front glass is clean. The GVS1000 is equipped with a wiper

 

 

 

(controlled through Aux 2).

 

 

 

The image may be out of focus. Focus the image using the controlling device.

 

 

 

The lens IR filter (Aux 5) setting could be used incorrectly. When the scene

 

 

 

consists of predominantly visible light, leave the lens IR filter off (auxiliary 5 off).

 

 

 

When the scene consists of predominantly IR light, turn on the lens IR filter (Aux 5

 

 

 

on).

 

 

 

Zoom/Focus stalls when using

 

Presets should not be set with maximum/minimum zoom or maximum near/far

presets

 

 

focus. Manual override with a controlling device will resume the GVS1000 to

 

 

 

normal operation.

 

 

 

 

F.01U.173.867 2.0 2010.11

Operations Manual

Bosch Security Systems, Inc.

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Global View Station Page Table of Contents En Table of ContentsGlobal View Station 1Safety Important safety instructionsEn Safety Global View Station Important notices Safety precautionsCoax grounding Rack-mount SelvFCC & Ices Information A. and Canadian Models OnlyTrademarks CopyrightMore information Customer Support and Service Pan/Tilt PresetsStandard Operations Zoom and Focus ControlPreset Tours Soft LimitsAux 1 Doubler On/Off Auxiliary FunctionsAux 2 Wiper On/Off Aux 4 Iris Control Aux 6 Camera Color/Mono ModeAux 3 Illuminator Control Aux 5 Lens IR Correction On/OffAux 7 ZX700 On/Off Aux 8 Sled LED On/OffCode Translator Unit Pelco Support2Biphase Support 4Camera Default Configuration LockShutter/AGC ModeSubmenu Function Value Day/NightAlarm I/O Installer MenuSubmenu Function Value Lens Wizard Troubleshooting General2Troubleshooting with Diagnostic Mode Troubleshooting with Diagnostic Mode,Test Software PTCR-20 Software OperationUsing the PTCR-20 Software PTCR-20 Main ScreenDefault Parameters Using PTCR-20 to Set Soft Limits and Camera ControlPTCR-20 Soft Limit Configuration 3Inverting Tilt Controls Other MenusAuxiliary Control Board Component DescriptionPhotocell Control Adjustments Reset ButtonSelf Test Diagnostic Function Address SelectionAuxiliary Controls Voltage Touch Points Camera Control Board DIP2Camera Control Power Indicator 6Termination JumpersCN1 connection to lens Page Page Bosch Security Systems, Inc

GVS1000 specifications

Bosch Appliances has long been a trusted name in the realm of household appliances, synonymous with quality, performance, and innovation. One of its standout products is the Bosch GVS1000, a high-performance vacuum cleaner designed to meet the needs of modern households. Packed with advanced features, the GVS1000 promises to offer an efficient cleaning experience.

One of the main features of the Bosch GVS1000 is its powerful motor, which delivers impressive suction capabilities. This ensures that dirt, dust, and debris are effectively removed from various surfaces, including carpets, hardwood floors, and upholstery. The vacuum's lightweight design allows for easy maneuverability, making it ideal for both quick clean-ups and more extensive cleaning sessions.

A standout technology in the Bosch GVS1000 is its Bagless Cyclonic System. This innovative feature utilizes centrifugal force to separate dirt and dust from the air, resulting in consistent suction power and reduced maintenance. Users can easily empty the dust container with the touch of a button, eliminating the inconvenience of dealing with messy vacuum bags.

Another notable characteristic of the GVS1000 is its advanced filtration system, which includes a HEPA filter. This filter captures allergens and fine particles, making it an excellent choice for allergy sufferers. The GVS1000 is designed to enhance indoor air quality, trapping up to 99.97% of particles as small as 0.3 microns, ensuring a clean and healthy living environment.

The appliance's ergonomic design features a comfortable grip handle and a user-friendly interface, making it simple to operate. Multiple cleaning modes and adjustable suction settings cater to a variety of cleaning tasks, from delicate fabrics to stubborn debris, ensuring optimal performance for every job.

In terms of accessories, the Bosch GVS1000 comes equipped with a range of tools to enhance its versatility. These include a crevice tool for narrow spaces, a dusting brush for delicate surfaces, and an upholstery nozzle for furniture, making it a comprehensive cleaning solution for any home.

Durability and a sleek aesthetic are additional characteristics of the Bosch GVS1000, allowing it to blend seamlessly with contemporary home decor while providing long-lasting performance. Overall, the Bosch GVS1000 stands out as a reliable, powerful, and efficient vacuum cleaner that effectively meets the demands of today’s households, redefining the cleaning experience with its innovative features and technologies.
Top Page Image Contents